Download PDF2N3439 MULTICOMP
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 2
Technical content
Page <1> V1.016/09/19 Bipolar Transistor Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Description: A Silicon NPN transistor in a TO-39 case intended for high voltage switching and linear amplifier applications Maximum Ratings: Characteristic Symbol Rating Unit Collector-Emitter Voltage VCEO 350 VCollector-Base Voltage VCBO 450 Emitter-Base Voltage VEBO 7 Continuous Collector Current - Base Current lC lB 500 A mA Total Device Dissipation (TA = +25°C), Note 1) Derate Above 25°C = 5.7 PD 5.7 W mW/°CTotal Device Dissipation (TC = +25°C, Note 1), Derate Above 25°C PD 28.6 Operating Junction Temperature Range, TJ -65 to +200 °C Storage Temperature Range Tstg Thermal Resistance, Junction-to-case Rthjc °C/W Thermal Resistance, Junction-to-Ambient 175 Pin Configurations: 1. Emitter 2. Base 3. Collector Collector Base Emitter
Page <2> V1.016/09/19 Bipolar Transistor Newark.com/multicomp-pro Farnell.com/multicomp-pro Element14.com/multicomp-pro Description Part Number Transistor, NPN,1A, 350V, TO-39 2N3439 Part Number Table Parameter Symbol T est Conditions Min. Typ Max. Unit OFF Characteristics Collector-Emitter Sustaining Voltage VCEO(sus) IC = 50mA, IB = 0, Not 1 350 - V Collector Cut-Off Current ICEO VCE = 300V, IB = 0 µA ICEX VCE = 450V, IBE = 1.5V 500 ICBO VCB = 360V, IE = 0 Emitter Cut-Off Current IEBO VEB = 6V, IE = 0 ON Characteristics DC Current Gain (Note 1) hFE IC = 2mA, VCE = 10V 30 IC = 20mA, VCE = 10V 40 160 Collector - Emitter Saturation Voltage VCE(sat) IC = 50mA, IB = 4mA - - 0.5 V Base - Emitter Saturation Voltage VBE(sat) 1.3 Small Signal Characteristics Current Gain-Bandwidth Product fT IC = 10mA, VCE = 10V, f = 5MHz 15 - MHz Output Capacitance CObO VCB = 10V, IC = 0, f = 1MHz pF Input Capacitance CIbO VCB = 5V, IC = 0, f = 1MHz 75 Small-Signal Current Gain hfe IC = 5mA, VCE = 10V, f = 1MHz 25 - Real Part of Input Impedance Re(hie) VCE = 10V, IC = 5mA, f = 5MHz 300 Ω Note 1 : Pulse Test : Pulse Width %300µs, Duty Cycle % 2% Caution: The Sustaining voltage must not be measured on a curve tracer Electrical Characteristics (TA = +25°C unless otherwise specified) Dim. A B C D E F G H J K L Dimensions : Millimetres Pin Configurations: 1. Emitter 2. Base 3. Collector Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.