1SMA4728_07 LUGUANG

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 4

Technical content

10.0 A mps 1SMA4728 THRU 1SMA200A Case: T erminals: Plated leads, solderable per MIL-STD 750, method 2025 Polarity: Color band denotes cathode end Standard packaging: Weight: 0.002 ounce,0.07 gram FEATURE MECHANICAL DATA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS SYMBOLS UNITSVALUE Ratings at 25 C ambient temperature unless otherwise specified. MDD Catalog Number Peak Power Dissipation at TA=50O C, Derate above 50 OC (Note 1) PD 1.0 . 6 7 Watts mW/ OC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) (Note IFSM Operating and Storage Temperature Range TJ, TSTG -55 to + 150 O C Notes: 1. Mounted on 5.0mm2 (0.013mm thick) land areas. Measured on 8.3ms Single Half Sine-wave or Equivalent Square Wave, Duty Cycle=4 Pulses Per Minute Maximum. For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Typical IR less than 5.0/G4f4A above 1 High temperature soldering guaranteed: 2 6 0O C / 10 seconds at terminals Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Molded plastic over passivated junction 12mm tape (EIA-481) 1.0Watts Surface Mount Silicon Zener Diode h ttp://www.lgesemi .com mai l:lge@lgesemi.comRevision:20170701-P1

Nom. V Min. V Max. V O mA O mA uA V 1SMA4764 100 95.0 105 350 2.5 3000 0.25 76.0 SMA VZ @ IZT Part Number

1.0 Watt ZENER Diodes -- continued

ZZT @ IZT ZZK @ IZK Maximum Leakage Current IR @VR 1SMA110A 110 115.5 450 2.3 4000 0.25 83.6 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 1SMA120A 120 126 550 2.0 4500 0.25 91.25.0 1SMA160A 160 168 1100 1.6 6500 0.25 121.65.0 1SMA180A 180 189 1200 1.4 7000 0.25 136.85.0 1SMA200A 200 210 1500 1.2 8000 0.25 152.05.0 ELECTRICAL CHARACTERISTICS (TA=25O C unless otherwise noted) VF=1.2V max, IF=200mA for all types. 104.5 114 123.5 142.5 152 171 190 SMA SMA SMA SMA SMA SMA SMA SMA Notes : (1) The type number listed have a standard tolerance on the nominal zener voltage of ± 5%. (2) The revese surge current is a non-repetitive, 8.3ms pulse width square wave or equivalent sine-wave superimposed on IZT per JEDEC Method Notes : (1) The type number listed have a standard tolerance on the nominal zener voltage of ± 5%. (2) The revese surge current is a non-repetitive, 8.3ms pulse width square wave or equivalent sine-wave superimposed on IZT per JEDEC Method

FIG.1- POWER TEMPERATURE DERATING CURVE FIG.2- TYPICAL FORWARD CHARACTERISTICS FIG.3- EFFECT OF ZENER CURRENT ON ZENER IMPEDANCE FIG.5- TYPICAL LEAKAGE CURRENT FIG.4- EFFECT OF ZENER VOLTAGE ON ZENER IMPEDANCE P MAXIMUM POWER DISSIPATION (WATTS)D, IF, FORWARD CURRENT (mA) AMBIENT TEMPERA TURE( C) o V FOR WARD VOLTAGE (VOLTS)F, I,Z ZENER CURRENT (mA) I,Z ZENER CURRENT (mA) V,Z NOMINAL ZENER VOLTAGE (VOLTS) Z , DYNAMIC IMPEDANCE (OHMS)Z IR, LEAKAGE CURRENT ( A) Z , DYNAMIC IMPEDANCE (OHMS)Z 0 20 40 60 80 100 120 140 160 180 200 MINIMUM MAXIMUM 70 C o 150 C o 25 C o o 0.4 0.5 1.0 2.0 5.0 100 200 500 1000 T= 2 I (rms)= 0.1 I (dc) f = 1KHz J ZZ o 47V 27V 0.8V 0.1 0.25 0.50 0.75 1.0 1.25 0.2 0.5 1.0 2.0 5.0 10 20 50 100 1.0 2.0 5.0 100 200 500 1000 1.0 T= 2 I (rms)= 0.1 I (dc) f = 1KHz J ZZ o I = 1.0mAZ 5.0mA 20mA 2.0 3.0 5.0 7.0 10 20 30 50 70 100 1.0 2.0 5.0 7.0 100 200 500 700 1000 TYPICAL LEAKAGE CURRENT AT 80% OF NOMINAL BREAKDOWN VOLTAGE +125 C o +25 C o 3.0 4.0 0.001 0.002 0.005 0.007 0.01 0.02 0.05 0.07 0.1 0.2 0.5 0.7 1.0 2.0 5.0 7.0 100 200 500 700 1000 2000 5000 7000 10000 RATINGS AND CHARACTERISTIC CURVES( 1SMA472 THRU 1SMA200A) FIG.6- TYPICAL CAPACITANCE versus Vz FIG.7- TEMPERATURE COEFFICIENTS V , FORWARD VOLTAGE (VOLTS)Z V , ZENER VOLTAGE (VOLTS)Z C, CAP ACITANCE (pF) OV , TEMPERAYURE COEFFICIENT (mV/ C)Z o 0V BIAS 1.0V BIAS 50% OF BREAKDOWN BIAS 1.0 10 100 100 200 300 400 a-RANGE FOR UNITS TO 12 VOLTS V@ IZZ TRANGE -2.0 -4.0 +2.0 +4.0 +6.0 +8.0 +10 +12 1SMA4728 THRU 1SMA200A 1.0Watts Surface Mount Silicon Zener Diode http:/ /www.lgesemi .com mai l :lge@lgesemi.comRevision:20170701-P1

FIG.7- TEMPERA TURE COEFFICIENTS FIG.8- EFFECT OF ZENER CURRENT V , ZENER VOLTAGE (VOLTS)Z V , ZENER VOLTAGE (VOLTS)Z OV , TEMPERAYURE COEFFICIENT (mV/ C)Z o OV , TEMPERAYURE COEFFICIENT (mV/ C)Z o b-RANGE FOR UNITS 12 TO 100 VOLTS V@ IZZ T RANGE 10 20 30 50 70 100 1.0 2.0 3.0 5.0 7.0 100 V@ I ZZ T A o 20mA 0.01mA 1.0mA NOTE: BELOW

3 VOLTS AND ABOVE a VOLTS

CHANGES IN ZENER CURRENT OO NOT AFFECT TEMPERATURE COEFFICIENTS 3.0 4.0 5.0 6.0 7.0 8.0 -4.0 -2.0 +2.0 +4.0 +6.0 RATINGS AND CHARACTERISTIC CURVES( 1SMA472 THRU 1SMA200A) FIG.9- MAXIMUM SURGE POWER Ppk, PEAK SURGE POWER IWATTSO PW, PULSE WIDTH (ms) RECTANGULAR W AVEFORM TJ = 25 C PRIOR TO INITIAL PULSE o11V-91V NON-REPETITIVE 0.8V-10V NON-REPETITIVE 5% DUTY CYCLE 10% DUTY CYCLE 20% DUTY CYCLE 1.0 2.0 3.0 5.0 7.0 100 1.0Watts Surface Mount Silicon Zener Diode http:/ /www.lgesemi .com mai l :lge@lgesemi.comRevision:20170701-P1 PACKAGE SPQ/PCS CARTON SPQ/PCS CARTON SIZE/CM CARTON GW/KG CARTON NW/KG SMA 5000/REEL 80000 36X30.6X31 12.00 11.00 1SMA4728 THRU 1SMA200A