2-1393222-9 MACOM

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 2

Technical content

Features

  • High sensitivity – nominal coil power requirement is as low as 212mW.
  • Low profile, .591 in. (15mm) tall case uses only .465 in 2 (3cm2) of area on the printed circuit board, permitting high density circuit design.
  • Power switching capability – contacts rated 10 amps in 1 Form A (SPST-NO) or 1 Form C (SPDT) arrangements.
  • Designed to meet UL, CSA, VDE, SEMKO and SEV requirements.
  • Designed to meet VDE 8mm spacing, 4kV dielectric, coil to contacts.
  • Designed to meet 3 mm creepage between contacts.
  • Conforms to: VDE 0110 – Insulation Group C (250V) VDE 435 Part 201 – High current applications VDE 0804 – Telecommunications equipment VDE 0631 – Temperature controllers and limiters VDE 0700 – Household appliances VDE 0805/5.90 – Office machines
  • Wash tight (washable).
  • Well suited for a broad range of applications e.g. HVAC, appliances, security and industrial control. Contact Ratings @ 25°C with relay properly vented. Remove vent nib after soldering and cleaning. Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Silver-cadmium oxide. Expected Mechanical Life: 10 million operations. Expected Electrical Life: 100,000 operations at 8 amps, 240VAC. 50,000 operations at 14 amps NO / 5 amps NC, 120VAC Res. 30,000 operations at 7.2 FLA, 45 LRA, 120VAC. 10,000 operations at 5 FLA, 30 LRA, 240VAC. 30,000 operations at B300 pilot duty (360VA, 240VAC; 470VA, 120VAC). Contact Ratings (See Figure 1): Maximum Switched Voltage: 380VAC. Maximum Switched Current: 14/5 (N.O./N.C.) amps, AC resistive; 8 amps DC (see Fig. 1) Maximum Switched Power: 200W, DC; 2,000VA, AC. Minimum Required Contact Load: 12V, 100mA. VDE Contact Ratings: 8 amps, 250VAC. UL Contact Ratings: 10 amps, 240VAC; 8 amps 24VDC; 1/3 HP, 120VAC; 1/2 HP, 240VAC. .1 1 10 10 0 100

200 W100 W

Switching Voltage (VDC) 200 300 25 W Switching Current (Amps DC) 50 W ENVIRONMENTAL DATA Temperature Range Storage: -40°C to +130°C. Operating: -40°C to +85°C. DC Must Nominal Nominal Resistance Operate Coil Voltage in Ohms Voltage Current ±10% (mA) 3 40 2.1 75.0 5 118 3.4 42.4 6 165 4.1 36.4 DC 9 365 6.1 24.7 Coils 12 650 8.2 18.5 18 1,455 12.3 12.4 24 2,270 16.3 10.6 36 5,460 24.5 6.4 48 8,790 32.6 5.5 60 15,265 40.8 3.9 Figure 1 - DC Switching Load Limit Curve Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/ laboratories and review them to ensure the product meets the requirements for a given application.

reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. P&B Catalog 1308242 Issued 3-03 (PDF Revised 8-06) *ON SINGLE THROW MODELS, ONLY NECESSARY TERMINALS ARE PRESENT. PC Board Layouts (Bottom Views) Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. T75S5D112-05 T75S5D112-12 T75S5D112-24Outline Dimensions Wiring Diagram (Bottom View) FORM A 1 .126 MAX. (28.6) FORM C 1 .181 MAX. (30) .394 (10) .591 (15) .150 (3.8) COIL TERMINALS: .024 (.61) DIA. REF.

1 Form C 1 Form A

.126 (3.2) .126 (3.2) .748 (19) .110 (2.8) .300 (7 .6) .051 DIA. TYP . (1 .3) .197 (5) .748 (19) .110 (2.8) .300 (7 .6) .051 DIA. TYP . (1 .3)

Ordering Information

Typical Part Number B T75 S 5 D 1 1 2 -12 1. Basic Series: T75 = Low profile, printed circuit board relay. 2. Enclosure: S = Wash tight (washable). 3. Contact Arrangement: 1 = 1 Form A (SPST-NO) 5 = 1 Form C (SPDT) 4. Coil Input: D = DC voltage 5. Coil Configuration: 1 = Single coil, non-latching (monostable) 6. Mounting and Terminals: 1 = Printed circuit terminals 7. Contact Material: 2 = Silver-cadmium oxide (AgCdO) 8. Coil Voltage: 03 = 3VDC 06 = 6VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC 05 = 5VDC 09 = 9VDC 18 = 18VDC 36 = 36VDC 60 = 60VDC NOTE: All part numbers are RoHS compliant.