2016L030 LITTELFUSE

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 4

Technical content

Features

Applications

  • RoHS compliant and lead-free
  • Fast response to fault currents
  • High voltage
  • Low-profile
  • IEE1394 port protection
  • Powered ethernet port protection (IEEE 802.3 af)
  • Automotive electronic control module protection
  • Low voltage telecom equipment protection Agency Approvals AGENCY AGENCY FILE NUMBER E183209 R50082521

www.littelfuse.com ©2006 Littelfuse POLYFUSE® Resettable PTCs Surface Mount 2016L Series Specifications are subject to change without notice. Electronics Designers Guide Ambient Operation Temperature -40°C -20°C 0°C 23°C 40°C 50°C 60°C 70°C 85°C Part Number Hold Current (A) Temperature Rerating Temperature Rerating Curve Average Time Current Curves A: 2016L050 2016L100 2016L200 B: 2016L030 2016L100/33 2016L150 CURRENT IN AMPERES TIME IN SECONDS 0.001 0.010 0.100 100 1000 10000 100000 1 10 100 10000.20 0.160A 0.300A 1.00A 1.00A/33V 1.50A 2.00A 2016L Series Specifications are subject to change without notice. The average time current curves and temperature rerating curve performance is affected by a number or variables, and these curves provided as guidance only. Customer must verify the performance in their application.

www.littelfuse.com ©2006 Littelfuse POLYFUSE® Resettable PTCs Surface Mount 2016L Series Specifications are subject to change without notice. Electronics Designers Guide Environmental Specifications Soldering Parameters Condition Reflow Peak Temp/ Duration Time 260°C / 10 Sec Time above liquids (TAL) 220°C 60 Sec ~ 100 Sec Preheat 120°C~ 180°C 50 Sec ~ 150 Sec Storage Condition 0°C~35°C, <=70%RH

  • Recommended reflow methods: IR, vapor phase oven, hot air oven, N2 environment for lead-free
  • Devices are not designed to be wave soldered to the bottom side of the board.
  • Recommended maximum paste thickness is 0.25mm (0.010 inch)
  • Devices can be cleaned using standard industry methods and solvents. Note: If reflow temperatures exceed the recommended profile, devices may not meet the performance requirements. Operating/Storage Temperature -40°C to +85°C Maximum Device Surface Temperature in Tripped State 125°C Passive Aging +85°C, 1000 hours ±5% typical resistance change Humidity Aging +85°C, 85%R.H. 1000 hours ±5% typical resistance change Thermal Shock MIL-STD-202 Method 107G +85°C/-40°C 20 times -30% typical resistance change Solvent Resistance MIL-STD-202, Method 215 No change Vibration MIL-STD-883C, Method 2007.1, Condition A No change Physical Specifications Terminal Material Solder-Plated Copper (Solder Material: Matte Tin(Sn)) Lead Solderability Meets EIA Specification RS186-9E, ANSI/ J-STD-002 Category 3. Preheating 120 180 220 260 60 to 100 Temperature (°C) Soldering Cooling 12050 to 150 Time(s)

www.littelfuse.com ©2006 Littelfuse POLYFUSE® Resettable PTCs Surface Mount 2016L Series Specifications are subject to change without notice. Electronics Designers Guide Part Numbering System PACKAGING STYLE SIZE L: LITTELFUSE SURFACE MOUNT PPTC I HOLD CURRENT CODE (SEE TABLE BELOW) /XX: SPECIAL VOLTAGE RATING (NOT APPLICABLE TO ALL PARTS) QUANTITY CODE: D=1500 M=1000 P=2000 R: Tape & Reel

2016 L 100 /33 D R

Dimensions (mm) C Top View Pad Layout Side View Bottom View 4.60 mm (.181”) 3.40 mm (.133”) 1.50 mm (.059”) D MARKING CODE V ARIES WITH AMPERAGE AND VOL TAGE RATING (SEE CHAR T) SHOWN ARE: - 1.0A/15V RA TING (LEFT) - 1.0A/33V RA TING (RIGHT) E A B100 100 100 -33 Part Number A B C D E Inches mm Inches mm Inches mm Inches mm Inches mm I hold (A) I hold Code Voltage Option Packaging Option Quantity Quantity & Packaging Codes 0.30 030 Tape and Reel 1500 DR 0.55 050 Tape and Reel 1000 MR 1.10 100 Tape and Reel 2000 PR /33 Tape and Reel 1500 DR 1.50 150 Tape and Reel 1500 DR 2.00 200 Tape and Reel 2000 PR