1N5817 MOTOROLA

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 6

Technical content

/C0065/C0120/C0105/C0097/C0108 /C0076/C0101/C0097/C0100 /C0082/C0101/C0099/C0116/C0105/C0102/C0105/C0101/C0114/C0115 . . . employing the Schottky Barrier principle in a large area metal–to–silicon power diode. State–of–the–art geometry features chrome barrier metal, epitaxial construction with oxide passivation and metal overlap contact. Ideally suited for use as rectifiers in low–voltage, high–frequency inverters, free wheeling diodes, and polarity protection diodes.

  • Extremely Low vF
  • Low Stored Charge, Majority Carrier Conduction
  • Low Power Loss/High Efficiency Mechanical Characteristics
  • Case: Epoxy, Molded
  • Weight: 0.4 gram (approximately)
  • Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
  • Lead and Mounting Surface Temperature for Soldering Purposes: 220°C Max. for 10 Seconds, 1/16″ from case
  • Shipped in plastic bags, 1000 per bag.
  • Available Tape and Reeled, 5000 per reel, by adding a “RL” suffix to the part number
  • Polarity: Cathode Indicated by Polarity Band
  • Marking: 1N5817, 1N5818, 1N5819 MAXIMUM RATINGS Rating Symbol 1N5817 1N5818 1N5819 Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 20 30 40 V Non–Repetitive Peak Reverse Voltage VRSM 24 36 48 V RMS Reverse Voltage VR(RMS) 14 21 28 V Average Rectified Forward Current (2) (VR(equiv) ≤ 0.2 VR (dc), TL = 90°C, R θJA = 80°C/W, P.C. Board Mounting, see Note 2, TA = 55°C) IO 1.0 A Ambient Temperature (Rated VR (dc), PF(AV) = 0, RθJA = 80°C/W) TA 85 80 75 °C Non–Repetitive Peak Surge Current (Surge applied at rated load conditions, half–wave, single phase 60 Hz, TL = 70°C) IFSM 25 (for one cycle) A Operating and Storage Junction Temperature Range (Reverse Voltage applied)TJ, Tstg –65 to +125 °C Peak Operating Junction Temperature (Forward Current applied) TJ(pk) 150 °C THERMAL CHARACTERISTICS (2) Characteristic Symbol Max Unit Thermal Resistance, Junction to Ambient R θJA 80 °C/W ELECTRICAL CHARACTERISTICS (TL = 25°C unless otherwise noted) (2) Characteristic Symbol 1N5817 1N5818 1N5819 Unit Maximum Instantaneous Forward Voltage (1) (iF = 0.1 A) (iF = 1.0 A) (iF = 3.0 A) vF 0.32 0.45 0.75 0.33 0.55 0.875 0.34 0.6 0.9 V Maximum Instantaneous Reverse Current @ Rated dc Voltage (1) (TL = 25°C) (TL = 100°C) IR 1.0 1.0 1.0 mA (1) Pulse Test: Pulse Width = 300 µs, Duty Cycle = 2.0%. (2) Lead Temperature reference is cathode lead 1/32″ from case. Preferred devices are Motorola recommended choices for future use and best overall value.  Motorola, Inc. 1996 Order this document by 1N5817/D /C0077/C0079/C0084/C0079/C0082/C0079/C0076/C0065 SEMICONDUCTOR TECHNICAL DATA /C0049/C0078/C0053/C0056/C0049/C0055 /C0049/C0078/C0053/C0056/C0049/C0056 /C0049/C0078/C0053/C0056/C0049/C0057 SCHOTTKY BARRIER RECTIFIERS

1 AMPERE

20, 30 and 40 VOLTS CASE 59–04 1N5817 and 1N5819 are Motorola Preferred Devices Rev 3

Figure 1. Maximum Reference Temperature Figure 2. Maximum Reference Temperature Figure 3. Maximum Reference Temperature *Note that VR(PK) ≈ 2.0 Vin(PK). †Use line to center tap voltage for Vin. Table 1. Values for Factor F

2 Rectifier Device Data

tifier circuits and the reverse characteristics of Schottky diodes. Step 4. Find TA(max) from equation (3).

4 Rectifier Device Data

Figure 7. Typical Forward Voltage Figure 8. Maximum Non–Repetitive Surge Current Figure 9. Typical Reverse Current

1 Cycle

R θJ = 36°C/W typically and 46°C/W maximum.

/C0049/C0078/C0053/C0056/C0049/C0055 /C0049/C0078/C0053/C0056/C0049/C0056 /C0049/C0078/C0053/C0056/C0049/C0057

6 Rectifier Device Data

CASE 59–04 K A DK B DIM MIN MAX MIN MAX INCHESMILLIMETERS A 5.97 6.60 0.235 0.260 B 2.79 3.05 0.110 0.120 D 0.76 0.86 0.030 0.034 NOTES: 1. ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO–41 OUTLINE SHALL APPLY. 2. POLARITY DENOTED BY CATHODE BAND. 3. LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION. Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, 6F Seibu–Butsuryu–Center, P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 81–3–3521–8315 INTERNET : http://Design–NET.com 51 Ting Kok R oad, Tai Po, N.T., Hong Kong. 852–26629298 1N5817/D◊