2SB1707TL LITTELFUSE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 3

Technical content

Rev.B 1/2 Low frequency amplifier 2SB1707 zApplication Low frequency amplifier Driver zFeatures 1) A collector current is large. (4A) 2) V CE(sat) ≤ −250mV At IC = −2A / IB = −40mA zExternal dimensions (Unit : mm) Each lead has same dimensions (1) Base (2) Emitter (3) Collector TSMT3 0~0.1 0.16 0.85 1.0MAX 0.7 0.3~0.6(2)(1) (3) 2.9 2.8 1.9 1.6 0.95 0.95 0.4 zAbsolute maximum ratings (Ta=25°C) Parameter Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Limits −15 −12 500 150 −55 to +150 Unit V V V A A mW Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Power dissipation Junction temperature Range of storage temperature ∗Single pulse, PW=1ms zPackaging specifications 2SB1707 TL 3000 Type Package Code Basic ordering unit (pieces) Taping zElectrical characteristics (Ta=25°C) Parameter Symbol Min. Typ. Max. Unit Conditions VCB= −10V, IE=0A, f=1MHz fT − 250 − MHz VCE= −2V, IE=200mA, f=100MHz BVCBO −15 −− V IC= −10µA BVCEO −12 −− V IC= −1mA BVEBO −6 −− V IE= −10µA ICBO −− −100 nA V CB= −15V IEBO −− −100 nA V EB= −6V VCE(sat) −− 150 −250 mV IC= −2A, IB= −40mA hFE 270 − 680 − VCE= −2V, IC= −200mA Cob − 60 − pF Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current gain Transition frequency Collector output capacitance ∗ Pulsed

Rev.B 2/2 zElectrical characteristic curves 0.001 0.01 0.1 1 1 0 COLLECTOR CURRENT : IC (A) 100 1000DC CURRENT GAIN : hFE VCE= −2V Pulsed Ta=25°C Ta= −40°C Ta=125°C Fig.1 DC Current Gain vs. Collector Current 0.001 0.01 0.1 0.001 0.01 0.1 1 10 IC/IB=20/1 Pulsed COLLECTOR CURRENT : IC (A) COLLECTOR SATURATION VOLTAGE : VCE (sat) (V) Ta=25°C Ta= −40°C Ta=125°C Fig.2 Collector-Emitter Saturation Voltage vs. Collector Current 0.01 0.1 0.001 0.01 0.1 1 1 0 COLLECTOR CURRENT : IC (A) BASE SATURATION VOLTAGE : VBE (sat) (V) IC/IB=20/1 Pulsed Ta=25°C Ta=125°C Ta= −40°C Fig.3 Base-emitter saturation voltage vs. Collector Current 0.1 1 10 BASE TO EMITTER CURRENT : VBE (V) 0.001 0.01 0.1 COLLECTOR CURRENT : IC (A) Fig.4 Grounded Emitter Propagation Characteristics VCE= −2V Pulsed Ta=25°C Ta= −40°C Ta=125°C 0.001 0.01 0.1 1 10 100 100 1000 f=1MHz IC=0A Ta=25°C COLLECTOR OUTPUT CAPACITANCE : Cob (pF) EMITTER INPUT CAPACITANCE : Cib (pF) Cib Cob EMITTER TO BASE VOLTAGE : VEB(V) COLLECTOR TO BASE VOLTAGE : VCB(V) Fig.5 Collector Output Capacitance vs. Collector-Base Voltage Emitter Input Capacitance vs. Emitter-Base Voltage 0.01 0.1 1 10 EMITTER CURRENT : IE (A) 100 1000TRANSITION FREQUENCY : fT (MHz) Ta=25°C VCE= −2V f=100MHz Fig.6 Gain Bandwidth Product vs. Emitter Current 0.01 0.1 1 10 COLLECTOR CURRENT : IC (A) 100 1000 10000 Ta=25°C VCE= −5V IC/IB=20/1 Pulsed SWITCHING TIME : (ns) Tstg Tdon Tr Tf Fig.7 Switching Time

Appendix1-Rev1.1 The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.