DATASHEET SEARCH SITE
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 2
Technical content
Dimensions in Inches (millimeters) are subject to change without notice. www.glenair.com E-Mail: sales@glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 F-18 MIL-DTL-26500 Type F A Typ B Typ 3 Ø G Max Ø E Max Resilient Insert Ø D Shell I D Ø C Max .904 (23.0) Max .104 (2.6) .052 (1.3) .728 (18.5) .708 (18.0) 1.100 (27.9) .025 (0.6) Min Width.433 (11.0) to Rear of Fully-mated Indicator Line Marking Location Optional R Thread How To Order: Commercial Alternate Key Position 6, 7, 8, 9, 10 (Omit for Normal) Shell Size (See Table I) 237-165 SM 12 - 3 P 6 Basic Series Contact Termination P - Pin, Solder Cup X - Pin, Eyelet Connector Material / Finish SM - Carbon Steel/Electroless Nickel Insert Arrangement MIL-STD-1554 See Pages F-2 – F-3 237-165 MIL-DTL-26500 Type Hermetic Class Receptacle MS26424H*T** Type Square Flange Mount, Threaded Coupling
Dimensions in Inches (millimeters) are subject to change without notice. www.glenair.com E-Mail: sales@glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 F-19 MIL-DTL-26500 Type F 237-165 MIL-DTL-26500 Type Hermetic Class Receptacle MS26424H*T** Type Square Flange Mount, Threaded Coupling APPLICATION NOTES 1. Assembly identified with manufacturer’s name and part number, space permitting. 2. Glenair 237-165 will mate with any QPL MIL-DTL-26500 type threaded coupling plug of same size, keyway and insert polarization. 3. Performance: Hermeticity - <x10 -7 ccHe/sec @ 1 atmosphere differential Dielectric withstanding voltage - consult factory or MIL-STD-1554 Insulation resistance - 5000 megohms min @ 500VDC 4. Material/ Finish: Shell––C1215 Steel/Electroless nickel Contacts—52 Nickel alloy/Gold plated Insulators—Glass/NA Seals—fluorosilicone elastomer N.A. 5. Metric Dimensions (mm) are indicated in parentheses. TABLE I: Shell Size, Connector Dimensions and Panel Cut-Out Shell Size A B Ø C Ø D Shell I.D. Ø E Max Resilient Insert Ø G Max Ø H Through
4 Places
Min Ø (12.7/12.5) .433/.428 (14.3/14.1) .535/.530 (19.1/18.9) .705/.700 (20.6/20.5) .774/.769 (23.8/23.6) .901/.896 (27.0/26.8) 1.007/1.002 (30.1/30.0) 1.132/1.125 (33.3/33.2) 1.257/1.252 (36.5/36.3) 1.382/1.377