EMME-AS-80-M-LS-AMB FESTO

Document overview

  • PDF pages: 2

Technical content

Page 1

Servo motor EMME-AS-80-M-LS-AMB

Part number: 2093171

PDF page 1 diagram

Data sheet

Feature Value
Number of pole pairs 3
Type code EMME-AS
Rotor position sensor Absolute encoder, multi-turn
Rotor position sensor interface HIPERFACE®
Rotor position sensor measuring principle Capacitive
Max. rotational speed 4627 1/min
Nominal rotary speed 3000 1/min
Brake DC operating voltage 24 V
Continuous stall current 3.9 A
Insulation protection class F
Brake power consumption 12 W
Motor constants 0.865 Nm/A
Nominal operating voltage DC 360 V
Motor nominal power 1000 W
DC nominal voltage 360 V
Motor nominal current 3.7 A
Typical rotor position sensor resolution 12 bit
Rotor position encoder, typical angular accuracy 20 arcmin
Rotor position encoder, sinusoidal/cosinusoidal periods per revolution 16
Phase-phase winding resistance 2.8 Ohm
Winding inductance phase-phase 7.43 mH
Type of winding switch Star inside
Peak current 15.6 A
Voltage constant, phase-to-phase 55 mVmin
Rating class according to EN 60034-1 S1
CE marking (see declaration of conformity) As per EU EMC directive As per EU low voltage directive
Corrosion resistance class (CRC) 0 - No corrosion stress
Storage temperature -20 °C ... 70 °C
Relative air humidity 0 - 90 %
Degree of protection IP21
Ambient temperature -10 °C ... 40 °C
Certification RCM compliance mark c UL us - Recognized (OL)
Total output inertia moment 2.2 kgcm²
Brake holding torque 4.5 Nm

12/22/20 - Subject to change - Festo AG & Co. KG

1/2

Page 2

Feature Value
Brake mass moment of inertia 0.222 kgcm²
Nominal torque 3.2 Nm
Peak torque 14 Nm
Stall torque 3.5 Nm
Permissible axial shaft load 72 N
Permissible radial shaft load 360 N
MTTF, subcomponent 797 years, holding brake
MTTFd, subcomponent 271 years, rotor position sensor
Switching cycles, holding brake 5 million idle actuations (without friction work!)
Product weight 4350 g
Electrical connection technology Plug
Note on materials Contains paint-wetting impairment substances RoHS-compliant
Conforms to standard IEC 60034

12/22/20 - Subject to change - Festo AG & Co. KG

2/2