2SC5548_05 TOSHIBA

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 5

Technical content

TOSHIBA Transistor Silicon NPN Triple Diffused Type 2SC5548 High Voltage Switching Applications Switching Regulator Applications DC-DC Converter Applications

  • High speed switching: tr = 0.5 µs (max), tf = 0.3 µs (max) (IC = 0.8 A)
  • High collector breakdown voltage: VCEO = 370 V
  • High DC current gain: hFE = 60 (min) (IC = 0.2 A) Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Collector-base voltage V CBO 600 V Collector-emitter voltage V CEO 370 V Emitter-base voltage V EBO 7 V DC I C 2 Collector current Pulse I CP 4 A Base current I B 0.5 A Ta = 25°C 1.0 Collector power dissipation Tc = 25°C PC W Junction temperature T j 150 °C Storage temperature range T stg −55 to 150 °C Unit: mm JEDEC ― JEITA ― TOSHIBA 2-7B1A Weight: 0.36 g (typ.) JEDEC ― JEITA ― TOSHIBA 2-7J1A Weight: 0.36 g (typ.)

Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current I CBO V CB = 480 V, IE = 0 ― ― 20 µA Emitter cut-off current I EBO V EB = 7 V, IC = 0 ― ― 10 µA Collector-base breakdown voltage V (BR) CBO IC = 1 mA, IE = 0 600 ― ― V Collector-emitter breakdown voltage V (BR) CEO IC = 10 mA, IB = 0 370 ― ― V hFE (1) V CE = 5 V, IC = 1 mA 50 ― 120 DC current gain hFE (2) V CE = 5 V, IC = 0.2 A 60 ― 120 Collector emitter saturation voltage V CE (sat) I C = 0.8 A, IB = 0.1 A ― ― 1.0 V Base-emitter saturation voltage V BE (sat) I C = 0.8 A, IB = 0.1 A ― ― 1.3 V Rise time t r ― ― 0.5 Storage time t stg ― ― 3.0 Switching time Fall time t f IB1 = 0.1 A, IB2 = −0.2 A DUTY CYCLE ≤ 1% ― ― 0.3 µs Marking C5548 Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. Part No. (or abbreviation code) IB1 20 µs V CC ≈ 200 V INPUT OUT- PUT 250 Ω IB21 IB1 IB2 IC

(1) Tc = T a infinite heat sink (2) No heat sink 0 25 50 75 100 125 150 175 200 (1) (2) Base-emitter saturation voltage VBE (sat) ( V ) Collector-emitter voltage V CE (V) IC – VCE Collector current I C ( A ) Collector current I C (A) hFE – IC DC current gain h FE Collector current I C (A) VCE (sat) – IC Collector-emitter saturation voltage VCE (sat) (V) Collector current I C (A) VBE (sat) – IC Base-emitter voltage V BE (V) IC – VBE Collector current I C ( A ) Collector power dissipation P C (W) Ambient temperature Ta (°C) PC – Ta 100 Common emitter Tc = 2 5 ° C 150 IB = 10 mA 1.6 1.2 0.4 2 4 6 8 10 0.8 2.0 200 0.01 Common emitter IC/IB = 8 Tc = 100°C −55 0.3 0.03 0.03 0.3 1 10 0.1 0.1 3 0.4 2.0 0 1.6 0.8 1.2 1.6 0.4 0.8 1.2 Common emitter VCE = 5 V Tc = 100°C −55 25 1000 0.001 Common emitter VCE = 5 V Tc = 100°C −55 300 100 0.01 Tc = 100°C 25 −55 0.3 0.1 0.1 0.3 3 Common emitter IC/IB = 8 0.03 1

Transient thermal resistance r th ( ° C / W ) Collector-emitter voltage V CE (V) Safe Operating Area Collector current I C ( A ) rth – tw Pulse width t w (s) Collector current I C (A) Switching Characteristics – IC Switching time (µs) Curves should be applied in thermal limited area. (single nonrepetitive pulse) (1) Infinite heat sink (2) No heat sink 300 0.5 0.001 1000 0.01 0.1 1 10 100 100 (1) (2) IC = 8IB1 2IB1 = −IB2 VCC ≈ 200 V Pulse width = 20µs Duty cycle ≤ 1% Tc = 25°C 0.1 0.1 0.3 0.5 1 3 5 10 0.3 0.5 tstg tf *: Single nonrepetitive pulse Tc = 2 5 ° C Curves must be derated linearly with increase in temperature. IC max (continuous) 0.001 DC operation Tc = 25°C 1 ms* 10 ms* VCEO max 100 µs* 100 ms* IC max (pulsed)* 1 3 100 100010 30 300 0.1 0.01 10 µs*3 0.3 0.5 0.03 0.05 0.003 0.005

  • The information contained herein is subject to change without notice.
  • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others.
  • TOSHIBA is continually working to improve the quality an d reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc..
  • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk.
  • TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. 030619EAARESTRICTIONS ON PRODUCT USE