2SA1892_06 TOSHIBA

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 5

Technical content

TOSHIBA Transistor Silicon PNP Epitaxial Type (PCT Process) 2SA1892 Power Amplifier Applications Power Switching Applications

  • Low collector-emitter saturation voltage: V CE (sat) = −0.5 V (max)
  • High collector power dissipation: PC = 1.3 W
  • High-speed switching time: tstg = 1.0 μs (typ.)
  • Complementary to 2SC5029 Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Collector-base voltage VCBO −50 V Collector-emitter voltage VCEO −50 V Emitter-base voltage VEBO −5 V Collector current IC −3 A Base current IB −0.2 A Collector power dissipation PC 1.3 W Junction temperature Tj 150 °C Storage temperature range Tstg −55 to 150 °C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Unit: mm JEDEC ― JEITA ― TOSHIBA 2-8M1A Weight: 0.55 g (typ.)

Electrical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO V CB = −50 V, IE = 0 ― ― −1.0 μA Emitter cut-off current IEBO V EB = −5 V, IC = 0 ― ― −1.0 μA Collector-emitter breakdown voltage V (BR) CEO IC = −10 mA, IB = 0 −50 ― ― V hFE (1) (Note) VCE = −2 V, IC = −0.5 A 70 ― 240 DC current gain hFE (2) V CE = −2 V, IB = −1.5 A 40 ― ― Collector-emitter saturation voltage V CE (sat) IC = −1 A, IB = −0.05 A ― ― −0.5 V Base-emitter saturation voltage V BE (sat) I C = −1 A, IB = −0.05 A ― ― −1.2 V Transition frequency fT V CE = −2 V, IC = −0.5 A ― 100 ― MHz Collector output capacitance Cob V CB = −10 V, IE = 0, f = 1 MHz ― 40 ― pF Turn-on time ton ― 0.1 ― Storage time tstg ― 1.0 ― Switching time Fall time tf −IB1 = IB2 = 0.05 A, duty cycle ≤ 1% ― 0.1 ― μs Note: h FE (1) classification O: 70 to 140, Y: 120 to 240 Marking IB1 20 μs VCC = −30 V Output 30 Ω IB1 IB2InputIB2 A1892 Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. Characteristics indicator Part No. (or abbreviation code)

Collector current I C (A) VCE – IC Collector current I C (A) hFE – IC DC current gain h FE Collector current I C (A) VCE – IC Collector-emitter voltage V CE (V) Collector current I C (A) VCE – IC Collector-emitter voltage V CE (V) Collector current I C (A) VCE (sat) – IC Collector-emitter saturation voltage VCE (sat) (V) Collector-emitter voltage V CE (V) Collector current I C (A) VBE (sat) – IC Base-emitter saturation voltage VBE (sat) (V) −1.0 −0.8 −0.6 −0.4 −0.2 IB = −5 mA −40 −20 −30 −120 −2.8 −60 −80 −160 −180 −200 Common emitter Ta = 100°C −0.8 −0.6 −0.4 −0.2 IB = −10 mA −40 −20 −30 −60 −80 −120 Common emitter Ta = −55°C −2.8 −1.0 −160 −200 −0.005 1000 Ta = 100°C −0.01 −0.1 −0.3 −1 100 300 Common emitter VCE = −2 V −55 −0.03 −3 500 −1.0 −0.8 −0.6 −0.4 −0.2 IB = −5 mA −10 −20 −40 −80 −120 −200 Common emitter Ta = 25°C −2.8 −160 −0.1 −0.005 −10 Ta = −55°C −0.01 −0.1 −0.3 −1 −0.3 −0.5 Common emitter IC/IB = 20 100 −0.03 −3 −0.01 −0.005 Ta = 100°C −0.01 −0.1 −0.3 −1 −0.03 −0.05 −0.1 −0.3 Common emitter IC/IB = 20 −55 −0.03 −3 −0.5

Collector-emitter voltage V CE ( V ) Safe Operating Area Collector current I C (A) Ambient temperature Ta (°C) PC – Ta Collector power dissipation P C ( W ) Base-emitter voltage V BE (V) IC – VBE Collector current I C (A) −2.0 −0.5 −1.0 −1.5 Common emitter VCE = −2 V Ta = 100°C −55 −10 −0.02 −0.3 −0.03 −0.05 −0.1 *: Single nonrepetitive pulse Ta = 25°C Curves must be derated linearly with increase in temperature IC max (continuous) IC max (pulsed)* VCEO max 1 ms* 10 ms* 100 ms* DC operation Ta = 25°C −0.3 −0.5 0.2 0.6 0.8 1.2 1.4 1.6 25 50 75 100 125 150 175 1.0 0.4 Pulse width t w ( s ) rth – tw Transient thermal resistance rth ( ° C / W ) 0.001 1000 0.01 0.1 100 10 1 300 100 Curves should be applied in thermal limited area. (Single nonrepetitive pulse) Ta = 25°C

RESTRICTIONS ON PRODUCT USE 20070701-EN

  • The information contained herein is subject to change without notice.
  • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity a nd vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA produc ts, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIB A products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconduct or Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.
  • The TOSHIBA products listed in this document are in tended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage incl ude atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, et c.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.
  • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.
  • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringement s of patents or other rights of the third parties which may result from its use. No license is granted by implic ation or otherwise under any patents or other rights of TOSHIBA or the third parties.
  • Please contact your sales representative for product- by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.