2SC5086FT TOSHIBA

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 1

Technical content

TOSHIBA TRANSISTOR SILICON NPN EPITAXIAL PLANAR TYPE VHF~UHF BAND LOW NOISE AMPLIFIER APPLICATIONS Unit in mm e@ Low Noise Figure, High Gain. 3 422006 @ = NF=1.1dB, |Sg1¢/?=11dB (f=1GHz) # 0.8 + 0.05 el g [fed , MAXIMUM RATINGS (Ta = 25°C) ore 4 9 g| CHARACTERISTIC SYMBOL UNIT gisls 1 9, ss Collector-Base Voltage Vcpo | 20 | V_ | 38 Ga Collector-Emitter Voltage VcEO [i | v | © | Emitter-Base Voltage VEBO 2 [Base Current ———SCS~S Yam ° Collector Power Dissipation & 3 Storage Temperature Range —55~125 1. BASE 2. EMITTER MARKING TESM 3. COLLECTOR a Rank JeDEC 3 hrE Rank JEDEC = Ms : O Rank M6 : Y Rank TOSHIBA 2-1B1A 1 2 MICROWAVE CHARACTERISTICS (Ta = 25°C) CHARACTERISTIC SYMBOL TEST CONDITION | aa. | rye. [aax. [unr] Transition Frequency VcE=10V, I¢=20mA [| 5 [ 7| — | GHz] . . [Satel? 1) [Vom=10V, I¢=20mA, f=500MHz| — | 165 | — | Insertion Gain 7 Noise Fi NF(1)_ [Vop=10V, Io=5mA, f=500MHz [| — [| 1|[ — | ose “igure NFQ)_ [VcE=10V, Ic=5mA, f=1GHz | — [| iif 2 | ELECTRICAL CHARACTERISTICS (Ta = 25°C) CHARACTERISTIC SYMBOL TEST CONDITION Collector Cut-off Current ICBO Vcp=10V, Ip=0 |} — | — | 1] vA} Emitter Cut-off Current IgBO VEB=1V, Ic=0 | — | — | 1] 4] DC Current Gain hpg (Note 1) [VoR=10V, Ic =20mA [| so | — | 240] — | Output Capacitance Vcp=10V, In=0, f=1MHz | — | 1.0] — | pF | Reverse Transfer Capacitance (Note 2) — [0.65 [115 | pF | (Note 1) : hyp Classification 0 : 80~160, Y : 120~240 (Note 2) : Cre is measured by 3 terminal method with capacitance bridge. 26100 1EAA2 @ TOSHIBA is continually working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fall due to thei inherent electrical sensitivity and. vulnerability to physical stress. it's the responsibilty of the buyer, when utlizing TOSHIBA products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent products specifications. Also, please keep in mind the precautions and conditions set forth in the TOSHIBA Semiconductor Reliability Handbook @ The information contained herein is presented only as a guide for the applications of our products. No responsibilty is assumed by, TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is subject to change without notice 1998-08-04 1/1