2N6071 MOTOROLA

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 6

Technical content

1Motorola Thyristor Device Data /C0083/C0101/C0110/C0115/C0105/C0116/C0105/C0118/C0101 /C0071/C0097/C0116/C0101 /C0084/C0114/C0105/C0097/C0099/C0115 Silicon Bidirectional Thyristors . . . designed primarily for full-wave ac control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon gate controlled solid-state devices are needed. Triac type thyristors switch from a blocking to a conducting state for either polarity of applied anode voltage with positive or negative gate triggering.

  • Sensitive Gate Triggering Uniquely Compatible for Direct Coupling to TTL, HTL, CMOS and Operational Amplifier Integrated Circuit Logic Functions
  • Gate Triggering 4 Mode — 2N6071A,B, 2N6073A,B, 2N6075A,B
  • Blocking Voltages to 600 Volts
  • All Diffused and Glass Passivated Junctions for Greater Parameter Uniformity and Stability
  • Small, Rugged, Thermopad Construction for Low Thermal Resistance, High Heat Dissipation and Durability MAXIMUM RATINGS (TJ = 25°C unless otherwise noted.) Rating Symbol Value Unit *Peak Repetitive Off-State Voltage(1) (Gate Open, TJ = 25 to 110°C) 2N6071A,B 2N6073A,B 2N6075A,B VDRM 200 400 600 Volts *On-State Current RMS (TC = 85°C) IT(RMS) 4 Amps *Peak Surge Current (One Full cycle, 60 Hz, TJ = –40 to +110°C) ITSM 30 Amps Circuit Fusing Considerations (t = 8.3 ms) I2t 3.7 A2s *Peak Gate Power PGM 10 Watts *Average Gate Power PG(AV) 0.5 Watt *Peak Gate Voltage VGM 5 Volts *Indicates JEDEC Registered Data. 1. VDRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. Preferred devices are Motorola recommended choices for future use and best overall value. Order this document by 2N6071/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA  Motorola, Inc. 1998 /C0050/C0078/C0054/C0048/C0055/C0049/C0065/C0044/C0066 /C0050/C0078/C0054/C0048/C0055/C0051/C0065/C0044/C0066 /C0050/C0078/C0054/C0048/C0055/C0053/C0065/C0044/C0066 CASE 77-08 (TO-225AA) STYLE 5 TRIACs

4 AMPERES RMS

*Motorola preferred devices MT1 GMT2 MT1MT2 G MT2 /C0042 /C0042 /C0042 REV 1

/C0050/C0078/C0054/C0048/C0055/C0049/C0065/C0044/C0066 /C0050/C0078/C0054/C0048/C0055/C0051/C0065/C0044/C0066 /C0050/C0078/C0054/C0048/C0055/C0053/C0065/C0044/C0066

2 Motorola Thyristor Device Data

*Operating Junction Temperature Range TJ –40 to +110 °C *Storage Temperature Range Tstg –40 to +150 °C Mounting Torque (6-32 Screw)(1) — 8 in. lb. *Indicates JEDEC Registered Data. 1. Torque rating applies with use of compression washer (B52200F006). Mounting torque in excess of 6 in. lb. does not appreciably lower case-to-sink thermal resistance. Main terminal 2 and heatsink contact pad are common. For soldering purposes (either terminal connection or device mounting), soldering temperatures shall not exceed +200°C, for 10 seconds. Consult factory for lead bending options. THERMAL CHARACTERISTICS Characteristic Symbol Max Unit *Thermal Resistance, Junction to Case R θJC 3.5 °C/W Thermal Resistance, Junction to Ambient R θJA 75 °C/W *Indicates JEDEC Registered Data. ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted.) Characteristic Symbol Min Typ Max Unit *Peak Blocking Current (VD = Rated VDRM , gate open, TJ = 25°C) (TJ = 110°C) IDRM µA mA *On-State Voltage (Either Direction) (ITM = 6 A Peak) VTM — — 2 Volts *Peak Gate Trigger Voltage (Continuous dc) (Main Terminal Voltage = 12 Vdc, RL = 100 Ohms, TJ = –40°C) MT2(+), G(+); MT2(–), G(–) All Types (Main Terminal Voltage = Rated VDRM , RL = 10 k ohms, TJ = 110°C) MT2(+), G(+); MT2(–), G(–) All Types VGT 0.2 0.2 1.4 1.4 2.5 2.5 Volts *Holding Current (Either Direction) (Main Terminal Voltage = 12 Vdc, Gate Open, TJ = –40°C) (Initiating Current = 1 Adc) 2N6071A,B, 2N6073A,B, 2N6075A,B (TJ = 25°C) 2N6071A,B, 2N6073A,B, 2N6075A,B IH mA Turn-On Time (Either Direction) (ITM = 14 Adc, IGT = 100 mAdc) ton — 1.5 — µs Blocking Voltage Application Rate at Commutation @ V DRM , TJ = 85°C, Gate Open, ITM = 5.7 A, Commutating di/dt = 2.0 A/ms dv/dt(c) — 5 — V/µs *Indicates JEDEC Registered Data.

/C0050/C0078/C0054/C0048/C0055/C0049/C0065/C0044/C0066 /C0050/C0078/C0054/C0048/C0055/C0051/C0065/C0044/C0066 /C0050/C0078/C0054/C0048/C0055/C0053/C0065/C0044/C0066 3Motorola Thyristor Device Data QUADRANT (See Definition Below) Type IGT @ TJ I mA II mA III mA IV mA Gate Trigger Current (Continuous dc) (Main Terminal Voltage = 12 Vdc RL = 100 ohms) 2N6071A 2N6073A +25°C 5 5 5 10 (Main Terminal Voltage = 12 Vdc, R L = 100 ohms ) Maximum Value 2N6073A 2N6075A –40°C 20 20 20 30 2N6071B 2N6073B +25°C 3 3 3 5 2N6073B 2N6075B –40°C 15 15 15 20 *Indicates JEDEC Registered Data. SENSITIVE GATE LOGIC REFERENCE IC Logic Firing QuadrantIC Logic Functions I II III IV TTL 2N6071A Series 2N6071A Series HTL 2N6071A Series 2N6071A Series CMOS (NAND) 2N6071B Series 2N6071B Series CMOS (Buffer) 2N6071B Series 2N6071B Series Operational Amplifier 2N6071A Series 2N6071A Series Zero Voltage Switch 2N6071A Series 2N6071A Series Trigger devices are recommended for gating on Triacs. They provide: 1. Consistent predictable turn-on points. 2. Simplified circuitry. 3. Fast turn-on time for cooler, more efficient and reliable operation. QUADRANT DEFINITIONS QUADRANT II QUADRANT I QUADRANT III QUADRANT IV MT2(+) MT2(–) G(–) G(+) SAMPLE APPLICATION: TTL-SENSITIVE GATE 4 AMPERE TRIAC TRIGGERS IN MODES II AND III 0 V –VEE VEE = 5.0 V MC7400 510 Ω 2N6071A LOAD4

115 VAC

/C0050/C0078/C0054/C0048/C0055/C0049/C0065/C0044/C0066 /C0050/C0078/C0054/C0048/C0055/C0051/C0065/C0044/C0066 /C0050/C0078/C0054/C0048/C0055/C0053/C0065/C0044/C0066

4 Motorola Thyristor Device Data

IT(AV), AVERAGE ON-STATE CURRENT (AMP) 140120100806040200–20–40–60 0.3 0.5 0.7 1.0 2.0 2.0 3.0 0.5 0.3 0.7 1.0 120 3.0 –60 –40 –20 0 20 40 60 80 100 140 OFF-STATE VOLTAGE = 12 Vdc ALL MODES OFF-STATE VOLTAGE = 12 Vdc ALL MODES TJ, JUNCTION TEMPERATURE ( °C)TJ, JUNCTION TEMPERATURE ( °C) 120° 90° 30° dc 2.0 4.0 8.0 6.0 4.03.02.01.0 IT(RMS) , RMS ON-STATE CURRENT (AMP) 3.0 0 2.0 4.0 6.0 0 1.0 2.0 8.0 4.0 α = 30° 60° 90° 120° 180° dc IT(AV), AVERAGE ON-STATE CURRENT (AMP) 3.0 100 0 1.0 2.0 110 4.0 60° 120° dc α = CONDUCTION ANGLE α α α α = CONDUCTION ANGLE α 3.0 100 0 1.0 2.0 α α 110 120° 180° dc 90° α = 30° α α α = CONDUCTION ANGLE 4.0 IT(RMS) , RMS ON-STATE CURRENT (AMP) 180° α = 30° 90° α = CONDUCTION ANGLE 60° 60° T , CASE TEMPERATURE ( C)C ° T , CASE TEMPERATURE ( C)C ° P , AVERAGE POWER (WATTS)(AV)V , GATE TRIGGER VOLTAGE (NORMALIZED)GTM P , AVERAGE POWER (WATTS)(AV)I , GATE TRIGGER CURRENT (NORMALIZED)GTM FIGURE 1 – AVERAGE CURRENT DERATING FIGURE 2 – RMS CURRENT DERATING FIGURE 3 – POWER DISSIPATION FIGURE 5 – TYPICAL GATE-TRIGGER VOLTAGE FIGURE 4 – POWER DISSIPATION FIGURE 6 – TYPICAL GATE-TRIGGER CURRENT α = 180°

/C0050/C0078/C0054/C0048/C0055/C0049/C0065/C0044/C0066 /C0050/C0078/C0054/C0048/C0055/C0051/C0065/C0044/C0066 /C0050/C0078/C0054/C0048/C0055/C0053/C0065/C0044/C0066

6 Motorola Thyristor Device Data

STYLE 5: PIN 1. MT 1 2. MT 2 3. GATE CASE 77–09 (TO–225AA) ISSUE W NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. –B– –A– M K F C Q H V G S D J R U 13 2 2 PL MAM0.25 (0.010) B M MAM0.25 (0.010) B M DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.425 0.435 10.80 11.04 B 0.295 0.305 7.50 7.74 C 0.095 0.105 2.42 2.66 D 0.020 0.026 0.51 0.66 F 0.115 0.130 2.93 3.30 G 0.094 BSC 2.39 BSC H 0.050 0.095 1.27 2.41 J 0.015 0.025 0.39 0.63 K 0.575 0.655 14.61 16.63 M 5 TYP 5 TYP Q 0.148 0.158 3.76 4.01 R 0.045 0.065 1.15 1.65 S 0.025 0.035 0.64 0.88 U 0.145 0.155 3.69 3.93 /C0095/C0095 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.; SPD, Strategic Planning Office, 141, P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447 4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan. 81–3–5487–8488 Customer Focus Center: 1–800–521–6274 Motorola Fax Back System – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 – http://sps.motorola.com/mfax/ HOME PAGE : http://motorola.com/sps/ 2N6071/D◊