2N4401BU FAIRCHILD

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 7

Technical content

NPN General Pupose Amplifier This device is designed for use as a medium power amplifier and switch requiring collector currents up to 500 mA. MMBT44012N4401 Absolute Maximum Ratings* TA = 25°C unless otherwise noted *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Symbol Parameter Value Units VCEO Collector-Emitter Voltage 40 V VCBO Collector-Base Voltage 60 V VEBO Emitter-Base Voltage 6.0 V IC Collector Current - Continuous 600 mA TJ, Tstg Operating and Storage Junction Temperature Range -55 to +150 °C Thermal Characteristics TA = 25°C unless otherwise noted Symbol Characteristic Max Units 2N4401 *MMBT4401 PD Total Device Dissipation Derate above 25°C 625 5.0 350 2.8 mW mW/°C RθJC Thermal Resistance, Junction to Case 83.3 °C/W RθJA Thermal Resistance, Junction to Ambient 200 357 °C/W C B E TO-92 C B E SOT-23 Mark: 2X *Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06."  2001 Fairchild Semiconductor Corporatio n 2N4401 / MMBT4401 2N4401/MMBT4401, Rev A

Electrical Characteristics TA = 25°C unless otherwise noted OFF CHARACTERISTICS V(BR)CEO Collector-Emitter Breakdown Voltage* I C = 1.0 mA, IB = 0 40 V V(BR)CBO Collector-Base Breakdown Voltage I C = 0.1 mA, IE = 0 60 V V(BR)EBO Emitter-Base Breakdown Voltage I E = 0.1 mA, IC = 0 6.0 V IBL Base Cutoff Current V CE = 35 V, VEB = 0.4 V 0.1 µA ICEX Collector Cutoff Current V CE = 35 V, VEB = 0.4 V 0.1 µA ON CHARACTERISTICS* hFE DC Current Gain I C = 0.1 mA, VCE = 1.0 V IC = 1.0 mA, VCE = 1.0 V IC = 10 mA, VCE = 1.0 V IC = 150 mA, VCE = 1.0 V IC = 500 mA, VCE = 2.0 V 100 300 VCE(sat) Collector-Emitter Saturation Voltage I C = 150 mA, IB = 15 mA IC = 500 mA, IB = 50 mA 0.4 0.75 V V VBE(sat) Base-Emitter Saturation Voltage I C = 150 mA, IB = 15 mA IC = 500 mA, IB = 50 mA 0.75 0.95 1.2 V V SMALL SIGNAL CHARACTERISTICS fT Current Gain - Bandwidth Product I C = 20 mA, VCE = 10 V, f = 100 MHz

250 MHz

Ccb Collector-Base Capacitance V CB = 5.0 V, IE = 0, f = 140 kHz 6.5 pF Ceb Emitter-Base Capacitance V BE = 0.5 V, IC = 0, f = 140 kHz 30 pF hie Input Impedance I C = 1.0 mA, VCE = 10 V, f = 1.0 kHz 1.0 15 kΩ hre Voltage Feedback Ratio I C = 1.0 mA, VCE = 10 V, f = 1.0 kHz 0.1 8.0 x 10-4 hfe Small-Signal Current Gain I C = 1.0 mA, VCE = 10 V, f = 1.0 kHz 40 500 hoe Output Admittance I C = 1.0 mA, VCE = 10 V, f = 1.0 kHz 1.0 30 µmhos SWITCHING CHARACTERISTICS td Delay Time VCC = 30 V, VEB = 2 V, 15 ns tr Rise Time I C = 150 mA, IB1 = 15 mA 20 ns ts Storage Time V CC = 30 V, IC = 150 mA 225 ns tf Fall Time I B1 = IB2 = 15 mA 30 ns *Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0% Symbol Parameter Test Conditions Min Max Units NPN General Purpose Amplifier (continued)

Typical Pulsed Current Gain vs Collector Current 0.1 0.3 1 3 10 30 100 300 100 200 300 400 500 I - COLLECTOR CURRENT (mA) h - TYPICAL PULSED CURRENT GAIN C FE 125 °C 25 °C - 40 °C V = 5VCE Collector-Emitter Saturation Voltage vs Collector Current 11 0 1 0 0 5 0 0 0.1 0.2 0.3 0.4 I - COLLECTOR CURRENT (mA) V - COLLECTOR-EMITTER VOLTAGE (V) CE SAT 25 °C C β = 10 125 °C - 40 °C Base-Emitter Saturation Voltage vs Collector Current 1 10 100 500 0.4 0.6 0.8 I - COLLECTOR CURRENT (mA) V - BASE-EMITTER VOLTAGE (V) BE SAT C β = 10 25 °C 125 °C - 40 °C Base-Emitter ON Voltage vs Collector Current 0.1 1 10 25 0.2 0.4 0.6 0.8 I - COLLECTOR CURRENT (mA) V - BASE-EMITTER ON VOLTAGE (V) BE (ON) C V = 5VCE 25 °C 125 °C - 40 °C Collector-Cutoff Current vs Ambient Temperature 25 50 75 100 125 150 0.1 100 500 T - AMBIENT TEMPERATURE ( C) I - COLLECTOR CURRENT (nA) A V = 40VCB CBO Emitter Transition and Output Capacitance vs Reverse Bias Voltage 0.1 1 10 100 REVERSE BIAS VOLTAGE (V) CAPACITANCE (pF) f = 1 MHz C ob C NPN General Purpose Amplifier te (continued) 2N4401 / MMBT4401

Typical Characteristics (continued) Power Dissipation vs Ambient Temperature 0 25 50 75 100 125 150 0.25 0.5 0.75 TEMPERATURE ( C) P - POWER DISSIPATION (W) D o SOT-223 TO-92 SOT-23 Turn On and Turn Off Times vs Collector Current 10 100 1000 160 240 320 400 I - COLLECTOR CURRENT (mA) TIME (nS) I = I = ton t off C Ic V = 25 Vcc Switching Times vs Collector Current 10 100 1000 160 240 320 400 I - COLLECTOR CURRENT (mA) TIME (nS) I = I = tr t s C Ic V = 25 Vcc tf td NPN General Purpose Amplifier (continued) 2N4401 / MMBT4401

Typical Common Emitter Characteristics (f = 1.0kHz) Common Emitter Characteristics 0 1 02 03 04 05 06 0 I - COLLECTOR CURRENT (mA) CHAR. RELATIVE TO VALUES AT I = 10mA V = 10 VCE C C T = 25 CA o hoe hre hfe hie Common Emitter Characteristics 0 2 04 06 08 0 1 0 0 0.4 0.8 1.2 1.6 2.4 T - AMBIENT TEMPERATURE ( C) CHAR. RELATIVE TO VALUES AT T = 25 C V = 10 VCE A A I = 10 mAC hoe hre hfe hie o o Common Emitter Characteristics 0 5 10 15 20 25 30 35 0.75 0.8 0.85 0.9 0.95 1.05 1.1 1.15 1.2 1.25 1.3 V - COLLECTOR VOLTAGE (V) CHAR. RELATIVE TO VALUES AT V = 10V CE CE T = 25 CA o hoe hre hfe hie I = 10 mAC NPN General Purpose Amplifier (continued) 2N4401 / MMBT4401

1.0 KΩ ΩΩ ΩΩ

500 Ω ΩΩ ΩΩ 200 Ω ΩΩ ΩΩ 50 Ω ΩΩ ΩΩ 37 Ω ΩΩ ΩΩ - 1.5 V 6.0 V 30 V FIGURE 1: Saturated Turn-On Switching Timer NOTE: BV = 5.0 V FIGURE 2: Saturated Turn-Off Switching Time EBO NPN General Purpose Amplifier (continued) 2N4401 / MMBT4401

The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Preliminary No Identification Needed Obsolete This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Formative or In Design First Production Full Production Not In Production DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY , FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. PowerTrench QFET™ QS™ QT Optoelectronics™ Quiet Series™ SILENT SWITCHER SMART START™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 FASTr™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ MICROWIRE™ OPTOLOGIC™ OPTOPLANAR™ PACMAN™ POP™ Rev. G ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DOME™ E 2CMOSTM EnSignaTM FACT™ FACT Quiet Series™ FAST SyncFET™ TinyLogic™ UHC™ VCX™