EMME-AS-60-M-LS-AS FESTO
Document overview
- PDF pages: 2
Technical content
Page 1
Servo motor EMME-AS-60-M-LS-AS
Part number: 2089730

Data sheet
| Feature | Value |
| Number of pole pairs | 3 |
| Type code | EMME-AS |
| Rotor position sensor | Absolute encoder, single-turn |
| Rotor position sensor interface | HIPERFACE® |
| Rotor position sensor measuring principle | Capacitive |
| Max. rotational speed | 4925 1/min |
| Nominal rotary speed | 3000 1/min |
| Continuous stall current | 1.8 A |
| Insulation protection class | F |
| Motor constants | 0.8 Nm/A |
| Nominal operating voltage DC | 360 V |
| Motor nominal power | 380 W |
| DC nominal voltage | 360 V |
| Motor nominal current | 1.5 A |
| Typical rotor position sensor resolution | 12 bit |
| Rotor position encoder, typical angular accuracy | 20 arcmin |
| Rotor position encoder, sinusoidal/cosinusoidal periods per revolution | 16 |
| Phase-phase winding resistance | 9.8 Ohm |
| Winding inductance phase-phase | 16.8 mH |
| Type of winding switch | Star inside |
| Peak current | 7.2 A |
| Voltage constant, phase-to-phase | 51.7 mVmin |
| Rating class according to EN 60034-1 | S1 |
| CE marking (see declaration of conformity) | As per EU EMC directive As per EU low voltage directive |
| Corrosion resistance class (CRC) | 0 - No corrosion stress |
| Storage temperature | -20 °C ... 70 °C |
| Relative air humidity | 0 - 90 % |
| Degree of protection | IP21 |
| Ambient temperature | -10 °C ... 40 °C |
| Certification | RCM compliance mark c UL us - Recognized (OL) |
| Total output inertia moment | 0.413 kgcm² |
| Nominal torque | 1.2 Nm |
| Peak torque | 6 Nm |
| Stall torque | 1.5 Nm |
12/22/20 - Subject to change - Festo AG & Co. KG
1/2
Page 2
| Feature | Value |
| Permissible axial shaft load | 54 N |
| Permissible radial shaft load | 270 N |
| MTTFd, subcomponent | 340 years, rotor position sensor |
| Product weight | 1850 g |
| Electrical connection technology | Plug |
| Note on materials | Contains paint-wetting impairment substances RoHS-compliant |
| Conforms to standard | IEC 60034 |
12/22/20 - Subject to change - Festo AG & Co. KG
2/2