2N6504 KERSEMI

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 6

Technical content

Silicon Controlled Rectifiers Reverse Blocking Thyristors Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits. Glass Passivated Junctions with Center Gate Fire for Greater Parameter Uniformity and Stability Small, Rugged, Thermowatt Constructed for Low Thermal Resistance, High Heat Dissipation and Durability Blocking V oltage to 800 V olts

300 A Surge Current Capability

Device Marking: Logo, Device Type, e.g., 2N6504, Date Code MAXIMUM RATINGS J = 25°C unless otherwise noted) Rating Symbol Value Unit *Peak Repetitive Off–State Voltage (Note 1.) (Gate Open, Sine Wave 50 to 60 Hz, T J = 25 to 125°C) 2N6504 2N6505 2N6507 2N6508 2N6509 V DRM, V RRM 100 400 600 800 Volts On-State RMS Current (180° Conduction Angles; T C = 85°C) I T(RMS) A Average On-State Current (180° Conduction Angles; T C = 85°C) I T(AV) A Peak Non-repetitive Surge Current (1/2 Cycle, Sine Wave 60 Hz, T J = 100°C) I TSM 250 A Forward Peak Gate Power (Pulse Width ≤ 1.0 µs, T C = 85°C) P GM Watts Forward Average Gate Power (t = 8.3 ms, T C = 85°C) P G(AV) 0.5 Watts Forward Peak Gate Current (Pulse Width ≤ 1.0 µs, T C = 85°C) I GM 2.0 A Operating Junction Temperature Range T J –40 to +125 Storage Temperature Range T stg –40 to +150 *Indicates JEDEC Registered Data 1. V DRM and V RRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. SCRs

25 AMPERES RMS

Preferred devices are recommended choices for future use and best overall value. Device Package Shipping

ORDERING INFORMATION

www.kersemi.com 500/Box 500/Box K G A TO–220AB CASE 221A STYLE 3 PIN ASSIGNMENT Anode Gate Cathode

4 Anode

x = 4, 5, 7, 8 or 9 YY = Year WW = Work Week

www.kersemi.com *THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance, Junction to Case R θJC 1.5 °C/W Maximum Lead Temperature for Soldering Purposes 1/8″ from Case for 10 Seconds T L 260

ELECTRICAL CHARACTERISTICS

C = 25°C unless otherwise noted.) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS *Peak Repetitive Forward or Reverse Blocking Current AK = Rated V DRM or V RRM , Gate Open) T J = 25°C T J = 125°C I DRM , I RRM 2.0 µA mA ON CHARACTERISTICS *Forward On–State Voltage (Note 2.) TM = 50 A) V TM 1.8 Volts *Gate Trigger Current (Continuous dc) T C = 25°C AK = 12 Vdc, R L = 100 Ohms) T C = –40°C I GT 9.0 mA *Gate Trigger Voltage (Continuous dc) AK = 12 Vdc, R L = 100 Ohms, T C = –40°C) V GT 1.0 1.5 Volts Gate Non-Trigger Voltage AK = 12 Vdc, R L = 100 Ohms, T J = 125°C) V GD 0.2 Volts *Holding Current T C = 25°C AK = 12 Vdc, Initiating Current = 200 mA, Gate Open) T C = –40°C I H mA *Turn-On Time TM = 25 A, I GT = 50 mAdc) t gt 1.5 2.0 µs Turn-Off Time (V DRM = rated voltage) TM = 25 A, I R = 25 A) TM = 25 A, I R = 25 A, T J = 125°C) t q µs DYNAMIC CHARACTERISTICS Critical Rate of Rise of Off-State Voltage (Gate Open, Rated V DRM , Exponential Waveform) dv/dt V/µs *Indicates JEDEC Registered Data. 2. Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2%.

Figure 1. Average Current Derating Figure 2. Maximum On–State Power Dissipation

1 CYCLE

Figure 3. Typical On–State Characteristics Figure 4. Maximum Non–Repetitive Surge Current Figure 5. Thermal Response

TO–220AB CASE 221A–07 ISSUE AA STYLE 3: PIN 1. CATHODE 2. ANODE 3. GATE 4. ANODE NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.570 0.620 14.48 15.75 B 0.380 0.405 9.66 10.28 C 0.160 0.190 4.07 4.82 D 0.025 0.035 0.64 0.88 F 0.142 0.147 3.61 3.73 G 0.095 0.105 2.42 2.66 H 0.110 0.155 2.80 3.93 J 0.014 0.022 0.36 0.55 K 0.500 0.562 12.70 14.27 L 0.045 0.060 1.15 1.52 N 0.190 0.210 4.83 5.33 Q 0.100 0.120 2.54 3.04 R 0.080 0.110 2.04 2.79 S 0.045 0.055 1.15 1.39 T 0.235 0.255 5.97 6.47 U 0.000 0.050 0.00 1.27 A K L V G D N Z H Q FB 123 –T– SEATING PLANE S R J U T C www.kersemi.com