2SB1457_06 TOSHIBA

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 5

Technical content

TOSHIBA Transistor Silicon PNP Epitaxial Type (Darlington) 2SB1457 Micro Motor Drive, Hammer Drive Applications Power Switching Applications Power Amplifier Applications

  • High DC current gain: h FE = 2000 (min) (VCE = −2 V, IC = −1 A)
  • Low saturation voltage: VCE (sat) = −1.5 V (max) (IC = −1 A, IB = −1 mA) Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Collector-base voltage VCBO −100 V Collector-emitter voltage VCEO −100 V Emitter-base voltage VEBO −8 V Collector current IC (DC) −2 A Collector current IC (Pulse) −3 A Base current IB −0.5 A Collector power dissipation PC 900 mW Junction temperature Tj 150 °C Storage temperature range Tstg −55 to 150 °C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Equivalent Circuit Unit: mm JEDEC TO-92MOD JEITA ― TOSHIBA 2-5J1A Weight: 0.36 g (typ.) BASE EMITTER ≈ 4 kΩ ≈ 800 Ω COLLECTOR

Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO V CB = −80 V, IE = 0 ― ― −10 μA Emitter cut-off current IEBO V EB = −8 V, IC = 0 ― ― −4 mA Collector-emitter breakdown voltage V (BR) CEO IC = −10 mA, IB =0 −100 ― ― V DC current gain hFE V CE = −2 V, IC = −1 A (pulse) 2000 ― ― Collector-emitter saturation voltage V CE (sat) IC = −1 A, IB = −1 mA (pulse) ― ― −1.5 V Base-emitter saturation voltage V BE (sat) I C = −1 A, IB = −1 mA (pulse) ― ― −2.0 V Transition frequency fT V CE = −2 V, IC = −0.5 A ― 50 ― MHz Collector output capacitance Cob V CB = −10 V, IE = 0, f = 1 MHz ― 27 ― pF Turn-on time ton ― 0.4 ― Storage time tstg ― 2.0 ― Switching time Fall time t f −IB1 = IB2 = 1 mA, duty cycle ≤ 1% ― 0.4 ― μs Marking IB1 20 μs Input IB2 VCC = −30 V IB2 IB1 Output 30 Ω B1457 Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. Part No. (or abbreviation code)

Collector-emitter voltage V CE (V) IC – VCE Collector current I C (A) hFE – IC DC current gain h FE Collector current I C (A) VCE (sat) – IC Collector-emitter saturation voltage VCE (sat) (V) Base-emitter saturation voltage VBE (sat) (V) Base-emitter voltage V BE (V) IC – VBE Collector current I C (A) VBE (sat) – IC Collector current I C (A) Ambient temperature Ta (°C) PC – Ta Collector power dissipation P C (mW) Collector current I C (A) −1 −2 −3 −4 IB = −200 μA −1000 −500 −800 −400 −250 −300 Common emitter Ta = 25°C −4 10000 −0.03 Common emitter VCE = −2 V 100 300 500 1000 3000 5000 −0.1 −0.3 −1 −3 Tc = 100°C 25 −55 −10 −0.5 −0.3 Ta = −55°C 100 −1 −3 −0.5 −5 Common emitter IC/IB = 1000 −0.5 −0.3 Tc = −55°C 100 −1 −3 −0.5 −5 Common emitter IC/IB = 1000 200 600 1000 20 40 80 100 140 160 60 120 400 800 1200 −0.5 −2.5 Common emitter VCE = −2 V Tc = 100°C 25 −55 −0.8 −1.6 −2.4 −1.0 −1.5 −2.0 −3.0

Collector-emitter voltage V CE (V) Safe Operating Area Collector current I C (A) −3 −10 −30 −100 −0.03 −0.5 −0.05 −0.1 −0.3 −0.5 *: Single nonrepetitive pulse Ta = 25°C Curves must be derated linearly with increase in temperature. IC max (pulsed)* VCEO max 1 ms* 10 ms* 100 μs* −1 −5 −50 −300

RESTRICTIONS ON PRODUCT USE 20070701-EN

  • The information contained herein is subject to change without notice.
  • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity an d vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
  • The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
  • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
  • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
  • Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.