2SA1802 TOSHIBA
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 1
Technical content
TOSHIBA TRANSISTOR SILICON PNP EPITAXIAL TYPE STROBE FLASH APPLICATIONS Unit in mm MEDIUM POWER AMPLIFIER APPLICATIONS a samax, 3 © Excellent hyg Linearity [pzsoq|_ 2.5 Max, : hp (2) = 140 (Min.) (Veg = -2V, Ig = -3 A) | | S La ws @ Low Collector Saturation Voltage a 8 TOO 2 : VCE (sat) = —0.5 V (Max.) (Ig = —3 A, Ip = —60 mA) S25MeN H o.smax e@ Surface Mount Package : Lead Bending Type 2-7B2A 23 4 Le q i © Complementary to 28C4681 Gea 3 MAXIMUM RATINGS (Ta = 25°C) ® " somax, 3 CHARACTERISTIC SYMBOL | RATING | UNIT p2teal SI Sd Collector-Base Voltage VcCBO 3 3 Collector-Emitter Voltage v o.95max. 4 VcEO oesors o.swak Emitter-Base Voltage Vepo | -6 | V_ | 23. | ba x Colles Current | Pulsed (Note [Top |=6 | _* Pe 2] 2 Coltector Collector Power Ta = 25°C] | w ot” (HEAT SINK) Dissipation Te = 25°C c 3_EMITTER ; JEDEC = Junction Temperature Storage Temperature Range =55~150 (Note 1): Pulse Test : Pulse Width = 10 ms (Max.) Duty Cycle = 30% (Max.) ELECTRICAL CHARACTERISTICS (Ta = 25°C) CHARACTERISTIC SYMBOL TEST CONDITION Collector Cut-off Current IcBO Vcp = —30V, Ip =0 | — | — | -100] na | Emitter Cut-off Current | Ippo [Ven =~6V, Io =0 b= [= | =100) aa | Collector-Emitter [bre ay [Von = =2¥, Io = —05A DC Current Gain FE(1) | VCE ic | — | 600) Collector-Emitter - = Saturation Voltage VcK (sat) [Ic = -3 A, Ip = —60mA | - | -0.25]-0.50] V Base-Emitier Voltage Vop= =2V,1g=-3A | — |=086| -12| | Vop = =2V,lo= 058 | — | 180] —_ | Nari | Collector Output Capacitance Vop = =10V, Ip=0,f=iMez| — | 50) — | oF | 261001682 @ TOSHIBA is continually working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices in general can haluncion fal cue, thet ingergrt elec! sensi and wulerabity Yo hyal ses Tes the respons ofthe yer, wen lang TOSHIBA products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product could cause loss Of human fe, bodily injury oF damage to property, In developing your designs, please ‘ensure. thet TOSHIBA, product: are. used within. specified operating ranges as set forth in the most recent products specifications. Also, please keep in mind the precautions and conditions set forth in the TOSHIBA Semiconductor Reliability Handbook. © ‘he information contained herein is presented only as a guide for the applications, of our products. No_ responsibilty is assumed by, TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is, subject to change without notice 1999-06-21 1/1