2SC5858 TOSHIBA

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 6

Technical content

TOSHIBA TRANSISTOR SILICON NPN TRIPLE DIFFUSED MESA TYPE 2SC5858 HORIZONTAL DEFLECTION OUTPUT FOR HDTV, DIGITAL TV, PROJECTION TV z High Voltage : V CBO = 1700 V z Low Saturation Voltage : V CE (sat) = 1.5 V (Max) z High Speed : tf(2) = 0.1 μs (Typ.) ABSOLUTE MAXIMUM RATINGS (Tc = 25°C) CHARACTERISTIC SYMBOL RATING UNIT Collector−Base Voltage V CBO 1700 V Collector−Emitter Voltage V CEO 750 V Emitter−Base Voltage V EBO 5 V DC I C 22 Collector Current Pulse ICP 44 A Base Current IB 11 A Collector Power Dissipation PC 200 W Junction Temperature Tj 150 °C Storage Temperature Range Tstg −55~150 °C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Unit: mm JEDEC ― JEITA ― TOSHIBA 2-21F2A Weight: 9.75 g (typ.)

ELECTRICAL CHARACTERISTICS (Tc = 25°C) CHARACTERISTIC SYMBOL TEST CONDITION MIN TYP. MAX UNIT Collector Cut−off Current I CBO VCB = 1700 V, IE = 0 ― ― 1 mA Emitter Cut−off Current IEBO VEB = 5 V, IC = 0 ― ― 100 μA Collector − Emitter Breakdown Voltage V (BR) CEO IC = 10 mA, IB = 0 750 ― ― V hFE (1) VCE = 5 V, IC = 2 A 30 ― 60 hFE (2) VCE = 5 V, IC = 8 A 11 ― 19 DC Current Gain hFE (3) VCE = 5 V, IC = 17 A 5 ― 7.5 Collector−Emitter Saturation Voltage V CE (sat) IC = 17 A, IB = 4.25 A ― ― 1.5 V Base−Emitter Saturation Voltage V BE (sat) IC = 17 A, IB = 4.25 A ― 1.0 1.5 V Transition Frequency fT VCE = 10 V, IC = 0.1 A ― 2 ― MHz Collector Output Capacitance Cob VCB = 10 V, IE = 0, f = 1 MHz ― 280 ― pF Storage Time t stg(1) ― 4.5 ― Fall Time tf(1) ICP = 9 A , IB1 (end) = 1.4 A fH = 32 kHz ― 0.1 ― μs Storage Time t stg(2) ― 3.5 ― Switching Time Fall Time t f(2) ICP = 8 A, IB1 (end) = 1.2 A fH = 45 kHz ― 0.1 ― μs

Collector-emitter voltage V CE (V) IC – VCE Collector current I C (A) Collector current I C (A) hFE – IC DC current gain h FE 100 0.01 Tc = 100°C −25 0.1 10 100 Common emitter VCE = 5 V Collector current I C (A) Base−emitter voltage V BE (V) IC – VBE −25 Tc = 100°C Common emitter VCE = 5 V 0.8 2 4 6 8 10 Common emitter Tc = 25℃ 0.6 1.5 2.0 IB = 0.2 A 4.0 2.5 0.8 1.2 0.4 1.0 3.0 3.5

Collector current I C (A) VCE (sat) – IC Collector-emitter saturation voltage VCE (sat) (V) 100 1 0.1 0.01 Common emitter Tc = 25℃ IC/IB = 4 Collector current I C (A) VCE (sat) – IC Collector-emitter saturation voltage VCE (sat) (V) 0.1 0.01 100 1 10 Common emitter Tc = 100℃ IC/IB = 4 Base current I B (A) VCE – IB Collector-emitter voltage V CE (V) Ic = 17 A Common emitter Tc = −25℃ Base current I B (A) VCE – IB ollector-emitter voltage V CE (V) Common emitter Tc = 25℃ Ic = 17 A VCE(sat) – IC Collector-emitter saturation voltage VCE(sat) (V) Collector current I C (A) 0.01 0.1 10 100 Common emitter Tc = −25℃ IC/IB = 4 Collector-emitter voltage V CE (V) Base current I C (A) VCE – IB 4.0 0 0.8 1.6 3.2 Ic = 17 A 2.4 Common emitter Tc = 100℃

Collector power dissipation P C (W) Case temperature Tc (°C) PC – Tc 0 25 75 100 125 150 150 200 250 100 Infinite heat sink Collector-emitter voltage V CE (V) Reverse Bias – Safe Operating Area Collector current I C (A) 100 0.1 0.001 10000 10 100 0.01 1000 Ta = 25℃ Non repeated pulse IB2 = −3A L = 500 μH VCBO max IC max (Pulse) 495V,44A 1700V,30mA rth(j-c) – tw Transient thermal impedance (junction−case) r th(j-c) (°C/W) Pulse width t w ( s ) 0.001 10μ 1000 100μ 1m 100m 10 100 0.01 0.1 10m 1 Tc = 25℃ (Infinite heat sink) Curves should be applied in thermal limited area. (single nonrepetitive pulse) Collector-emitter voltage V CE (V) Safe Operating Area Collector current I C (A) 0.01 100 1 100 100010 0.1 1 ms* 10 ms* VCEO max 100 μs* 100 ms* IC max (Continuous)* 10 μs* DC operation Tc = 25°C *: Single nonrepetitive pulse Tc = 25°C Curves must be derated linearly with increase in temperature. IC max (Pulse)*

RESTRICTIONS ON PRODUCT USE 20070701-EN

  • The information contained herein is subject to change without notice.
  • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity a nd vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
  • The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
  • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
  • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
  • Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.