HFE80V-200 KG
Document overview
- PDF pages: 5
Technical content
Page 1
HIGH VOLTAGE DC RELAY
- 200A, 250Vdc - 1 Form A Relay
- 4kVac dielectric strength between coil and contacts
- Different control coil voltages: 12, 24Vdc
- Outline Dimensions: (54x29.6x88) mm
- Dimensions with flanges: (88x47.4x88) mm
- Screw load terminals
- Mounting flanges reinforced with compression sleeves
- RoHS compliant materials and processes
Contact Data
Rated Load
200A
Contact form
1 Form A
Contact material
Cu Alloy
Contact resistance\*
≤1mΩ (@ 20A)
Max. switching voltage
250Vdc
Max. switching current
400A
Operate time
≤ 30ms
Release time
≤ 10ms
Bounce time
≤ 5ms 10,000 cycles ‡
Electrical endurance Mechanical endurance
200,000 cycles
Coil power consumption
6W
HFE80V-200
Characteristics
Insulation resistance 1,000MΩ (at 500 Vdc) Dielectric strength: Coil to contact
4kVac for 1 min
Across open contacts 3kVac for 1 min Dielectric creepage Ambient temperature -40°C to +85°C Ambient humidity
5% - 85% RH 1.5 mm (DA) 10Hz to 500Hz †
Vibration Shock resistance:
196 m/s2 §
Functional
490 m/s2 \*\*
Destructive Termination: Coil termination
Connector
Load termination
Screw Terminal
Unit weight
Approximately 370g
\* Typical value for Initial Contact Resistance: Using a sample quantity of at least 20 units, take the average value from 5 continuous A measurements from each sample
† Sinusoidal vibration, 1.5 mm double amplitude ,10 Hz to 500 Hz, acceleration 49 m/s2, 8 hours each for both directions on of three mutually perpendicular axes, 4 hours each for the energized and non-energized status, total 24 hours. There shall not be any abnormalities on relay appearance, construction and performance
‡ Rating at: 200Vdc / 40A. Duty Cycle: On: 0.6s, Off: 5.4s
§ Duration 11ms, 500 ops for each direction of three mutually perpendicular axes, 250 ops each for the energized and nonenergized status, total 3000 shocks. The opening time for close contacts or the closing time for open contacts should not exceed 10μs
\*\* Duration 6 ms, 50 shocks for each direction of three mutually perpendicular axes, total 300 shocks. There shall not be any abnormalities on relay appearance, construction and performance
Page 2
Current Endurance††
Current
Duration
200A
Continuous
300A
5 min
400A
30 s
800A
10 s
1600A
1 s
†† Testing Conditions: 1V, 85°C, Diameter of cable used: 60 mm2
Electrical Endurance‡‡
Contact Rating
Operations
Making Current Inrush 400A, RC =1ms, Steady 200A, 10Vdc, Breaking Current 0A
75,000 ops
Making Current 40A, Breaking Current 40A, 200Vdc
10,000 ops
Making Current 100A, Breaking Current 100A, 200Vdc
5,000 ops
Making Current 150A, Breaking Current 150A, 200Vdc
1,500 ops
Making Current 200A, Breaking Current 200A, 200Vdc
500 ops
Breaking Current 200A, 150Vdc, Making Current 0A
3,000 ops
Breaking Current 400A, 200Vdc, Making Current 0A
50 ops
‡‡ 23oC room temperature, Duty Cycle 0.6s ON/ 5.4s OFF, Diameter of cable used: 60 mm2
Coil Resistance (Ω±10%) at 23°C
Nominal Coil Voltage
Pick-up Voltage
Drop-out Voltage
Coil Resistance
12Vdc
≤9Vdc
≥1Vdc
24Ω
24Vdc
≤18Vdc
≥2Vdc
96Ω
Ordering Information
A
Page 3
Dimensional Drawings
(Unit: mm)
VERTICAL FIXING: HFE80V-200/XXX-XX-HTC5 (XXX)
HORIZONTAL FIXING: HFE80V-200/XXX-XX-HTC5Y (XXX)
A
Page 4
Wiring Diagrams
Single Coil
- Coil and load terminals are polarity independent
Connector Manufacturer: Tianhai, Part number: 0435 §§
A
§§ Connectors are optional parts
Page 5
Application Notes
- To maintain the relay in its closed state, the coil voltage should reach the stated pick-up voltage. 2. For definitions of terms used in this data sheet, see glossary at www.kgtechnologies.net.
Disclaimer: This data sheet is for reference only. All specifications are subject to change without prior notice. KG Technologies, Inc. cannot predict every possible application for our relays. While we do our best to make our relays as versatile as possible, we highly recommend contacting our engineering team if you have any questions. KG Technologies, Inc. is not responsible for malfunctioning relays when operated outside the specified parameters given in this data sheet.
A