23-21-G6C-AL2N1-2T EVERLIGHT
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 10
Technical content
Features
․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS complaint version. Descriptions ․The 23-21 SMD Taping is m uch sm aller than lead fra me type com ponents, thus enable sm aller board size, higher packing density, red uced storag e space and finally smaller equipment to be obtained. ․Besides, lightweigh t m akes them idea l f or miniature applications. etc.
Applications
․backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Part No. Material Emitted Color Lens Color 23-21/G6C-AL2N1/2T AlGaInP Brilliant Yellow Green Water Clear
EVERLIGHT ELECTRONICS CO.,LTD. 23- 21/G6C-AL2N1/2T Ev erlight Electronics Co., Ltd. h ttp://www.everlight.com Rev 1 Page: 2 of 10 Device No:SZDSE-231-G03 Pr epared date: 24-Feb-2006 Pr epared by: Zhang huali Package Outline Dimensions Polarity Notes: Tolerances Unless Dimension ±0.1mm, Unit = mm
EVERLIGHT ELECTRONICS CO.,LTD. 23- 21/G6C-AL2N1/2T Ev erlight Electronics Co., Ltd. h ttp://www.everlight.com Rev 1 Page: 3 of 10 Device No:SZDSE-231-G03 Pr epared date: 24-Feb-2006 Pr epared by: Zhang huali Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Electrostatic Discharge(HBM) ESD 2000 V Power Dissipation Pd 60 mW Peak Forward Current (Duty 1/10 @1KHz) IFP 60 mA Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 14.5 ----- 36.0 mcd Viewing Angle 2θ1/2 ----- 130 ----- deg Peak Wavelength λp ----- 575 ----- nm Dominant Wavelength λd 569.5 ----- 577.5 nm Spectrum Radiation Bandwidth △λ ----- 20 ----- nm Forward Voltage VF 1.7 2.0 2.4 V IF=20mA Reverse Current IR ----- ----- 10 μA VR=5V Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Dominant Wavelength ±1nm
EVERLIGHT ELECTRONICS CO.,LTD. 23- 21/G6C-AL2N1/2T Ev erlight Electronics Co., Ltd. h ttp://www.everlight.com Rev 1 Page: 4 of 10 Device No:SZDSE-231-G03 Pr epared date: 24-Feb-2006 Pr epared by: Zhang huali Bin Range Of Luminous Intensity Bin Min Max Unit Condition L2 14.5 18.0 M1 18.0 22.5 M2 22.5 28.5 N1 28.5 36.0 mcd IF =20mA Bin Range Of Dom. Wavelength Group Bin Min Max Unit Condition C16 569.5 571.5 C17 571.5 573.5 C18 573.5 575.5 A C19 575.5 577.5 nm IF=20mA Notes: 1.Tolerance of Luminous Intensity ±10% 2.Tolerance of Dominant Wavelength ±1nm
EVERLIGHT ELECTRONICS CO.,LTD. 23- 21/G6C-AL2N1/2T Ev erlight Electronics Co., Ltd. h ttp://www.everlight.com Rev 1 Page: 5 of 10 Device No:SZDSE-231-G03 Pr epared date: 24-Feb-2006 Pr epared by: Zhang huali Typical Electro-Optical Characteristics Curves
EVERLIGHT ELECTRONICS CO.,LTD. 23- 21/G6C-AL2N1/2T Ev erlight Electronics Co., Ltd. h ttp://www.everlight.com Rev 1 Page: 6 of 10 Device No:SZDSE-231-G03 Pr epared date: 24-Feb-2006 Pr epared by: Zhang huali Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank xxxxxx xxxxxx xxxxxxxxxxxx xxxx xxxxxxxx RoHS REF: Forward Voltage Rank Reel Dimensions Note: Tolerances Unless Dimension ±0.1mm ,Unit = mm
EVERLIGHT ELECTRONICS CO.,LTD. 23- 21/G6C-AL2N1/2T Ev erlight Electronics Co., Ltd. h ttp://www.everlight.com Rev 1 Page: 7 of 10 Device No:SZDSE-231-G03 Pr epared date: 24-Feb-2006 Pr epared by: Zhang huali Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: Tolerances Unless Dimension ±0.1mm , Unit = mm Moisture Resistant Packaging Label Desiccant LabelAluminum moisture-proof bag
EVERLIGHT ELECTRONICS CO.,LTD. 23-21/G6C-AL2N1/2T Everlight Electronics Co., Ltd. http://www.ever light.com Rev 1 Page: 8 of 10 Device No:SZDSE-231-G03 Prepared date: 24-Feb-2006 Prepared by: Zhang huali Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1
2 Temperature Cycle
H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1
3 Thermal Shock
H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1
4 High Temperature
Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1
5 Low Temperature
Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1
7 High Temperature /
High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1
EVERLIGHT ELECTRONICS CO.,LTD. 23- 21/G6C-AL2N1/2T Ev erlight Electronics Co., Ltd. h ttp://www.everlight.com Rev 1 Page: 9 of 10 Device No:SZDSE-231-G03 Pr epared date: 24-Feb-2006 Pr epared by: Zhang huali Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90% RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30℃ or less and 60% RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.
EVERLIGHT ELECTRONICS CO.,LTD. 23- 21/G6C-AL2N1/2T Ev erlight Electronics Co., Ltd. h ttp://www.everlight.com Rev 1 Page: 10 of 10 Device No:SZDSE-231-G03 Pr epared date: 24-Feb-2006 Pr epared by: Zhang huali 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936 Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306 Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com