2SC5318 TOSHIBA

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 1

Technical content

TENTATIVE TOSHIBA TRANSISTOR SILICON NPN EPITAXIAL PLANAR TYPE VHF~UHF BAND LOW NOISE AMPLIFIER APPLICATIONS Unit in mm 402 @ Low Noise Figure :NF=1.3dB (f=2GHz) 29-03 a e High Gain :Ga=11.5dB (f=2GHz) eH Sa MAXIMUM RATINGS (Ta = 25°C) $I | | q 2 3 Collector-Base Voltage VcBo. ; 8s | v | 0.55. on 0.85 Collector-Emitter Voltage VCEO 3), ! ~ 33 SL, [Base Current | wT tm - 3 Collector Power Dissipation FA 1, 3. EMITTER Storage Temperature Range —55~125 2. BASE - 4. COLLECTOR Marking

1 Type Name

TOSHIBA __2-3J1C BS Weight : 0.012g 3.4 MICROWAVE CHARACTERISTICS (Ta = 25°C) CHARACTERISTIC SYMBOL TEST CONDITION | aa. | rye. [wax. [unr] VoE=aV, Ig=i5mA [as [a6 | — | om | . j So1el2 (1) [VoR=8V, Ic=15mA, f=1GHz | 145 | 17/[ — | Insertion Gain Sarel*(2) [VoR=3V, Io=15ma, f=2GHe | 8.6 | 115 | — | =3V, Ig=5mA, f= 16h NF (2)_[Vcp=8V, Ig=imA, f=2Gn2 | — | 18 | 22| ELECTRICAL CHARACTERISTICS (Ta = 25°C) CHARACTERISTIC SYMBOL TEST CONDITION | xan. | rye. Max. [unr] Collector Cut-off Current Vop=i0V, Tao [—[—[ 7 [ea] Emitter Cutoff Current Vep=1V, Io=0 b= p= P ofa DC Current Gain Vop=8V, Ig=16mA | 60 | — | 260] v | Output Capacitance Vop=2.5V, Ig=0, f=1MHz | — | 0.6 | — | pF | Reverse Transfer Capacitance ote) — | 04 | — [oF | (Note) : Cre is measured by 3 terminal method with Capacitance Bridge. CAUTION : This device electrostatic sensitivity. Please handle with caution. 261001EAA2 @ TOSHIBA is continually working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fall due to their inherent electrical Sensitivity and vulnerability to physical stres. itis the responsibilty of the buyer, when utliing TOSHIBA products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent products specifications. Also, please keep in mind the precautions and conditions set forth in the TOSHIBA Semiconductor Reliability Handbook. @ The information contained herein is presented only as a guide for the applications of our products. No. responsiblity is, assumed by, TOSHIBA CORPORATION for any Infringements of intellectual property Or other rights of the third parties which may result from Its use. ‘No license Is granted By implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others @ The information contained herein is subject to change without notice. 1997-08-30 1/1