2003

2003 ALLEGRO

Document overview

• Manufacturer or author: Provided By www.digicamel.com(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

2003 THRU

x = digit to identify specific device. Characteristic shown applies to family of devices with remaining digits as shown. See matrix on next page. Data Sheet 29304F Ideally suited for interfacing between low-level logic circuitry and multiple peripheral power loads, the Series ULN20xxA/L high-voltage, high-current Darlington arrays feature continuous load current ratings to 500 mA for each of the seven drivers. At an appropriate duty cycle depending on ambient temperature and number of drivers turned ON simultaneously, typical power loads totaling over 230 W (350 mA x 7, 95 V) can be controlled. Typical loads include relays, solenoids, stepping motors, magnetic print hammers, multiplexed LED and incandescent displays, and heaters. All devices feature open-collector outputs with integral clamp diodes. The ULN2003A/L and ULN2023A/L have series input resistors selected for operation directly with 5 V TTL or CMOS. These devices will handle numerous interface needs — particularly those beyond the capabilities of standard logic buffers. The ULN2004A/L and ULN2024A/L have series input resistors for operation directly from 6 to 15 V CMOS or PMOS logic outputs. The ULN2003A/L and ULN2004A/L are the standard Darlington arrays. The outputs are capable of sinking 500 mA and will withstand at least 50 V in the OFF state. Outputs may be paralleled for higher load current capability. The ULN2023A/L and ULN2024A/L will withstand 95 V in the OFF state. These Darlington arrays are furnished in 16-pin dual in-line plastic packages (suffix “A”) and 16-lead surface-mountable SOICs (suffix “L”). All devices are pinned with outputs opposite inputs to facilitate ease of circuit board layout. All devices are rated for operation over the temperature range of -20°C to +85°C. Most (see matrix, next page) are also available for operation to -40°C; to order, change the prefix from “ULN” to “ULQ”.

FEATURES

I TTL, DTL, PMOS, or CMOS-Compatible Inputs I Output Current to 500 mA I Output Voltage to 95 V I Transient-Protected Outputs I Dual In-Line Plastic Package or Small-Outline IC Package HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS Dwg. No. A-9594 61 1 71 0 Note that the ULN20xxA series (dual in-line package) and ULN20xxL series (small-outline IC package) are electrically identical and share a common terminal number assignment. ABSOLUTE MAXIMUM RATINGS Output Voltage, VCE Continuous Output Current, Power Dissipation, PD Operating Temperature Range, Storage Temperature Range,

2003 THRU 2024

HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS

115 Northeast Cutoff, Box 15036

Worcester, Massachusetts 01615-0036 (508) 853-5000 VCE(MAX) 50 V 95 V IC(MAX) 500 mA500 mA Logic Part Number 5V ULN2003A* ULN2023A* TTL, CMOS ULN2003L* ULN2023L 6-15 V ULN2004A* ULN2024A CMOS, PMOS ULN2004L* ULN2024L *Also available for operation between -40 °C and +85°C. To order, change prefix from “ULN” to “ULQ”. Dwg. No. A-9651 COM 7.2K 3K 2.7K X = Digit to identify specific device. Specification shown applies to family of devices with remaining digits as shown. See matrix above. Copyright © 1974, 1998 Allegro MicroSystems, Inc. Dwg. No. A-9898A ULN20x4A/L (Each Driver) COM 7.2K 3K 10.5K 50 75 100 125 150 2.5 0.5 ALLOWABLE PACKAGE POWER DISSIPATION IN WATTSAMBIENT TEMPERATURE IN °C 2.0 1.5 1.0 SUFFIX 'L', R = 90°C/WθJA Dwg. GP-006A SUFFIX 'A', R = 60°C/WθJA ULN20x3A/L (Each Driver) DEVICE PART NUMBER DESIGNATION PARTIAL SCHEMATICS

HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS www.allegromicro.com Test Applicable Limits Characteristic Symbol Fig. Devices Test Conditions Min. Typ. Max. Units Output Leakage Current I CEX 1AA ll V CE = 50 V, TA = 25°C — < 1 50 µA VCE = 50 V, TA = 70°C — < 1 100 µA 1B ULN2004A/L V CE = 50 V, TA = 70°C, VIN = 1.0 V — < 5 500 µA Collector-Emitter V CE(SAT) 2Al l I C = 100 mA, IB = 250 µA— 0.9 1.1 V Saturation Voltage lC = 200 mA, IB = 350 µA— 1.1 1.3 V IC = 350 mA, IB = 500 µA— 1.3 1.6 V Input Current I IN(ON) 3 ULN2003A/L V IN = 3.85 V — 0.93 1.35 mA ULN2004A/L V IN = 5.0 V — 0.35 0.5 mA VIN = 12 V — 1.0 1.45 mA IIN(OFF) 4Al l l C = 500 µA, TA = 70°C5 0 6 5 — µA Input Voltage V IN(ON) 5 ULN2003A/L V CE = 2.0 V, lC = 200 mA— — 2.4 V VCE = 2.0 V, IC = 250 mA— — 2.7 V VCE = 2.0 V, lC = 300 mA— — 3.0 V ULN2004A/L V CE = 2.0 V, lC = 125 mA— — 5.0 V VCE = 2.0 V, lC = 200 mA— — 6.0 V VCE = 2.0 V, IC = 275 mA— — 7.0 V VCE = 2.0 V, lC = 350 mA— — 8.0 V Input Capacitance C IN —Al l — 1 5 2 5 p F Turn-On Delay t PLH 8 All 0.5 E IN to 0.5 EOUT — 0.25 1.0 µs Turn-Off Delay t PHL 8 All 0.5 E IN to 0.5 EOUT — 0.25 1.0 µs Clamp Diode I R 6Al l V R = 50 V, TA = 25°C— — 5 0 µA Leakage Current VR = 50 V, TA = 70°C — — 100 µA Clamp Diode V F 7Al l I F = 350 mA— 1.7 2.0 V Forward Voltage Complete part number includes suffix to identify package style: A = DIP, L = SOIC. Types ULN2003A, ULN2003L, ULN2004A, and ULN2004L ELECTRICAL CHARACTERISTICS at +25°C (unless otherwise noted).

HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS Worcester, Massachusetts 01615-0036 (508) 853-5000 Test Applicable Limits Characteristic Symbol Fig. Devices Test Conditions Min. Typ. Max. Units Output Leakage Current I CEX 1AA ll V CE = 95 V, TA = 25°C — < 1 50 µA VCE = 95 V, TA = 70°C — < 1 100 µA 1B ULN2024A/L V CE = 95 V, TA = 70°C, VIN = 1.0 V — < 5 500 µA Collector-Emitter V CE(SAT) 2Al l I C = 100 mA, IB = 250 µA— 0.9 1.1 V Saturation Voltage lC = 200 mA, IB = 350 µA— 1.1 1.3 V IC = 350 mA, IB = 500 µA— 1.3 1.6 V Input Current I IN(ON) 3 ULN2023A/L V IN = 3.85 V — 0.93 1.35 mA ULN2024A/L V IN = 5.0 V — 0.35 0.5 mA VIN = 12 V — 1.0 1.45 mA IIN(OFF) 4Al l l C = 500 µA, TA = 70°C5 0 6 5 — µA Input Voltage V IN(ON) 5 ULN2023A/L V CE = 2.0 V, lC = 200 mA— — 2.4 V VCE = 2.0 V, IC = 250 mA— — 2.7 V VCE = 2.0 V, lC = 300 mA— — 3.0 V ULN2024A/L V CE = 2.0 V, lC = 125 mA— — 5.0 V VCE = 2.0 V, lC = 200 mA— — 6.0 V VCE = 2.0 V, IC = 275 mA— — 7.0 V VCE = 2.0 V, lC = 350 mA— — 8.0 V Input Capacitance C IN —Al l — 1 5 2 5 p F Turn-On Delay t PLH 8 All 0.5 E IN to 0.5 EOUT — 0.25 1.0 µs Turn-Off Delay t PHL 8 All 0.5 E IN to 0.5 EOUT — 0.25 1.0 µs Clamp Diode I R 6Al l V R = 95 V, TA = 25°C— — 5 0 µA Leakage Current VR = 95 V, TA = 70°C — — 100 µA Clamp Diode V F 7Al l I F = 350 mA— 1.7 2.0 V Forward Voltage Complete part number includes suffix to identify package style: A = DIP, L = SOIC. Types ULN2023A, ULN2023L, ULN2024A, and ULN2024L ELECTRICAL CHARACTERISTICS at +25°C (unless otherwise noted).

HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS www.allegromicro.com OPEN OPEN VCE ICEX µA VIN OPEN VCE ICEX µA IB OPEN hFE = VCE V IC IB IC VIN OPEN mA OPEN IIN OPEN VCE IC µA IIN µA V OPEN VCE V VIN IC OPEN VR IR µA IF OPEN VF V 50%50% 50%50% t pHL t pHLOUTPUT INPUT VIN PULSE GENERATOR PRR = 10KHz DC = 50% INPUT 93 Ω 50 pF OUT 30 Ω 100 Ω +50 V FIGURE 6 FIGURE 7 FIGURE 8 Dwg. No. A-9735A Dwg. No. A-9736A Vin ULN20X3* 3.5 V ULN20X4* 12 V TEST FIGURES FIGURE 1A FIGURE 1B FIGURE 2 FIGURE 3 FIGURE 4 FIGURE 5 * Complete part number includes a final letter to indicate package. X = Digit to identify specific device. Specification shown applies to family of devices with remaining digits as shown.

HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS Worcester, Massachusetts 01615-0036 (508) 853-5000 TYPICAL APPLICATIONS Dwg. No. A-9652 Dwg. No. A-9654A +VSS PMOS OUTPUT +V+V 61 1 71 0 200 Ω CMOS OUTPUT 61 1 71 0 +VDD 200 Ω 2N4901 0.5 Dwg. GP-067 1.0 2.01.5 COLLECTOR-EMITTER SATURATION VOLTAGE 600 400 COLLECTOR CURRENT IN mA 200 TYPICAL MAX. S ATURATIO N VOLTAGE ALLOWABLE COLLECTOR CURRENT AS A FUNCTION OF DUTY CYCLE (Dual In-line-Packaged Devices, Suffix ‘A’) 200 Dwg. GP-068 400 600 INPUT CURRENT IN µA 600 400 COLLECTOR CURRENT IN mA 200 MAX. R EQ'D IN PUT CURRENT TYPICAL COLLECTOR CURRENT AS A FUNCTION OF INPUT CURRENT SATURATION VOLTAGE AS A FUNCTION OF COLLECTOR CURRENT Dwg. GP-070 40 100 80 DUTY CYCLE IN PER CENT 600 400 OUTPUT CURRENT IN mA/CHANNEL 200 NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY TA = +70°C RθJA = 60°C/W Dwg. GP-044A 40 100 80 DUTY CYCLE IN PER CENT 600 400 OUTPUT CURRENT IN mA/CHANNEL 200 NUMBER OF OUTPUTS CONDUCTING SIMULTANEOUSLY TA = +70°C RθJA = 90°C/W (Small-Outline-Packaged Devices, Suffix ‘L’)

HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS www.allegromicro.com TYPICAL APPLICATIONS INPUT CURRENT AS A FUNCTION OF INPUT VOLTAGE Types ULN2004A, ULN2004L, ULN2024A, and ULN2024L 61 1 71 0 Dwg. No. A-9653A +V+VCC TTL OUTPUT 61 1 71 0 Dwg. No. A-10,175 +V+VCC TTL OUTPUT RP Types ULN2003A, ULN2003L, ULN2023A, and ULN2023L 3.0 Dwg. GP-069 5.0 6.0 INPUT VOLTAGE 2.0 2.5 2.0 INPUT CURRENT IN mA — I IN 1.0 MAXIMUM 0.5 1.5 4.0 AREA OF NORMAL OPERATION WITH STANDARD OR SCHOTTKY TTL TYPICAL Dwg. GP-069-1 10 12 INPUT VOLTAGE 2.0 INPUT CURRENT IN mA — IIN 1.0 MAXIMUM 0.5 1.5 TYPICAL 79 1 1

HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS Worcester, Massachusetts 01615-0036 (508) 853-5000 PACKAGE DESIGNATOR “A” Dimensions in Inches (controlling dimensions) Dimension in Millimeters (for reference only) NOTES: 1. Leads 1, 8, 9, and 16 may be half leads at vendor’s option. 2. Lead thickness is measured at seating plane or below. 3. Lead spacing tolerance is non-cumulative. 4. Exact body and lead configuration at vendor’s option within limits shown. 0.355 0.204 7.62 BSC Dwg. MA-001-16A mm 10.92 MAX 1 8 7.11 6.10 5.33 MAX 1.77 1.15 0.39 MIN 0.558 0.356 2.54 BSC 0.13 MIN 3.81 2.93 19.68 18.67 0.014 0.008 0.300 BSC Dwg. MA-001-16A in 0.430 MAX 1 8 0.280 0.240 0.210 MAX 0.070 0.045 0.015 MIN 0.022 0.014 0.100 BSC 0.005 MIN 0.150 0.115 0.775 0.735

HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS www.allegromicro.com PACKAGE DESIGNATOR “L” Dimensions in Inches (for reference only) Dimension in Millimeters (controlling dimensions) NOTES: 1. Lead spacing tolerance is non-cumulative. 2. Exact body and lead configuration at vendor’s option within limits shown. 0° TO 8°10.0 9.80 6.20 5.80 1.27 0.40 Dwg. MA-007-16A mm 1.27 BSC 0.25 0.191 2 3 4.00 3.80 0.51 0.33 1.75 1.35 0.10 MIN. 16 9 0° TO 8°0.3937 0.3859 0.2440 0.2284 0.050 0.016 Dwg. MA-007-16 in 0.050 BSC 0.0098 0.00751 2 3 0.1574 0.1497 0.020 0.013 0.0688 0.0532 0.0040 MIN. 16 9

HIGH-VOLTAGE, HIGH-CURRENT DARLINGTON ARRAYS Worcester, Massachusetts 01615-0036 (508) 853-5000 The products described here are manufactured under one or more Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the information being relied upon is current. Allegro products are not authorized for use as critical components in life-support devices or systems without express written approval. The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsi- bility for its use; nor for any infringement of patents or other rights of third parties which may result from its use.