26PC0050DSMT SENSORTECHNICS
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 4
Technical content
26PC SMT Series (mbar) Temp. compensated and calibrated pressure sensors 1/4June 2005 / 598 www.sensortechnics.com
FEATURES
- High impedance bridge
- True surface mount miniature package
- Usable for wet/wet applications SPECIFICATIONS Maximum ratings Supply voltage Temperature limits Storage Operating Lead temperature (10 sec. soldering) Humidity limits Vibration (MIL-STD-202, Meth. 213) Mechanical shock(qualification tested) Proof pressure all 50, 100, 250 mbar devices 1 bar devices 16 V -55 to +100°C -40 to +85°C 260°C 0...100 %RH 150 g half sine 11 ms 150 g 1.4 bar 3.0 bar ELECTRICAL CONNECTION SERVICE All media compatible with port 1: - polyphtalamide - silver-filled silicone - silicon nitride port 2: - polyphtalamide - fluor-silicone - silicon Scale: 1 cm 1/2 inch Output Vs
26PC SMT Series (mbar) Temp. compensated and calibrated pressure sensors 2/4 June 2005 / 598 www.sensortechnics.com COMMON PERFORMANCE CHARACTERISTICS Vs = 10.0 ± 0.01 V, tamb = 25°C (unless otherwise noted) Specification notes: The maximum specified pressure which may be applied to the sensor without causing a permanent change in the output characteristics. Span is the algebraic difference between the output voltage at full-scale pressure and the output at zero pressure. Span is ratiometric to the supply voltage. Linearity (BSL), the deviation of measured output at constant temperature (25°C) from "Best Straight Line" determined by three points, offset pressure, full-scale pressure and half full-scale pressure. Error band of the offset voltage, and span in the specified temperature range, relative to the 25°C reading. Repeatability, the deviation in output readings for successive application of any given input pressure (all other conditions remaining constant. Hysteresis, the error defined by the deviation in output signal obtained when a specific pressure point is approached first with increasing pressure, then with decreasing pressure or vice versa (all other conditions remaining constant). Response time for 0 to full-scale pressure step change, readings taken at 10 % and 90 % of full-scale pressure. Long term stability of offset and span over a period over one year. The sensors might be used on both ports, for media compatible with the components, specified under "Service" (page 1). PRESSURE SENSOR CHARACTERISTICS Vs = 10.0 ± 0.01 V, tamb = 20°C (unless otherwise noted) rebmuntraPe russerpgnitarepO )1P>2P(napselacs-lluF 2 .pytytivitisneS.niM. pyTx aM . TMSD0500CP62r abm05-0V m6.01V m1.21V m6.31r abm/Vµ242 TMSD0010CP62r abm001-0V m12V m42V m72r abm/Vµ242 TMSD0520CP62r abm052-0V m43V m63V m5.83r abm/Vµ541 TMSD0K10CP62r abm0001-0V m39V m79V m101r abm/Vµ79 [ V½ full scale – { Vfull scale - Voffset (full scale pressure) x (½ full scale pressure) + Voffset }] : 2 (Vfull scale) x 100 % where: V = measured value for each device scitsiretcarahC. niM. pyT. xaMt inU tesffoerusserporeZ 2-2 + Vm)C°05-0(stceffeerutarepmeT 4 tesffO0 .1± napST MSD0500CP625 .1±5 .4± naps% TMSD0010CP625 .1±5 .4± TMSD0520CP620 .1±7 .1± TMSD0K10CP625 7.0±5 .1± )LSB,1P>2P(ytiraeniL 3 TMSD0500CP624 .0±6 .1± TMSD0010CP625 .0±5 7.1± TMSD0520CP623 .0±0 .1± TMSD0K10CP625 .0±0 .1± siseretsyhdnaytilibataepeR 5 2.0± ytilibatsmretgnoL 7 5.0± emitesnopseR 6 0.1s m
26PC SMT Series (mbar) Temp. compensated and calibrated pressure sensors 3/4June 2005 / 598 www.sensortechnics.com mass : 0.5 g dimensions in mm (inches) OUTLINE DRAWING
26PC SMT Series (mbar) Temp. compensated and calibrated pressure sensors 4/4 June 2005 / 598 www.sensortechnics.com 2 6 PC xxxx D SMT Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. SMT package Differential pressure
ORDERING INFORMATION
dimensions in mm (inches) 26PC series compensated Pressure range 0050: 0 - 50 mbar 0100: 0 - 100 mbar 0250: 0 - 250 mbar 01K0: 0 - 1000 mbar