Download PDF1N5614 GE
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 2
Technical content
GLASS PASSIVATED MEDIUM-SWITCHING JUNCTION RECTIFIER Reverse Voltage- 200 to 1000 Volts Forward Current- 1.0. Ampere
FEATURES
♦ High temperature metallurgically bonded construction ♦ 1.0 Ampere operation at TA= 55°C with no thermal runaway ♦ Typical IR less than 0.1µA ♦ Hermetically sealed package ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375” (9.5mm) lead length, 5 lbs. (2.3kg) tension MECHANICAL DATA Case: JEDEC DO-204AP solid glass body Terminals:Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity:Color band denotes cathode end Mounting Position:Any Weight:0.02 ounce, 0.56 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS 1N5614 1N5616 1N5618 1N5620 1N5622 UNITS * Maximum repetitive peak reverse voltage V RRM 200 400 600 800 1000 Volts Maximum RMS voltage V RMS 140 280 420 560 700 Volts * Maximum DC blocking voltage V DC 200 400 600 800 1000 Volts * Minimum reverse breakdown voltage at 50µAV BR 220 440 660 880 1100 Volts Maximum average forward rectified current 0.375” (9.5mm) lead length at TA=55°C I(AV) 1.0 Amp * Peak forward surge current 8.3ms single half sine-wave superimposed I FSM 50.0 Amps on rated load (JEDEC Method) * Maximum instantaneous forward voltage at 1.0A V F 1.2 Volts * Maximum DC reverse current T A=25°C 0.5 at rated DC blocking voltage T A=100°CI R 25.0 µA TA=200°C 1500 * Maximum reverse recovery time (NOTE 1) trr 2.0 µs Maximum junction capacitance (NOTE 2) C J 45 35 25 20 15 pF Typical thermal resistance (NOTE 3) R Θ JA 55.0 °C/W * Operating junction temperature range T J -65 to +175 °C * Storage temperature range T STG -65 to +200 °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR =1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 12 Volts *JEDEC registered values4/98 DO-204AP 0.034 (0.86) 0.028 (0.71) DIA. 0.150 (3.8) 0.100 (2.5) DIA. 1.0 (25.4) MIN. 0.240 (6.1) MAX. 1.0 (25.4) MIN. Dimensions in inches and (millimeters) *Brazed-lead assembly is covered by Patent No. 3,930,306 PATENTED*
0.25 0.5 0.75 1.0 1 10 100 11 0 1 0 0 0.01 0.1 02 0 40 60 80 100 0.01 0.1 RATINGS AND CHARACTERISTIC CURVES 1N5614 THRU 1N5622 FIG. 1 - FORWARD CURRENT DERATING CURVE AMBIENT TEMPERATURE, °C AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 H Z PEAK FORWARD SURGE CURRENT, AMPERES FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF REVERSE VOLTAGE, VOLTS TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ= 25°C TJ=25°C PULSE WIDTH=300 µs 1% DUTY CYCLE TJ=25°C f=1.0 MHz Vsig=50mVp-p 60 HZ RESISTIVE OR INDUCTIVE LOAD 0.375" (9.5mm) LEAD LENGTH TJ=125°C PERCENT OF RATED PEAK REVERSE VOLTAGE, % TJ=75°C TJ=150°C