1SS400_V01 ROHM
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 3
Technical content
www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. Switching Diode 1SS400 Applications Dimensions (Unit : mm) Land size figure (Unit : mm) High speed switching Features 1)Ultra small mold type. (EMD2) 2)High reliability Construction Silicon epitaxial planar Structure Absolute maximum ratings (Ta=25C) Symbol Unit VRM V VR V IFM mA Io mA Isurge mA Tj C Tstg C Electrical characteristics (Ta=25C) Symbol Min. Typ. Max. Unit Conditions Forward voltage VF - - 1.2 V IF=100mA Reverse current IR - - 0.1 μA VR=80V Ct - - 3 pF VR=0.5V , f=1MHz trr - - 4 ns VR=6V , IF=10mA , RL=100ΩReverse recovery time Taping dimensions (Unit : mm) Parameter Capacitance between terminals Junction temperature 125 Storage temperature 55 to 125 Average rectified forward current 100 Surge current(t=1s) 500 Reverse voltage (DC) 80 Forward voltage(repetitive peak) 225 Parameter Limits Reverse voltage (repetitive) 90 EMD2 0.8 1.7 0.6 0.95±0.06 4.0±0.1 3.5±0.05 1.75±0.1 8.0±0.15 0.2±0.05 0.76±0.05 1.26±0.05 φ0.5 0.6 2.0±0.05 1.3±0.06 2.45±0.1 空ポケット 0.2 Empty pocket ROHM : EMD2 JEITA : SC-79 JEDEC :SOD-523 dot (year week factory) 0.12±0.05 0.6±0.1 0.3±0.05 0.8±0.05 1.2±0.05 1.6±0.1 1/2 2015.04 - Rev.E
www.rohm.com © 2015 ROHM Co., Ltd. All rights reserved. Data Sheet 1SS400 100 1000 0.001 0.01 0.1 1 10 100 1000 Rth(j-a) Rth(j-c) 1ms IM=1mA IF=10mA 300us time Mounted on epoxy board 0.1 100 0.1 1 10 100 t Ifsm 0.1 100 1 10 100 8.3m Ifsm 1cyc 8.3m 8.3ms Ifsm 1cyc 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 100 900 910 920 930 940 950 0.1 0 5 10 15 0.1 100 1000 10000 100000 0 20 40 60 80 100 120 Ta=125℃ Ta=25℃ Ta=25℃ Ta=75℃ 0.01 0.1 100 Ta=25℃ Ta=125℃ Ta=75℃ Ta=25℃ FORWARD VOLTAGE : VF(V) VF-IF CHARACTERISTICS FORWARD CURRENT : IF(mA) REVERSE CURRENT : IR(nA) REVERSE VOLTAGE : VR(V) VR-IR CHARACTERISTICS CAPACITANCE BETWEEN TERMINALS:Ct(pF) REVERSE VOLTAGE : VR(V) VR-Ct CHARACTERISTICS VF DISPERSION MAP FORWARD VOLTAGE : VF(mV) REVERSE CURRENT : IR(nA) IR DISPERSION MAP CAPACITANCE BETWEEN TERMINALS:Ct(pF) Ct DISPERSION MAP IFSM DISPERSION MAP PEAK SURGE FORWARD CURRENT : IFSM(A) PEAK SURGE FORWARD CURRENT : IFSM(A) NUMBER OF CYCLES IFSM-CYCLE CHARACTERISTICS PEAK SURGE FORWARD CURRENT : IFSM(A) TIME:t(ms) IFSM-t CHARACTERISTICS TIME:t(s) Rth-t CHARACTERISTICS TRANSIENT THAERMAL IMPEDANCE:Rth (℃/W) trr DISPERSION MAP REVERSE RECOVERY TIME:trr(ns) ELECTROSTATIC DISCHARGE TEST ESD(KV) ESD DISPERSION MAP f=1MHz AVE:930.3mV Ta=25℃ IF=100mA n=30pcs Ta=25℃ VR=80V n=30pcs AVE:12.47nA AVE:0.698pF Ta=25℃ VR=0.5V f=1MHz n=10pcs AVE:4.05A AVE:1.20ns Ta=25℃ VR=6V IF=10mA RL=100Ω Irr=0.1*IR n=10pcs AVE:6.43kV C=100pF R=1.5kΩ C=200pF R=0Ω AVE:1.58kV 2/2 2015.04 - Rev.E
R1102Awww.rohm.com © 201 ROHM Co., Ltd. All rights reserved. Notice ROHM Customer Support System http://www.rohm.com/contact/ Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. Notes The information contained herein is subject to change without notice. Before you use our Products, please contact our sales representative and verify the latest specifica- tions : Although ROHM is continuously working to improve product reliability and quality, semicon- ductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communi- cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. The Products specified in this document are not designed to be radiation tolerant. For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. 10) 11) 12) 13) 14)