DATASHEET SEARCH SITE
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 2
Technical content
www.glenair.com E-Mail: sales@glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 D-32 MIL-DTL-26482 Type D 237-133 MIL-DTL-26482 Series I, MS3112 Type Hermetic Square Flange Mount Receptacle with Bayonet Coupling and Solder Cup Termination Insert Arrangement Per MIL-STD-1669 (See Note 5) Series 237 MIL-DTL-26482 Type 237 - 133 Z1 10 - 6 P X - 1 Shell Size Connector Style 133 = Square Flange Mount Hermetic Receptacle Contact Style P = Solder Cup, Pin Face X = Eyelet, Pin Face Alternate Key Position W, X, Y or Z (Omit for Normal) See Note 5 finish Z1 = Passivate FT = Fused Tin O-Ring Omit for O-Ring 1 = No O-Ring APPLICATION NOTES 1. Material/Finish: Z1 Shell - 304 CRES/passivated. FT Shell - C1215 CRS/Tin plated. Titanium and Inconel® available. Consult factory. Contacts - 52 nickel alloy/Tin plate. Bayonets - Stainless Steel/passivated. O-Ring Seal - Silicone elastomer/N.A. Insulator - Glass/N.A. 2. To be identified with manufacturer’s name, part number and date code, space permitting. 3. Hermeticity - <1 x 10-7 cc/sec @ 1 atm differential. Dielectric withstanding voltage - Consult factory or MIL-STD-1669. Insulation resistance - 5000 megohms min @500VDC. 4. Glenair 237-133 will mate with any QPL MIL-DTL-26482 Series I bayonet coupling plug of same size and insert polarization with opposite contact gender. 5. Consult factory and/or MIL-STD-1669 for arrangement and insert position options. 6. Metric Dimensions (mm) are indicated in parentheses. "P" Size 20 Contacts "V" Size 16 Contacts K Min A Max (Typ) Master Polarizing Keyway .140 (3.56)Min. (See Note 2) Part Identification (See Note 2) 37-132z Ø CØ D Min B Typ .060 (1.52) Width Polarizing Stripe J G Vitreous Insert O-Ring Gasket F E D C BA F Ø H Typ 4 Pl
www.glenair.com E-Mail: sales@glenair.com GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 D-33 MIL-DTL-26482 Type D TABLE I: CONNECTOR AND CUT-OUT DIMENSIONS (Continued Below) Shell Size A B C Dia Mounting Locator D Dia Min F G .462/.431 (11.73/10.95) .078/.046 (1.98/1.17) (14.96/14.43) HERMETIC LEAK RATE MOD CODES Designator Required Leak Rate –585A 1 x 10-10 cc Helium per second –585B 1 x 10-9 cc Helium per second –585C 1 x 10-8 cc Helium per second TABLE I: CONNECTOR AND CUT-OUT DIMENSIONS (Continued from Above) Shell Size H J K P v Panel Cut-Out Dia .120 (3.05) .063/.037 (4.52/3.00) .248/.118 (6.30/3.00) .570 (14.48) 10 .680 (3.67) 12 .789 (20.04) 14 .914 (23.22) 16 1.039 (26.39) 18 1.164 (29.57) .095/.063 1.258 (31.95) 22 .146/.086 (37.08/2.18) 2.16/.156 (54.86/3.96) 1.383 (35.13) 237-133 MIL-DTL-26482 Series I, MS3112 Type Hermetic Square Flange Mount Receptacle with Bayonet Coupling and Solder Cup Termination