2SD1947A_06 TOSHIBA

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 5

Technical content

TOSHIBA Transistor Silicon NPN Epitaxial Type 2SD1947A High-Current Switching Applications Lamp, Solenoid Drive Applications

  • High DC current gain: h FE = 500 to 1500 (IC = 1 A)
  • Low collector saturation voltage: VCE (sat) = 0.3 V (max) (IC = 5 A) Absolute Maximum Ratings (Tc = 25°C) Characteristics Symbol Rating Unit Collector-base voltage VCBO 100 V Collector-emitter voltage VCEO 100 V Emitter-base voltage VEBO 7 V DC I C 10 Collector current Pulse I CP 15 A Base current IB 2 A Ta = 25°C 2.0 Collector power dissipation Tc = 25°C PC W Junction temperature Tj 150 °C Storage temperature range Tstg −55 to 150 °C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Equivalent Circuit Unit: mm JEDEC ― JEITA ― TOSHIBA 2-10R1A Weight: 1.7 g (typ.) Base Emitter Collector

Electrical Characteristics (Tc = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = 100 V, IE = 0 ― ― 10 μA Emitter cut-off current IEBO VEB = 7 V, IC = 0 ― ― 10 μA Collector-emitter breakdown voltage V (BR) CEO IC = 50 mA, IB = 0 100 ― ― V hFE (1) V CE = 1 V, IC = 1 A 500 ― 1500 DC current gain hFE (2) V CE = 1 V, IC = 5 A 150 ― ― Collector-emitter saturation voltage V CE (sat) I C = 5 A, IB = 0.05 A ― ― 0.3 V Base-emitter saturation voltage V BE (sat) I C = 5 A, IB = 0.05 A ― ― 1.2 V Collector-emitter forward voltage V ECF IE = 5 A, IB = 0 ― ― 2.0 V Transition frequency fT VCE = 5 V, IC = 1 A ― 70 ― MHz Collector output capacitance Cob VCB = 10 V, IE = 0, f = 1 MHz ― 160 ― pF Turn-on time ton ― 0.5 ― Storage time tstg ― 6.0 ― Switching time Fall time t f IB1 = −IB2 = 0.05 A, duty cycle ≤ 1% ― 1.0 ― μs Marking IB1 20 μs VCC = 30 V Output 6 Ω IB2 IB1Input IB2 Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. D1947A Part No. (or abbreviation code)

Collector current I C (A) VCE – IC Collector-emitter voltage V CE (V) Collector current I C (A) VCE – IC Collector-emitter voltage V CE (V) Collector-emitter voltage V CE (V) IC – VCE Collector current I C (A) Collector current I C (A) VCE – IC Collector-emitter voltage V CE (V) Collector current I C (A) hFE – IC DC current gain h FE Collector current I C (A) VCE (sat) – IC Collector-emitter saturation voltage VCE (sat) (V) Common emitter Ta = 100°C 0.2 0.4 0.6 0.8 1.0 1.2 2 4 6 8 10 12 14 16 100 IB = 5 mA 10 20 40 60 80 150 200 300 IB = 2 mA Common emitter Tc = 25°C 4 8 12 16 20 4050 60 80 0.1 Common emitter VCE = 1 V 100 300 500 1000 3000 0.3 0.5 1 3 5 10 30 −55 Tc = 100°C Common emitter IC/IB = 100 0.1 0.03 0.05 0.1 0.3 0.5 0.3 0.5 1 3 5 10 30 −55 Tc = 100°C Common emitter Tc = 25°C 100 0.2 0.4 0.6 0.8 1.0 1.2 2 4 6 8 10 12 14 16 IB = 5 mA 10 20 40 60 80 150 200 300 Common emitter Tc = −55°C 0.2 0.4 0.6 0.8 1.0 1.2 2 4 6 8 10 12 14 16 100 IB = 5 mA 10 20 40 60 80 150 200 300

Collector-emitter voltage V CE (V) Collector current I C (A) Collector current I C (A) VBE (sat) – IC Base-emitter saturation voltage VBE (sat) (V) Base-emitter voltage V BE (V) IC – VBE Collector current I C (A) Common emitter VCE = 1 V −5525Tc = 100°C 0.1 0.1 Common emitter IC/IB = 100 0.3 0.5 1 3 5 10 30 0.3 0.5 100 25 Tc = −55°C 1 3 5 10 30 50 100 300 0.05 0.1 0.3 0.5 *: Single nonrepetitive pulse Tc = 25°C Curves must be derated linearly with increase in temperature. 10 ms* 100 μs* IC max (pulsed)* IC max (continuous) 100 ms* 1 ms* DC operation Tc = 25°C VCEO max Pulse width t w ( s ) rth – tw Transient thermal resistance r th (°C/W) 0.001 1000 100 0.01 0.1 0.3 100 10 1 0.1 Curves should be applied in thermal limited area. (single nonrepetitive pulse) (1) Infinite heat sink (Tc = 25°C) (2) No heat sink (1) (2)

RESTRICTIONS ON PRODUCT USE 20070701-EN

  • The information contained herein is subject to change without notice.
  • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity an d vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
  • The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
  • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
  • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
  • Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.