2SA2072_09 ROHM
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 4
Technical content
www.rohm.com High voltage discharge, High speed switching, Low Noise (−60V, −3A) 2SA2072 zFeatures zDimensions (Unit : mm) 1) High speed switching. ( tf : Typ. : 20ns at IC = −3A) 2) Low saturation voltage, typically. (Typ. : −200mV at IC = −2.0A, IB = −200mA) 3) Strong discharge power for inductive load and capacitance load. 4) Low Noise. 5) Complements the 2SC5825. zApplications High speed switching, Low noise zStructure PNP silicon epitaxial planar transistor zPackaging specifications Taping 2SA2072 Type TL 2500 Package Basic ordering unit (pieces) Code zAbsolute maximum ratings (Ta=25°C) Parameter V V V A A W W Symbol V CBO VCEO VEBO IC ICP PC tj tstg −60 −60 1.0 10.0 150 −55 to 150 Limits Unit Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Power dissipation Junction temperature Range of storage temperature DC Pulsed ∗1 Pw=100ms ∗2 Ta=25°C ∗3 Tc=25°C Abbreviated symbol : A2072 (1) Base (2) Collector (3) Emitter CPT3 (SC-63) <SOT-428>
www.rohm.com zElectrical characteristics (Ta=25°C) Collector-emitter breakdown voltage Collector-base breakdown voltage Emitter-base breakdown voltage Collector cut-off current Emitter cut-off current Collector-emitter saturation voltage DC current gain Transistor frequency Collector output capacitance Turn-on time Storage time Fall time Parameter Symbol Min. Typ. Max. Unit Condition BVCEO BVCBO BVEBO ICBO IEBO VCE (sat) hFE fT Cob ton tstg tf IC = −1mA IC = −100µA IE = −100µA VCB = −20V VEB = −4V IC = −2A IB = −0.2A VCE = −2V IC = −100mA VCE = −10V IE =100mA f =10MHz VCB = −10V IE =0mA f =1MHz ∗1 Non repetitive pulse ∗2 See switching characteristics measurement circuits −60 −60 120 −200 180 150 −1.0 −1.0 −500 270 V V V µA µA mV MHz pF ns ns ns I C = −3A IB1 = −300mA IB2 =300mA VCC −25V zhFE RANK Q 120−270 zElectrical characteristics curves COLLECTOR CURRENT : IC (mA) 512340 120 160 200 COLLECTOR TO EMITTER VOLTAGE : VCE (V) Fig.1 Typical output characteristics IB=1000µA 0µA 100µA 200µA 300µA 400µA 500µA 600µA 700µA 800µA 900µA 0.01 0.1 COLLECTOR CURRENT : IC(A) BASE TO EMITTER VOLTAGE : VBE (V) Fig.2 Grounded emitter propagation characteristics VCE=2V 125°C −40°C 25°C 0.001 0.01 0.1 1 01 100 1000DC CURRENT GAIN : hFE Ta=25°C COLLECTOR CURRENT : IC (A) Fig.3 DC current gain vs.collector current ( Ι ) VCE=5V VCE=2V VCE=3V 0.001 0.01 0.1 1 01 100 1000DC CURRENT GAIN : hFE Ta=25°C COLLECTOR CURRENT : IC (A) Fig.4 DC current gain vs.collector current ( ΙΙ ) 125°C 25°C −40°C 0.001 0.01 0.1 1 01 0.001 0.01 0.1 COLLECTOR SATURATION VOLTAGE : VCE(sat)(V) Ta=25°C COLLECTOR CURRENT : IC (A) Fig.5 Collector-emitter saturation voltage vs.collector current ( Ι ) Ic/Ib=20/1 Ic/Ib=10/1 0.001 0.01 0.1 1 01 0.01 0.1 COLLECTOR SATURATION VOLTAGE : VCE(sat)(V) IC/Ib=10/1 COLLECTOR CURRENT : IC (A) Fig.6 Collector-emitter saturation voltage vs.collector current ( ΙΙ ) 125°C −40°C 25°C
www.rohm.com 0.001 0.01 0.1 1 01 0.1 BASE EMITTER SATURATION VOLTAGE : VBE(sat)(V) IC/Ib=10/1 COLLECTOR CURRENT : IC (A) Fig.7 Base-emitter saturation voltage vs. collector current 125°C −40°C 25°C 0.001 0.01 0.1 1 01 100 1000TRANSITION FREQUENCY : fT (MHz) Ta=25°C VCE=10V EMITTER CURRENT : IE (A) Fig.8 Transition frequency 0.1 10 10 01 100 1000COLLECTOR OUTPUT CAPACITANCE : Cob (pF) Ta=25°C f=1MHz COLLECTOR TO BASE VOLTAGE : VCB (V) Fig.9 Collector output capacitance 1000SW (ns) 1010.10.01 100 COLLECTOR CURRENT : IC (A) Fig.10 Switching Time tf tstg ton Ta=25°C VCC=25V IC/IB=10/1 zSwitching characteristics measurement circuits PWVIN RL=8.3Ω ICIB1 IB2 PW 50 µs DUTY CYCLE 1% VCC −25V ton tstg tf IC IB2 IB1 10% 90% BASE CURRENT WAVEFORM COLLECTOR CURRENT WAVEFORM
Appendix-Rev4.1 Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office. ROHM Customer Support System THE AMERICAS / EUROPE / ASIA / JAPAN Contact us : webmaster@ rohm.co.jpwww.rohm.com Copyright © 2009 ROHM Co.,Ltd. 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan TEL : +81-75-311-2121 FAX : +81-75-315-0172 Appendix Notes No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM Co.,Ltd. The content specified herein is subject to change for improvement without notice. The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM upon request. Examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when de signing circuits for mass production. Great care was taken in ensuring the accuracy of the information specified in this document. However, should you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no re- sponsibility for such damage. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exer cise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no re- sponsibility whatsoever for any dispute arising from the use of such technical information. The Products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, elec- tronic ap pliances and amusement devices). The Products are not designed to be radiation tolerant. While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or malfunction for a variety of reasons. Please be sure to implement in your equipment using the Products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your use of any Product outside of the prescribed scope or not in accordance with the instruction manual. The Products are not designed or manufactured to be used with any equipment, device or system which re quires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intend- ed to be used for any such special purpose, please contact a ROHM sales representative before purchasing. If you intend to export or ship overseas any Product or technology specified herein that may be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law.