Download PDF2N5484 CALOGIC
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 2
Technical content
2N5484 – 2N5486
FEATURES
- • Up to 400MHz Operation
- • Economy Packaging
- • C rss <1.0pF ABSOLUTE MAXIMUM RATINGS (TA = 25oC unless otherwise specified) oC to +150oC NOTE: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ORDERING INFORMATION
Part Package Temperature Range 2N5484-86 Plastic TO-92 -55 oC to +135oC X2N5484-86 Sorted chips in Carriers -55oC to +135oC CORPORATION PIN CONFIGURATION TO-92 S GD ELECTRICAL CHARACTERISTICS (TA = 25oC unless otherwise specified) SYMBOL PARAMETER 2N5484 2N5485 2N5486 UNITS TEST CONDITIONS MIN MAX MIN MAX MIN MAX IGSS Gate Reverse Current -1.0 -1.0 -1.0 nA VGS = -20V, VDS = 0 -200 -200 -200 T A = 100oC BV GSS Gate-Source Breakdown Voltage -25 -25 -25 V IG = -1µA, VDS = 0 IDSS Saturation Drain Current 1.0 5.0 4.0 10 8.0 20 mA V DS = 15V, VGS = 0 (Note 1) gfs Common-Source Forward Transconductance 3000 6000 3500 7000 4000 8000 µS VDS = 15V, VGS = 0 f = 1kHz gos Common-Source Output Conductance 50 60 75 Re (yfs) Common-Source Forward Transconductance (Note 2) 2500 f = 100MHz 3000 3500 f = 400MHz Re (yos) Common-Source Output Conductance (Note 2) 75 f = 100MHz 100 100 f = 400MHz Re (yis) Common-Source Input Conductance (Note 2) 100 f = 100MHz 1000 1000 f = 400MHz C iss Common-Source Input Capacitance (Note 2) 5.0 5.0 5.0 pF f = 1MHzC rss Common-Source Reverse Transfer Capacitance (Note 2) 1.0 1.0 1.0 C oss Common-Source Output Capacitance (Note 2) 2.0 2.0 2.0 5000
2N5484 – 2N5486 CORPORATION ELECTRICAL CHARACTERISTICS (Continued) (TA = 25oC unless otherwise specified) SYMBOL PARAMETER 2N5484 2N5485 2N5486 UNITS TEST CONDITIONS MIN MAX MIN MAX MIN MAX NF Noise Figure (Note 2) 2.5 2.5 2.5 dB VDS = 15V, VGS = 0, R G = 1MΩ f = 1kHz
3.0 VDS = 15V, VD = 1mA,
R G = 1kΩ f = 100MHz 2.0 2.0 VDS = 15V, ID = 4mA, R G = 1kΩ4.0 4.0 f = 400MHz G ps Common-Source Power Gain (Note 2) 16 25 V DS = 15V, ID = 1mA f = 100MHz 18 30 18 30 VDS = 15V, ID = 4mA 10 20 10 20 f = 400MHz NOTES: 1. Pulse test required. Pulse width = 300µs, duty cycle ≤ 3%. 2.For design reference only, not 100% tested.