2SD1160_06 TOSHIBA
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 5
Technical content
TOSHIBA Transistor Silicon NPN Epitaxial Type (PCT Process) 2SD1160 Switching Applications Suitable for Motor Drive Applications
- High DC current gain
- Low saturation voltage: V CE (sat) = 0.6 V (max) (IC = 2A, IB = 40 mA)
- Built-in free wheel diode Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Collector-base voltage VCBO 50 V Collector-emitter voltage VCEO 20 V Emitter-base voltage VEBO 6 V DC I C 2 Collector current Pulse I CP 4 A Diode forward surge current (t = 1 s) I FP 1 A Ta = 25°C 1 Collector power dissipation Tc = 25°C PC W Junction temperature Tj 150 °C Storage temperature range Tstg −55 to 150 °C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Equivalent Circuit Unit: mm JEDEC ― JEITA ― TOSHIBA 2-7B1A Weight: 0.36 g (typ.) COLLECTOR BASE EMITTER≈ 800 Ω
Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO V CB = 50 V, IE = 0 ― ― 1 μA Emitter cut-off current IEBO V EB = 5 V, IC = 0 2.5 6.25 15 mA Collector-emitter sustaining voltage V CEO (SUS) IC = 20 mA, L = 40 mH 20 ― ― V hFE (1) (Note) VCE = 2 V, IC = 1 A 100 ― 300 DC current gain hFE (2) V CE = 2 V, IC = 2 A 60 ― ― Collector emitter saturation voltage V CE (sat) I C = 2 A, IB = 40 mA ― 0.4 0.6 V Base-emitter saturation voltage V BE (sat) I C = 2 A, IB = 40 mA ― ― 1.5 V Emitter-collector forward voltage VECF I E = 1 A, IB = 0 ― ― 2.0 V Note: h FE (1) classification O: 100 to 200, Y: 150 to 300 Classification Min Max 2SD1160-O 100 200 2SD1160-Y 150 300 Marking D1160 Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. Characteristics indicator Part No. (or abbreviation code)
Collector-emitter voltage V CE (V) IC – VCE Collector current I C (A) Collector current I C ( m A ) hFE – IC DC current gain h FE Collector current I C ( m A ) VCE (sat) – IC Collector-emitter saturation voltage VCE (sat) (V) Collector current I C ( m A ) VBE (sat) – IC Base-emitter saturation voltage VBE (sat) (V) 1.0 IB = 2 mA 0.2 0.4 2 4 8 10 14 0.6 6 12 0.8 Common emitter Tc = 25°C 100 300 1000 10 100 300 1000 Common emitter VCE = 2 V 30 3000 500 Tc = 100°C −25 100 100 300 1000 300030 0.03 0.05 0.1 0.3 0.5 Tc = −25°C Common emitter IC/IB = 50 100 300 1000 3000 30 0.2 0.5 Common emitter IC/IB = 50 100 Tc = −25°C Emitter-collector forward voltage V ECF (V) IE – VECF Emitter current I E ( m A ) 1000 100 300 500 IB = 0 Tc = 100°C 0.6 1.0 1.6 −25 Pulse width t w ( s ) rth – tw Transient thermal resistance r th (°C/W) 1000 10 m 1 100 1 m 0.1 100 Curves apply only to limited areas of thermal resistance. (Single nonrepetitive pulse) Tc = 25°C 100 m 10 1000
Collector-emitter voltage V CE (V) Safe Operating Area Collector current I C (A) Ambient temperature Ta (°C) PC – Ta Collector power dissipation P C (W) 1.2 0 20 40 60 80 100 120 160 0.2 0.4 0.6 0.8 1.0 140 0.01 10 20 40 50 70 30 60 0.5 Operating conditions used for a test circuit shown in Figure 1 must not exceed this shaded area. Tc = 25°C Figure 1 Safe Operating Area Test Circuit 2 ms 3 ms INPUT 10 V VCC 330 Ω T.U.T L = 10 mH
RESTRICTIONS ON PRODUCT USE 20070701-EN
- The information contained herein is subject to change without notice.
- TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity an d vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
- The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
- The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
- The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
- Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.