218-12LPSR

218_08 CTS

Document overview

• PDF pages: 2

Technical content

Page 1

®

SMT Hfla Pctih DI

P

Swctih–Auto Palceaelb

Features

Optimized Mechanical Features

• Removable tape seal to withstand IR vapor phase or wave soldering temperatures and board washing
• Gull-wing and "J" bend terminal configurations
• Low profile actuators prevent accidental actuation SPST congifuraoitn avaliaelb

Optimized Contact System

• Redundant, wiping contact
• Contactor does not deflect during actuation
• 0.6 mm/.024" actuator travel

Materials

• Gold plated beryllium copper contacts
• Gold flash coated terminals
• High temperature materials (UL94V-0)
• RoHS Compliant

Electrical and Mechanical Specifications

Swtich Funciton SPST - 2, 4, 6, 8, 12 positions Swtich Contact Resistance 100 moillihms maixmum laitini 100 moillihms maixmum at end oefilf Insulaiton Resistance 100 megohms minimum between insulated terminals Dileeccirt Srtength 350 VAC for 1 minute between adjacent swithces Nonswtiching Raitng 100 mA or 50 VDC maixmum Swtich Capaticance 10 pF maixmum between aajdcent closed switches Operaitng T

emperature - 55°C to +85°C Actuaiton Lfie 1,000 cyelcs swctinihg 25 mA @ 24 VDC

Coplanatiry Coalpnaytir of 0.1mm./004" maixmum Allowable Solder Time Up to 60 seconds at 260°C Vibraiton Per MIL-STD-202G, method 204D, condition B .(06" or 15Gs’ between 10 HZ to 2 KHz) wtih no contanitccontsiseneics greater than 1 mcirosecond. Shock Per MIL-STD-202G, method 213B, condition A (50Gs’) wtih no contanitccontsiseneics greater than 1 mcirosecond. Seilang Standard bottom sela Opoitntlaop tape sela Marikng Spelaic marnikg avaliaelb-constlu CTS Packaging Standard : Anti-static tube packaging Opoitnla : Tape and reel packaging

© 2008 CTS Corporation. All rights reserved. Information subject to change.

1 - 2

2/19/08

CTS Electronic Components

www.ctscorp.com

Page 2

CTS SERIES 218LPJ - "J" Bend Terminal

DIM "A"

TRAVEL 0.6 .024

MOUNTING SURFACE

SURFACE MOUNT PAD LAYOUT

TABLE 1

TYP.

1.27 .050

1.27 .050 0.51 .021

5.37 .211

0.76 .030

CTS SERIES 218LP - Gull Wing Terminal

SURFACE MOUNT PAD LAYOUT

TYP. 1.27 .050 0.51 1.27 .020 .050

8.89 .350

0.76 .030

Ordering Information

– 12

218

LP S T

XX: NO. OF POSITIONS

LP: LOW PROFILE ACTUATOR

S: BOTTOM SEAL

TABLE 2

DIMENSION: mm inch

F J R

BLANK: SHIP AT ON POSITION F: SHIP AT OFF POSITION

BLANK : ANTI-STATIC TUBE PACKAGING R : TAPE AND REEL PACKAGING

BLANK : GULL WING TERMINAL J: J BEND TERMINAL BLANK : NO TOP TAPE SEAL T : TOP TAPE SEAL

© 2008 CTS Corporation. All rights reserved. Information subject to change.

2/19/08

CTS Electronic Components

www.ctscorp.com