210-12LPS

209-12MSTFD CTS

Document overview

• PDF pages: 2

Technical content

Page 1

AUTO-DIP® Switch

Automatically

Insertable, Wave

Solderable, Board

Washable DIP Switch

Features

Optimized Mechanical Features

• Fully sealed to withstand insertion shock, wave solder temperatures, and board washing
• Positive detent separated from contactor
• Compatible with Amistar, DynaPert, Universal, NETCO assembly and other machines

Optimized Contact System

• Redundant, wiping contact
• Contactor does not deflect during actuation
• Available low profile, medium and extended height actuator

Materials

• Series 209 - gold plated beryllium copper contacts
• Series 210 - gold flash plated beryllium copper contacts
• High temperature materials (UL94V-0)
• RoHS compliant

Electrical and Mechanical Specifications

Switch Function SPST- 2 through 10 and 12 positions

Switch Contact Resistance

Insulation Resistance 1,000 megohms minimum between insulated terminals Dielectric Strength 500 VDC for 1 minute between adjacent switches Nonswitching Rating 100 mA or 50 VDC maximum Switch Capacitance 5 pF maximum between adjacent closed switches Actuation Life Series 209: 2,000 cycles switching @ 100 mA, 20 VDC or @ .1 mA, 5 VDC (dry circuit) Series 210: 1,000 cycles switching @ 100 mA, 20 VDC or @ .1 mA, 5 VDC (dry circuit)

Series 209 – Premium AUTO-DIP Switches Series 210 – Economical AUTO-DIP Switches

Allowable Solder Time Up to 5 seconds at 260°C Vibration Per MIL-STD-202F, method 204D, condition B (.06" or 15 G’s between 10 HZ to 2K HZ) with no contact inconsistencies greater than 1 microsecond. Shock Per MIL-STD-202F, method 213B, condition A (50 G’s) with no contact inconsistencies greater than 1 microsecond. Sealing Standard bottom seal Optional top tape seal

Operating Temperature –40°C to +85°C

Packaging Standard : Anti-Static tube packaging

© 2008 CTS Corporation. All rights reserved. Information subject to change.

1 - 2

12/30/08

CTS Electrocomponents

www.ctscorp.com

Page 2

CTS AUTO-DIP® SERIES CON TACT FE ATURES

1. Wiping contact action

1. Redundant (bifurcated) cross radial contactor

1. Contactor does not deflect during actuation

1. Value of Redundant (Bifurcated)

Contacts:Redundancy dramatically reduces the probability of contact failure, IMPROVING RELIABILITY.

2. Value of Wiping Contact Action: Clean

contact area, IMPROVING RELIABILITY.

3. Value of Contactor Not Deflecting

During Actuation : Constant contact pressure eliminates overstressing contacts, IMPROVING RELIABILITY.

4. Value of Detent Separate from

Contactor: Separate detent allows optimization of nondeflecting contactor and detent designs, IMPROVING RELIABILITY.

Ordering Information

12 M S T F D

209/210

–

BLANK : SHIP AT ON POSITION F : SHIP AT OFF POSITION

XX: NO. OF POSITION

BLANK : NO TOP TAPE SEAL

BLANK : AUTO-INSERTABLE TERMINAL

E: EXTENDED HEIGHT ACTUATOR(0.6mm/.024”)

\* T: TOP TAPE SEAL

D : STRAIGHT TERMINAL

Not available on Extended

M: MEDIUM ACTUATOR(0.25mm/.010”)

\* actuator

LP: LOW PROFILE (Flush)

S: BOTTOM SEAL

© 2008 CTS Corporation. All rights reserved. Information subject to change.

2 - 2

12/30/08

CTS Electronic Components

www.ctscorp.com