XO53 EUROQUARTZ

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 1

Technical content

EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE 5 x 3.2mm Low Power Consumption Clock Oscillator

DESCRIPTION

  • Micro-miniature 5.0mm x 3.2mm package, small footprint
  • Frequency Range 2.5MHz to 125MHz
  • Tristate function standard
  • Supply voltage 1.8, 2.5 or 3.3Volts

FEATURES

OUTLINE & DIMENSIONS Frequency Range: 2.50MHz to 125.0MHz Supply Voltage: 1.8, 2.5 Volts, 3.3 Volts Output Logic: LSTTL/CMOS Frequency Stability over Temperature Range 0° to +50°C: from ±10ppm 0° to +70°C: from ±15ppm -55° to +125°C: from ±25 Rise/Fall Time: 10ns max. (10% to 90%Vdd) (frequency dependant) Output Voltage: HIGH ‘1’: 90%Vdd minimum LOW ‘0’: 10%Vdd maximum Output Load CMOS: 15pF (50pF available for 3.3V supply) TTL: 10 LSTTL loads Duty Cycle: 50%±5% typical Supply Current: See table Startup Time 2.5MHz to 32MHz: 5ms max. 32MHz to 125MHz: 10ms max. Ageing: ±5ppm max. per year Phase Jitter RMS: 10ps typical Enable Time: 100ms max. Disable Time: 100ns max. Tristate Function (Pad 1): Output (Pad 3) is active if Pad 1 is not connected or a voltage of 2.2V or greater is applied to Pad 1. Output is high impedance when a voltage of 0.8V or lower is applied to Pad 1. Note: Parameters are measured at ambient temperature of 25°C, supply voltage as stated and a load of 15pF SPECIFICATION Example: 27.000MHz XO53050UCTA PART NUMBERING Frequency Series Designation XO53 Stability* 100 = ±100ppm 50 = ±50ppm 25 = ±25ppm Output Universal Operating Temp. Range C = Commercial (0°~70°C) I = Industrial (-40°~+85°C) Tristate Function Supply Voltage A = 3.3 Volts B = 2.5 Volts C = 1.8 Volts * For other stability requirements enter figure required. SOLDER TEMPERATURE PROFILE Frequency Range Supply Voltage (±10%) +1.8V +2.5V +3.3V 0.3 ~ 1.5MHz 1.5 ~ 20MHz 20 ~ 50MHz 50 ~ 125MHz 5mA 5mA 5mA 8mA 8mA 8mA 15mA 15mA 15mA 22mA 25mA 35mA CURRENT CONSUMPTION XO53 Series Oscillators The XO53 microminiature oscillators have a small footprint but is fully specified. The oscillator is available with supply voltage at 1.8, 2.5 or 3.3 Volts.