Download PDF2N3501 SEME-LAB
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 3
Technical content
VCBO Collector – Base Voltage VCEO Collector – Emitter Voltage (IB = 0) VEBO Emitter – Base Voltage (IB = 0) IC Collector Current PD Total Device Dissipation TA = 25 °C PD Derate above 25°C Tstg Storage Temperature R ja Thermal Resistance Junction to Ambient 150V 150V 300mA 5.71mW / °C –65 to 200°C 175°C/W ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) NPN SILICON TRANSISTOR
FEATURES
- NPN High Voltage Planar Transistor Hermetic TO39 Package Full Screening Options Available MECHANICAL DATA Dimensions in mm (inches) TO39 PACKAGE Pin 1 = Emitter Underside View Pin 2 = Base Pin 3 = Collector 0.89 (0.035)max. 12.70 (0.500) min. 0.41 (0.016) 0.53 (0.021) dia. 5.08 (0.200) typ. 0.71 (0.028) 0.86 (0.034) 2.54 (0.100) 45° 6.10 (0.240) 6.60 (0.260) 8.51 (0.34) 9.40 (0.37) 7.75 (0.305) 8.51 (0.335) 0.74 (0.029) 1.14 (0.045) Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Document Number 5974 Issue 1
Parameter Test Conditions Min. Typ. Max. Unit IC = 10mA I B = 0 IC = 10µAI E = 0 IE= 10µAI C = 0 VCB = 75V I E = 0 VCB = 75V I E = 0 TA = 150°C VEB(off)= 4V I C = 0 IC = 0.1mA V CE = 10V IC = 1mA V CE = 10V IC = 10mA V CE = 10V1 IC = 150mA V CE = 10V1 IC = 300mA V CE = 10V1 IC = 10mA I B = 1mA IC = 50mA I B = 5mA IC = 150mA I B = 15mA IC = 10mA I B = 1mA IC = 50mA I B = 5mA IC = 150mA I B = 15mA VCE = 20V I C = 20mA f = 100MHz VCB = 10V I E = 0 f = 1MHz VEB = 0.5V I C = 0 f = 1MHz VCE = 10V I C = 10mA f = 1KHz VCE = 10V I C = 10mA f = 1KHz VCE = 10V I C = 10mA f = 1KHz VCE = 10V I C = 10mA f = 1KHz 150 150 0.05 100 300 0.2 0.25 0.4 0.8 0.9 1.2 150 0.25 1.25 375 200 OFF CHARACTERISTICS ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise stated) ON CHARACTERISTICS SMALL SIGNAL CHARACTERISTICS V µA nA V V MHz pF Ω x10-4 Ω V(BR)CEO Collector-Emitter Breakdown Voltage1 V(BR)CBO Collector-Base Breakdown Voltage V(BR)EBO Emitter-Base Breakdown Voltage ICBO Collector Cutoff Current IEBO Emitter Cutoff Current hFE DC Current Gain VCE(SAT) Collector-Emitter Saturation Voltage1 VBE(SAT) Base-Emitter Saturation Voltage1 fT Current-Gain–Bandwidth Product 2 C obo Output Capacitance C ibo Input Capacitance hie Input Impedance hre Voltage Feedback Ratio hfe Small-Signal Current Gain hoe Output Admittance Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Document Number 5974 Issue 1
Parameter Test Conditions Min. Typ. Max. Unit 2N3501 ELECTRICAL CHARACTERISTICS Continued (TA = 25°C unless otherwise stated) 1) Pulse test : Pulse Width < 300µs ,Duty Cycle < 2% 2) ftis defined as the frequency at which |hfe|.ftest SWITCHING CHARACTERISTICS td Delay Time tr Rise Time ts Storage Time tf Fall Time IC = 150mA I B1 = 15mA VCC = 100V V EB(off)= -2V IC = 150mA I B1 = 15mA VCC = 100V V EB(off)= -2V IC = 150mA V CC = 100V IB1 = IB2 = 15mA IC = 150mA V CC = 100V IB1 = IB2 = 15mA 800 ns ns ns ns Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Document Number 5974 Issue 1