1N5615GP GE
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 2
Technical content
GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER Reverse Voltage -200 to 1000 Volts Forward Current -1.0 Ampere
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ Fast switching for high efficiency ♦ 1.0 Ampere operation at T A=55°C with no thermal runaway ♦ High temperature soldering guaranteed: 350°C/10seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension MECHANICAL DATA Case: JEDEC DO-204AC molded plastic over glass body Terminals:Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity:Color band denotes cathode end Mounting Position:Any Weight:0.015 ounce, 0.4 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. 1N 1N 1N 1N 1N SYMBOLS 5615GP 5617GP 5619GP 5621GP 5623GP UNITS * Maximum repetitive peak reverse voltage V RRM 200 400 600 800 1000 Volts * Maximum RMS voltage V RMS 140 280 420 560 700 Volts * Maximum DC blocking voltage V DC 200 400 600 800 1000 Amps * Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55°C I(AV) 1.0 Amp * Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) I FSM 50.0 Amps Maximum instantaneous forward voltage at 1.0A V F 1.2 Volts Maximum DC reverse current T A=25°C 0.5 at rated DC blocking voltage T A=100°C IR 25.0 µA *Maximum reverse recovery time (NOTE 1) trr 150 250 300 500 ns Typical junction capacitance(NOTE 2) C J 25.0 pF Typical thermal resistance(NOTE 3) R Θ JA 45.0 °C/W * Operating junction and storage temperature range TJ,TSTG -65 to +175 °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR =1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts * JEDEC registered values 0.034 (0.86) 0.028 (0.71) 0.140 (3.6) 0.104 (2.6) DIA. DIA. 1.0 MIN. (25.4) 0.230 (5.8) 0.300 (7.6) 1.0 MIN. (25.4) DO-204A C Dimensions in inches and (millimeters) *Glass-plastic encapsulation technique is covered by Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306 PATENTED*
0.25 0.5 0.75 1.0 0.01 0.1 1 10 100 1 10 100 100 0 20 40 60 80 100 0.01 0.1 0.01 0.1 1 10 100 0.1 100 RATINGS AND CHARACTERISTIC CURVES 1N5615GP THRU 1N5623GP AMBIENT TEMPERATURE, °C AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 H Z FORWARD SURGE CURRENT, AMPERES FIG. 3 - TYPICAL FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAM- PERES INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF REVERSE VOLTAGE, VOLTS TA=55°C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=125°C TJ=75°C TJ=25°C PULSE WIDTH=300 µs 1% DUTY CYCLE TJ=25°C f=1.0 MHZ Vsig=50mVp-p 0.375" (9.5mm) LEAD LENGTH FIG. 1 - FORWARD CURRENT DERATING CURVE TJ=25°C RESISTIVE OR INDUCTIVE LOAD FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE ( °C/W) t, PULSE DURATION, sec