HV14 EUROQUARTZ

Document overview

  • PDF pages: 1

Technical content

Page 1

EURO QUARTZ

HV14 Series Oscillators

14 pin DIL High Frequency HCMOS Clock Oscillator

FEATURES

  • Industry-standard 14 pin DIL package
  • Frequency Range 125MHz to 200MHz
  • High frequency range at low cost
  • Supply voltage 2.5V or 3.3Volts
  • Tristate function option to conserve power

DESCRIPTION

HV14 series oscillators are designed to provide a high quality HCMOS output at high frequencies from 125MHz to 200MHz. Phase and RMS period jitter are kept within low limits. An enable/disable function is standard and the oscillator may also be specified with a power down function.

SPECIFICATION

Frequency Range:

125.0MHz to 200.0MHz

Output Logic:

HCMOS

Phase Jitter:

3.5ps typical

RMS Period Jitter:

4.0ps typical

Frequency Stability Commercial:

±25ppm to ±100ppm -10° to +70°C

Industrial:

±25ppm to ±100ppm -40° to +85°C

Input Voltage:

+2.5V to +3.3VDC ±10%

Output Voltage High '1':

+2.97V minimum

Low '0':

+0.33 V maximum

Rise/Fall Time:

0.25ns typical, 0.5ns max. (20%Vdd to 80%Vdd)

Current Consumption:

80mA typical (Frequency dependent)

Load:

15pF

Start-up Time:

5ms typical, 10ms maximum

Duty Cycle:

50% ±5% (Measured at Vdd-1.3V)

Input Static Discharge Protection:

2kV maximum

Ageing:

±2pmm per year maximum

ABSOLUTE MAXIMUM RATINGS

Permanent damage may occur if units are operated beyond specified limits. Supply Voltage:

+4.6 VDC max.

Input Voltage Vi:

Vss-0.5 min., Vdd +0.5V max.

Input Voltage Vo:

Vss-0.5 min., Vdd +0.5V max.

PART NUMBER SCHEDULE

3HV14GC-150.000

Example:

PDF page 1 diagram

Supply Voltage 25 = 2.5 Volts 3 = 3.3 Volts Series Designation RoHS Compliance Stability Code A = ±25ppm -10°~+70°C B = ±50ppm -10°~+70°C C = ±100ppm -10°~+70°C D = ±25ppm -40°~+85°C E = ±50ppm -40°~+85°C F = ±100ppm -40°~+85°C Nominal Frequency:

OUTLINE & DIMENSIONS

PDF page 1 diagram

SOLDER TEMPERATURE PROFILE

PDF page 1 diagram

TRISTATE

DISABLE

Output is disabled when Pin 1 is taken below 0.3 Vcc referenced to ground Oscillator is continues to run.

ENABLE

Oscillator is enable when Pin 1 is taken above 0.7 Vcc referenced to ground.

POWER DOWN Available by special request: Oscillator shuts down

when disabled.

EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 info@euroquartz.co.uk www.euroquartz.co.uk

Registered in England No: 1773012