262UR102A

262 CTS

Document overview

• PDF pages: 2

Technical content

Page 1

®

Commercial

Miniature

10mm Conductive

Plastic Trimmer

Potentiometers

Features

• Miniature size
• Adjustment knob slotted for front or rear screwdriver adjustment
• P.C. mounting with knob parallel or perpendicular to printed circuit board
• Low cost
• Low height profile
• Wide resistance range
• Reliable screened CTS composition element
• RoHS Compliant

Electrical and Mechanical Specifications

Resistance Range Standard: 500 ohms through 2 megohms. Special: Please consult CTS.

Resistance Tolerance Standard: ±20% Special: Available ±10%, ±30%

Power Rating, Watts 0.15 watts @ 40°C derated to no load @ 100°C.

Voltage Rating Operating maximum — 350 VDC. Load not to exceed wattage rating.

Resistance Tapers Linear

Adjustment Knob Color coded nylon knob with hex hole for top adjustment plus slot for either top or bottom screwdriver adjustment.

Standard Color Chart

Angle of Rotation Total Rotation: 265° ± 5° Effective Rotation: 260° (approximately)

Rotational Torque .3 to 5 in-oz (21.6 to 360 gf-cm)

Stop Strength 16 inch ounces (1.2 kgf-cm)

© 2006 CTS Corporation. All rights reserved. Information subject to change.

1 - 2

9/30/06

CTS Electronic Components

www.ctscorp.com

Page 2

CTS Type U262

mm DIMENSION: INCH

CTS Type X262

2.64 HEX x 1.40 DP. .104 HEX x .055 DP.

Ø1.30-Ø1.40 (3) HLS .051-.055

2.50 .098

2.50 .098 5.00 .197

mm DIMENSION: INCH

Ordering Information

Standard Stocked Series 262 Trimmers

CTS Series 262 trimmers are available off the shelf from

262 X R

103 B

Distributor Stock under the following part numbers.

RESIST TOL

A– ±10% B– ±20% C– ±30%

© 2006 CTS Corporation. All rights reserved. Information subject to change.

2 - 2

9/30/06

CTS Electronic Components

www.ctscorp.com