2N4999 NJSEMI
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 1
Technical content
New Sarsey Semt-Conductor Products, Ine. 20 STERN AVE. TELEPHONE: (973) 376-2922 SPRINGFIELD, NEW JERSEY 07081 (212) 227-6008 USA FAX: (978) 376-8060 © DISCRETE EMITTER GEOMETRY WITH INTEGRATED FEEDBACK RESISTORS ( (é Te ABSOLUTE MAXIMUM RATINGS (Note 1) wa eT oe? op b= io Maximum Temperatures mS — Storage Temperature 65°C to +200°C scans 88 on —! Pal Operating Junction Temperature 65°C to +200°C 80 ah 28 Lead Temperature (Soldering, 60 second time limit) +300°C v ye | Maximum Power Dissipation [in =e Total Dissipation at 50°C Case Temperature, Vog = —40 V 30 Watts ‘t Ee as (See Maximum Permissible Power Curve and Note 4) atiorconn Lay |] Maximum Voltages and Current . Vers Collector to Emitter Voltage —100 Volts Vero Collector to Emitter Voltage (Note 2) . —80 Volts An timsensions in inches Veso Emitter to Base Voltage —5.5 Volts AMI ents electrically slated from case Ie Collector Current 2.0 Amps —ewW ELECTRICAL CHARACTERISTICS (25°C Case Temperature unless otherwise noted) SYMBOL CHARACTERISTICS MIN. TYP. MAX. UNITS TEST CONDITIONS Veeotsu) Collector to Emitter Sustaining Voltage (Notes 2 and 3) —80 Volts 1, =100mA 1,=0 BY ces Collector to Emitter Breakdown Voltage —100 Volts i. =1.0mA Vp = 0 BYing Emitter to Base Breakdown Voltage -55 Volts |. =0 1, = 1.0mA Nee DC Pulse Current Gain (Note 3) 2 39 Io =50mA Veg = —5.0V hee DC Pulse Current Gain (Note 3) 30 4090 Io= LOA ” Veg = —5.0V hee(—55°C) DC Pulse Current Gain (Note 3) . 1528 Ie=10A Vg =—5.0V hee DC Pulse Current Gain (Note 3) 15 28 Io=20A Veg = —5.0V hy High Frequency Current Gain (f = 20 MHz) 25 48 Ig=02A Voge =—5.0V Vetiut) Pulsed Collector Saturation Voltage (Note 3) 0.73 0.85 Volts 1p =20A y= 0.2A Yeetsany Pulsed Base Saturation Voltage (Note 3) 0.96 —1.2 Volts Ic =1.0A y=O.1A Veeisat Pulsed Base Saturation Voltage (Note 3) 1.28 -15 Vols 1¢=20A 1,=0.2A Vge(on) Pulsed Base Emitter “ON" Voltage (Note 3) —15 Volts 1¢=20A = Vog = —5.0V lees Collector Cutoff Current 002 1.0 pA Veg = —60V Vyp =0 eso Emitter Cutoff Current: 10 yA Ig = Veg =—4.0V Icex(150°C) Collector Reverse Current 500 WA Veg = —60V Vig = —2.0V Co Collector to Base Capacitance 46 120 pF i=0 Vcg = —10V notes: (1) These ratings are limiting values above which the serviceability of any individval semiconductor device may be impaired. (2) This rating relers tos high curcent point where collector to emitter voltage is lowest. (3) Pulse Conditions: length = 300 ys; duty cycle m= 1%. NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without notice Information turished by NJ Semi-Conductors is believed to be both accurate and reliable at the time of going to press. However \\J Semi-Conductors assumes no responsibility for any errors or omissions discuvered in its use NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders: