2492170000

2492170000 WEIDMULLER

Document overview

• Manufacturer or author: Provided By digicamel.com
• PDF pages: 6

Technical content

Creation date July 2, 2018 10:30:55 AM CEST Catalogue status 29.06.2018 / We reserve the right to make technical changes. 1 OMNIMATE Power - series LU LUFS 10.00/08/180V 5.0SN BK BX Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com General ordering data Type LUFS 10.00/08/180V 5.0SN BK BX Order No. 2492170000 Version PCB terminal, 10.00 mm, No. of poles: 8, 180°, Solder pin length (l): 5 mm, tinned, Black, PUSH IN, Clamping range, max. : 16 mm², Box GTIN (EAN) 4050118559897 Qty. 10 pc(s). Product data IEC: 1000 V / 76 A / 0.5 - 16 mm² UL: 600 V / 57 A / AWG 18 - AWG 4 Packaging Box High-performance PCB terminal with a PUSH IN connection system for conductor cross-sections up to 16 mm².

• Fast connection without tools thanks to pushers to open the contact point, or direct plug-in method
• Securely closed contact point, with the "Connection Safety Concept" the conductor is always clamped securely
• Integrated test point for PS 2.0 test plug
• Central tip test point for test probes on the upper side of the terminal
• Increased derating reserves because WEMID insulating material is used.
• Conductor outlet direction of 180°

OMNIMATE Power - series LU LUFS 10.00/08/180V 5.0SN BK BX Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.comTechnical data Creation date July 2, 2018 10:30:55 AM CEST Catalogue status 29.06.2018 / We reserve the right to make technical changes. 2 Dimensions and weights Net weight 64.888 g System parameters Product family OMNIMATE Power - series LU Wire connection method PUSH IN Mounting onto the PCB THT solder connection Conductor outlet direction 180° Pitch in mm (P) 10 mm Pitch in inches (P) 0.394 inch No. of poles 8 Fitted by customer No Solder pin length (l) 5 mm Solder pin dimensions d = 1.2 mm, Octagonal Solder eyelet hole diameter (D) 1.6 mm Solder eyelet hole diameter tolerance (D)+ 0,1 mm Number of solder pins per pole 3 Screwdriver blade 0.8 x 4.0 Stripping length 18 mm L1 in mm 70 mm L1 in inches 2.756 inch Touch-safe protection acc. to DIN VDE 0470 IP20 plugged/ IP10 unplugged Touch-safe protection acc. to DIN VDE 57 106 Safe from finger touch Material data Insulating material Wemid (PA) Colour Black Colour chart (similar) RAL 9011 Insulating material group I CTI ≥ 600 Insulation resistance ≥ 108 Ω UL 94 flammability rating V-0 Contact base material E-Cu Contact surface tinned Layer structure of solder connection 4-10 µm Sn matt Storage temperature, min. -25 °C Storage temperature, max. 55 °C Max. relative humidity during storage 80 % Operating temperature, min. -40 °C Operating temperature, max. 120 °C Conductors suitable for connection Clamping range, min. 0.5 mm² Clamping range, max. 16 mm² Wire connection cross section AWG, min. AWG 18 Wire connection cross section AWG, max. AWG 4 Solid, min. H05(07) V-U 0.5 mm² Solid, max. H05(07) V-U 16 mm² Stranded, min. H07V-R 6 mm² Stranded, max. H07V-R 16 mm² Flexible, min. H05(07) V-K 0.5 mm² Flexible, max. H05(07) V-K 16 mm² w. plastic collar ferrule, DIN 46228 pt 4, min. 0.5 mm² w. plastic collar ferrule, DIN 46228 pt 4, max. 16 mm² w. wire end ferrule, DIN 46228 pt 1, min 0.5 mm² w. wire end ferrule, DIN 46228 pt 1, max. 16 mm² Plug gauge acc. to EN 60999 a x b; Ø 5.4 mm x 5.1 mm; 5.3 mm

OMNIMATE Power - series LU LUFS 10.00/08/180V 5.0SN BK BX Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.comTechnical data Creation date July 2, 2018 10:30:55 AM CEST Catalogue status 29.06.2018 / We reserve the right to make technical changes. 3 Rated data acc. to IEC tested acc. to standard IEC 60947-7-4 Rated current, min. no. of poles (Tu=20°C) 76 A Rated current, max. no. of poles (Tu=20°C) 76 A Rated current, min. no. of poles (Tu=40°C) 76 A Rated current, max. no. of poles (Tu=40°C) 67 A Rated voltage for surge voltage class / pollution degree II/2 1,000 V Rated voltage for surge voltage class / pollution degree III/2 1,000 V Rated voltage for surge voltage class / pollution degree III/3 1,000 V Rated impulse voltage for surge voltage class/ pollution degree II/2 6 kV Rated impulse voltage for surge voltage class/ pollution degree III/2 8 kV Rated impulse voltage for surge voltage class/ contamination degree III/3 8 kV Rated data acc. to CSA Rated voltage (Use group B) 600 V Rated voltage (Use group C) 600 V Rated voltage (use group D) 600 V Rated current (use group B) 57 A Rated current (use group C) 57 A Rated current (use group D) 5 A Wire cross-section, AWG, min. AWG 18 Wire cross-section, AWG, max. AWG 4 Rated data acc. to UL 1059 Institute (cURus) Certificate No. (cURus) E60693 Rated voltage (use group B) 600 V Rated voltage (use group C) 600 V Rated voltage (use group D) 600 V Nominal voltage (use group F) 1,000 V Rated current (use group B) 57 A Rated current (use group C) 57 A Rated current (use group D) 5 A Nominal current (use group F) 57 A Wire cross-section, AWG, min. AWG 18 Wire cross-section, AWG, max. AWG 4 Reference to approval values Specifications are maximum values, details - see approval certificate. Classifications ETIM 3.0 EC001284 ETIM 4.0 EC002643 ETIM 5.0 EC002643 ETIM 6.0 EC002643 eClass 6.2 27-26-11-01 eClass 9.1 27-44-04-01

OMNIMATE Power - series LU LUFS 10.00/08/180V 5.0SN BK BX Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.comTechnical data Creation date July 2, 2018 10:30:55 AM CEST Catalogue status 29.06.2018 / We reserve the right to make technical changes. 4 Notes Notes • Additional colours on request

• Rated current related to rated cross-section & min. No. of poles.
• Wire end ferrule without plastic collar to DIN 46228/1
• Wire end ferrule with plastic collar to DIN 46228/4
• P on drawing = pitch
• Rated data refer only to the component itself. Clearance and creepage distances to other components are to be designed in accordance with the relevant application standards.
• The test point can only be used as potential-pickup point. IPC conformity Conformity: The products are developed, manufactured and delivered according international recognized standards and norms and comply with the assured properties in the data sheet resp. fulfill decorative properties in accordance with IPC-A-610 "Class 2". Further claims on the products can be evaluated on request. Approvals Approvals Downloads Approval/Certificate/Document of Conformity Declaration of the Manufacturer Engineering Data STEP Motion controllers white paper Download Whitepaper White Paper UL 600 V Download Whitepaper

OMNIMATE Power - series LU LUFS 10.00/08/180V 5.0SN BK BX Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.comDrawings Creation date July 2, 2018 10:30:55 AM CEST Catalogue status 29.06.2018 / We reserve the right to make technical changes. 5 Dimensional drawing Derating curve Derating curve

Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com 260 240 220 200 180 160 140 120 100 0 0 20 40 60 80 100 120 140 160 180 200 220 240 time [s] Temperature [°C] Preheating Cooling rate < 6 °K/s 250 °C 260 °C Heating rate < 3 °K/s 255 °C Typical process Process limits Temperature on board Total contact time max. 10 sec. appr. 150°C 260 240 220 200 180 160 140 120 100 0 0 20 40 60 80 100 120 140 160 180 200 220 240 time [s] Temperature [°C] Preheating Cooling rate < 6 °K/s 250 °C 260 °C Contact time appr. 3 sec. Typical process Prozess limits Temperature on board Heating rate < 3 °K/s 255 °C appr. 150 °C Wave soldering profiles Wired connection elements should be processed in accordance with the DIN EN 61760-1 standard. We have included two recommendations for practical wave soldering profiles, with which Weidmüller PCB terminals and connectors are qualified. When choosing a suitable profile for your application, the following factors also need to be considered: - PCB thickness - Proportion of Cu in the layers - Single/double-sided assembly - Product range - Heating and cooling rates The single and double wave profiles each indicate the recommended operating range, including the maximum soldering temperature of 260°C. In practice, the maximum soldering temperature is quite often well below the above maximum profile. Wave Solder Profile Recommended wave solderding profiles We reserve the right to make technical changes. Single Wave: Double Wave: