262 ETC2
Document overview
- Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Model 262 Tone Generator and Cable Tracer Kit Tone Generator: The Tone Generator is a hand-held, battery-powered instrument designed to perform a variety of tests on telephone lines. Alligator clips and standard RJ11 plug allow the tone generator to be connected to stripped wires, a terminal panel, wall plates, or modular single line jacks quickly. Cable Tracer: The Line Tracer is a hand-held inductive tracer that will help to identify wires without piercing the insulation. It can trace Tone Generator signals through dry wall, wood and many other non- metal surfaces (under ideal conditions). Features: Cable Tracer:
- Hi-gain, Hi-impedance amplifier
- Capable of identifying tones up to 12 inches away (under ideal conditions)
- Rugged, moisture resistant, Mylar cone speaker Tone Generator:
- Generates Warbled Tone with selectable test frequencies
- LED indicates continuity when in CONTINUITY mode
- LED indicates positive polarity when in POLARITY mode
- Provides talk current on a dead line
- Check line Polarity Cable Tracer Specifications: Weight: 4.9 oz. (138.9 g) Power: Standard 9-volt battery Tone Generator Specifications: Tone Output Level: Approximately 8 vp-p (+3dBm, 600 Tone Output Current: Approximately 4 mA Tone Frequency: 1.4KHz to 1KHz or 0.84KHz to 0.7KHz with switching freq. of 14Hz or 7Hz Continuity / Talk Test: 35mA (leads shorted), approximately 6.5 VDC (leads open) Weight: 5.8 oz. (164.4 g) Power: Standard 9-volt battery Model 262 Tone Generator and Cable Tracer Kit Data Sheet
1031 Segovia Circle, Placentia, CA 92870-7137
Tel.:(714) 237-9220, Fax:(714) 237-9214, www.bkprecision.com