2SC5755 TOSHIBA
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 5
Technical content
TOSHIBA Transistor Silicon NPN Epitaxial Type 2SC5755 High-Speed Switching Applications DC-DC Converter Applications Strobe Applications /Gb7/G20High DC current gain: hFE = 400 to 1000 (IC = 0.2 A) /Gb7/G20Low collector-emitter saturation voltage: VCE (sat) = 0.12 V (max) /Gb7/G20High-speed switching: tf = 25 ns (typ.) Maximum Ratings (Ta /G3d/G3d/G3d/G3d 25°C) Characteristics Symbol Rating Unit Collector-base voltage V CBO 20 V Collector-emitter voltage V CEO 10 V Emitter-base voltage V EBO 7 V DC I C 2 Collector current Pulse I CP 3.5 A Base current I B 200 mA DC 500 Collector power dissipation t /G3d 10 s P C (Note) 750 mW Junction temperature T j 150 °C Storage temperature range T stg /G2d55 to 150 °C Note: Mounted on FR4 board (glass epoxy, 1.6 mm thick, Cu area: 645 mm2) Electrical Characteristics (Ta /G3d/G3d/G3d/G3d 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current I CBO V CB /G3d 20 V, IE /G3d 0 /Gbe /Gbe 100 nA Emitter cut-off current I EBO V EB /G3d 7 V, IC /G3d 0 /Gbe /Gbe 100 nA Collector-emitter breakdown voltage V (BR) CEO IC /G3d 10 mA, IB /G3d 0 10 /Gbe /Gbe V hFE (1) VCE /G3d 2 V, IC /G3d 0.2 A 400 /Gbe 1000 DC current gain hFE (2) VCE /G3d 2 V, IC /G3d 0.6 A 200 /Gbe /Gbe Collector-emitter saturation voltage V CE (sat) I C /G3d 0.6 A, IB /G3d 12 mA /Gbe /Gbe 0.12 V Base-emitter saturation voltage V BE (sat) I C /G3d 0.6 A, IB /G3d 12 mA /Gbe /Gbe 1.10 V Rise time t r /Gbe 60 /Gbe Storage time t stg /Gbe 215 /Gbe Switching time Fall time t f See Figure 1 circuit diagram. VCC ≈ 6 V, RL /G3d 10 /G57 IB1 /G3d /G2dIB2 /G3d 12 mA /Gbe 25 /Gbe ns Unit: mm JEDEC ― JEITA ― TOSHIBA 2-3S1C Weight: 0.01 g (typ.)
Figure 1 Switching Time Test Circuit & Timing Chart IB2 IB1 20 /G6ds Output Input IB2 IB1 RL VCC Duty cycle /G3c 1%
Collector current I C (A) Base-emitter saturation voltage VBE (sat) (V) Collector-emitter voltage V CE (V) IC /G2d VCE Collector current I C (A) Collector current I C (A) hFE /G2d IC DC current gain h FE Collector current I C (A) VCE (sat) /G2d IC Collector-emitter saturation voltage VCE (sat) (V) Collector current I C (A) VBE (sat) /G2d IC Base-emitter voltage V BE (V) IC – VBE hFE /G2d IC 30 40 IB /G3d 2mA 0 1.2 0.8 0.4 0.4 0.8 1.2 1.6 2.4 0.2 0.6 1.0 Common emitter Ta /G3d 25 °C Single nonrepetitive pulse Ta /G3d 100°C /G2d55 0.001 0.001 0.01 0.1 0.003 0.03 0.3 Common emitter IC/IB /G3d 50 Single nonrepetitive pulse Ta /G3d 100°C 25 /G2d55 0.01 0.001 0.1 0.03 0.3 Common emitter IC/IB /G3d 50 Single nonrepetitive pulse 0.4 0.8 1.2 1.6 Ta /G3d 100°C /G2d55 1.6 1.2 0.8 0.4 0 Common emitter VCE /G3d 2 V Single nonrepetitive pulse Ta /G3d 100°C /G2d55 0.001 100 1000 10000 300 3000 Common emitter VCE /G3d 2 V Single nonrepetitive pulse
rth – tw Collector-emitter voltage V CE (V) Safe Operating Area Collector current I C (A) Pulse width t w (s) Transient thermal resistance rth (j-a) (°C/W) 0.001 100 1000 300 1 3 10 300 1000 30 100 Curves should be applied in thermal limited area. Single nonrepetitive pulse T a /G3d 25°C Mounted on FR4 board (glass epoxy, 1.6 mm thick, Cu area: 645 mm2) *: Single nonrepetitive pulse Ta /G3d 25°C Note that the curves for 100 ms, 10 s and DC operation will be different when the devices aren’t mounted on an FR4 board (glass epoxy, 1.6 mm thick, Cu area: 645 mm 2). These characteristic curves must be derated linearly with increase in temperature. VCEO max 10 s* 10 ms* 1 ms* 100 /G6ds* 100 ms* 0.03 0.01 0.1 1 10 30 100 0.03 0.1 0.3 DC operation (Ta /G3d 25°C) IC max (continuous) IC max (pulsed)* 3 0.3
/Gb7/G20TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. /Gb7/G20The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. /Gb7/G20The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. /Gb7/G20The information contained herein is subject to change without notice. 000707EAARESTRICTIONS ON PRODUCT USE