DATASHEET SEARCH SITE

Document overview

  • Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • In accordance with Underwriters Laboratories Standard UL 248-14
  • Available in cartridge and axial lead format with various forming dimensions
  • RoHS compliant and Lead-free RoHS Electrical Characteristics for Series

Applications

Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits. PS E

Description

Application testing is strongly recommended. Accessories For recommended fuse accessories for this product series, see ‘Recommended Accessories’ section. Additional Information Datasheet SamplesResources

© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/23/16 Axial Lead & Cartridge Fuses 2AG > Special Fuse > 220 Series Average Time Current CurvesT emperature Re-rating Curve 100 0.1 0.01 0.001 0.1 11 0 100 1000 .200A .100A .250A .375A .500A .750A 1.0A 1.5A 2.0A 2.5A 10A TIME IN SECONDS CURRENT IN AMPERES Ampere Rating (A) Amp Code Max Voltage Rating (V) Interrupting Rating Nominal Cold Resistance (Ohms) Nominal Melting I2t (A2 sec) Agency Approvals PS E 0.35 0003 250 35A@250Vac, 10KA@125Vac 1 .3100 0.490 X X X 0.35 0004 250 1 .3100 0.490 X X X 3 0007 350 100A@350Vac, 60A@530Vac 0.0317 4.62 X X X X 0.55 0010 250 35A@250Vac, 10KA@125Vac, 10KA@125Vdc 0.4945 2.04 X X X 0.35 0 011 250 35A@250Vac, 10KA@125Vac 1 .3100 0.49 X X X 2 0012 350 100A@350Vac 0.0497 1 .50 X X X 5 0013 300 0.0186 1 7. 0 X X X X 3 0019 350 100A@350Vac, 100A@125Vdc 0.0317 4.62 X X X X 1 .25 0025 250 100A@250Vac, 10KA@125Vac, 10KA@125 Vdc 0.1460 15.4 X X X 0.35 0029 250 35A@250Vac, 10KA@125Vac 1 .3100 0.490 X X X 0.375 0030 250 35A@250Vac, 10KA@125Vac, 10KA@125Vdc 1 .1685 0.82 X X 0.3 0031 250 0.5900 0.0300 X X 0.5 0036 300 35A@300Vac, 10KA@125Vac 0.2650 0.365 X X 0.75 0037 300 0.1520 1 .05 X 5 0038 250 50A@250Vac 0.0186 267 X 0.5 0040 250 35A@250Vac, 10KA@125Vac, 10KA@125Vdc 0.6935 1 .58 X 1 0044 350 100A@350Vac 0.1027 2.22 X X X X 2 0045 350 100A@250Vac, 100A@350Vac, 10KA@125Vac, 10KA@125Vdc 0.0698 30.0 X X X 7 0059 350 100A@350Vac / 160A@140Vdc 0.0116 464 X X X 0.5 0060 350 35A@350Vac 0.2650 0.365 X X 0.75 0061 350 0.1520 1 .05 X X

Electrical Characteristics

Note: Rerating depicted in this curve is in addition to the standard derating of 25% for continuous operation.

© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/23/16 Axial Lead & Cartridge Fuses 2AG > Special Fuse > 220 Series Product Characteristics Dimensions Operating T emperature-55 ºC to +125 ºC Thermal Shock MIL -STD-202, Method 107 , Test Condition B: (5 cycles - 65ºC to 125ºC) Vibration MIL -STD-202, Method 201 Humidity MIL -STD-202, Method 103, Test Condition A: High RH (95%) and Elevated Temp (40 ºC) for 240 hours Salt Spray MIL -STD-202, Method 101, Test Condition B Material Body: Glass Cap: Nickel–plated brass Leads: Tin–plated Copper T erminal Strength MIL -STD-202, Method 211, Test Condition A Solderability MIL -STD-202 method 208 Product Marking Cap1: Brand logo, current and voltage ratings Cap2: Series and agency approval marks Part Numbering System Soldering Parameters - Wave Soldering Dwell Time 100 120 140 160 180 200 220 240 260 280 300 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 Time (Seconds) Temperature (°C) - Measured on bottom side of board Cooling TimePreheat Time Wave Parameter Lead-Free Recommendation Preheat: (Depends on Flux Activation Temperature) (Typical Industry Recommendation) Temperature Minimum: 100°C Temperature Maximum: 150°C Preheat Time: 60-180 seconds Solder Pot Temperature: 260°C Max. Solder Dwell Time: 2-5 seconds Recommended Hand-Solder Parameters: Solder Iron Temperature: 350°C +/- 5°C Heating Time: 5 seconds max. Note: These devices are not recommended for IR or Convection Reflow process. Recommended Process Parameters: Packaging For 02200019MXP 4.2 - 4.8 (.16" - .19”) .635 ± .06 (.025" ± .002”) Length L 4.2 - 4.8 (.16" - .19”) 14.1 - 14.9 (.56" - .59”) 14.1 - 14.9 (.56" - .59”) 14.1 - 14.9 (.56" - .59”) .635 ± .06 (.591" ± .047”) 20 ± 1.5 (.79" ± .059”) 4.2 - 4.8 (.16" - .19”) Length L: 220 000P Series Packaging Option Packaging Specification Quantity Quantity & Packaging Code Reel Size Bulk N/A 1000 MX N/A Bulk N/A 1000 MXSL N/A Reel and Tape EIA 296-E 1000 MRT1 53mm (2.087”) Reel and Tape EIA 296-E 1500 DAT1 53mm (2.087”) Reel and Tape EIA 296-E 1500 DRT1 53mm (2.087”) Reel and Tape EIA 296-E 1500 DRT2 63mm (2.500”) Reel and Tape EIA 296-E 1500 DRT3 73mm (2.87 4”) Reel and Tape EIA 296-E 2500 ERT1 53mm (2.087”) Note: Please contact Littelfuse for other lead length or forming type.

© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 06/23/16 Axial Lead & Cartridge Fuses 2AG > Special Fuse > 220 Series Recommended Accessories Accessory Type Series Description Max Application Voltage Max Application Amperage Holder

245 Panel Mount Shock-Safe Fuseholder 300 10

150 In-Line Fuseholder 350 10

286 Panel Mount Flip-Top Shock-Safe Fuseholder 250 10

Block 254 OMNI-BLOK® Fuse Block 400 10 Clip 111 PC Board Mount Fuse Clip 250 10 Notes: 1 . Do not use in applications above rating. 2. Please refer to fuseholder data sheet for specific re-rating information. 3. Please contact factory for applications greater than the max voltage and amperage shown.