2N3904S FS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 8
Technical content
SOT–23 MAXIMUM RATINGS Rating Unit Collector–Emitter Voltage 40 Vdc Collector–Base Voltage 60 Vdc Emitter–Base Voltage 6.0 Vdc Collector Current — Co ntinuous 200 mAdc THERMAL CHARACTERISTICS SymbolCharacteristic Unit Total Device Dissipation FR– 5 Board, (1) 225 TA = 25 C 1.8Derate above 25 C mW/ C Thermal Resistance, Junction to Ambient 556 Total Device Dissipation P D 300 Alumina Substrate, (2) TA = 25 C 4 . 2Derate above 25 C mW/ C Thermal Resistance, Junction to Ambient 417 Junction and Storage Temperature –55 to +150 ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted.) Min OFF CHARACTERISTICS Collector–Emitter Breakdown Voltage(3) (I C = 1.0 mAdc) Collector–Base Breakdown Voltage (I C = 10 µAdc) Emitter–Base Breakdow n V oltage (I E = 10 µAdc) IBL Base Cutoff Current ( V CE= 30 Vdc, V EB = 3.0 Vdc, ) ICEX Collector Cutoff Current ( V CE = 30Vdc, V BE = 3.0Vdc ) 3. Pulse Test: Pulse Width <300 µs, Duty Cycle <2.0%. Device Shipping 2N3904S 3000/T ape & Reel General Purpose Transistor
ORDERING INFORMATION
compliance with RoHS requirements.We declare that the material of product 2007. 12. 18 1/8 SEMICO NDUCTOR TECH NICAL DATA 2N3904S Revision No : 0 1AM Marking Symbol V alue VCEO VCBO VEBO IC Max DP θJAR θJAR , TstgJT mW C/W mW C/W C SymbolCharacteristic UnitMax V(BR)CEO V(BR)CBO V(BR)EBO 6.0 Vdc Vdc Vdc nAdc nAdc
ELECTRICAL CHARACTERISTICS ( TA 25°C unless otherwise noted) Characteristic Symbol Min Max Unit ON CHARACTERISTICS (3) DC Current Gain hFE 100 300 Collector–Emitter Saturation Voltage V CE(sat) 0.2 0.3 Vdc Base–Emitter Saturation Voltage V BE(sat) 0.65 0.85 0.95 Vdc SMALL–SIGNAL CHARACTERISTICS Current–Gain – Bandwidth Product fT 300 – MHz Output Capacitance Cobo – 4.0 pF Input Capacitance Cibo – 8.0 pF 3. Pulse Test: Pulse Width ≤ 300 µs; Duty Cycle ≤ 2.0%. 2007. 12. 18 2/8 2N3904S Revision No : 0 (IC = 1.0 mAdc, VCE = 1.0 Vdc) (IC = 10 mAdc, VCE = 1.0 Vdc) (IC = 50 mAdc, VCE = 1.0 Vdc) (IC = 100 mAdc, VCE = 1.0 Vdc) (IC = 0.1 mAdc, VCE = 1.0 Vdc) (IC = 10 mAdc, IB = 1.0 mAdc) (IC = 50 mAdc, IB = 5.0 mAdc) (IC = 10 mAdc, IB = 1.0 mAdc) (IC = 50 mAdc, IB = 5.0 mAdc) (IC = 10 mAdc, VCE = 20 Vdc, f = 100 MHz) (VCB = 5.0 Vdc, IE = 0, f = 1.0 MHz) (VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz) Input Impedance (VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz) hie 1.0 10 kΩ Voltage Feedback Ratio (VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz) hre 0.5 8.0 X 10-4 Small–Signal Current Gain (VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz) hfe 100 400 – Output Admittance (VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz) hoe 1.0 40 μmhos Noise Figure (VCE = 5.0Vdc, IC = 100 μAdc, RS = 1.0 k Ω, f = 1.0 kHz) NF – 5.0 dB SWITCHING CHARACTERISTICS Delay Time (V CC = 3.0 Vdc, VBE = –0.5 Vdc td – 35 Rise Time IC = 10 mAdc, IB1 = 1.0 mAdc) tr – 35 ns Storage Time (V CC = 3.0 Vdc, IC = 10 mAdc ts – 200 Fall Time IB1 = IB2 = 1.0 mAdc) tf – 50 ns
- 12. 18 7/8 2N3904S Revision No : 0 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M,1982 2. CONTROLLING DIMENSION: INCH. PIN 1 BASE
2 EMITTER
3 COLLECTOR
L A C B S H GV 1 2 INCHES MILLIMETERSDIM A B C D G H J K L S V MIN 0.1102 0.0472 0.0350 0.0150 0.0701 0.0005 0.0034 0.0140 0.0350 0.0830 0.0177 MAX 0.1197 0.0551 0.0440 0.0200 0.0807 0.0040 0.0070 0.0285 0.0401 0.1039 0.0236 MIN 2.80 1.20 0.89 0.37 1.78 0.013 0.085 0.35 0.89 2.10 0.45 MAX 3.04 1.40 1.11 0.50 2.04 0.100 0.177 0.69 1.02 2.64 0.60 mm inches 0.037 0.95 0.079 2.0 0.8 0.95 0.9 0.035 0.037 0.031
Metric Dimensions Govern –– English are in parentheses for reference only EMBOSSED TAPE AND REEL DATA FOR DISCRETES A T Max Outside Dimension Measured at Edge G Inside Dimension Measured Near Hub 20.2mm Min (.795’’) 1.5mm Min (.06’’) 13.0mm ± 0.5mm (.512 ±.002’’) 50mm Min (1.969’’) Full Radius Storage Conditions Temperature: 5 to 40 Deg.C (20 to 30 Deg. C is preferred) Humidity: 30 to 80 RH (40 to 60 is preferred ) Recommended Period: One year after manufacturing (This recommended period is for the soldering condition only. The characteristics and reliabilities of the products are not restricted to this limitation) 2007. 12. 18 2N3904S Revision No : 0 Size A Max G T Max 8 mm 330mm (12.992’’) 8.4mm+1.5mm, -0.0 14.4mm (.56’’)