1N5059GP GE
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 2
Technical content
GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage -200 to 800 Volts Forward Current -1.0 Ampere
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ 1.0 Ampere operation at T A=75°C with no thermal runaway ♦ Typical IR less than 0.1µA ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length at 5 lbs., (2.3kg) tension MECHANICAL DATA Case: JEDEC DO-204AC molded plastic over glass body Terminals:Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity:Color band denotes cathode end Mounting Position:Any Weight:0.015 ounce, 0.4 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS 1N5059GP 1N5060GP 1N5061GP 1N5062GP UNITS * Maximum repetitive peak reverse voltage V RRM 200 400 600 800 Volts Maximum RMS voltage V RMS 140 280 420 560 Volts * Maximum DC blocking voltage V DC 200 400 600 800 Volts * Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=75°C I(AV) 1.0 Amp * Peak forward surge current 8.3ms single half sine-wave superimposed I FSM 50.0 Amps on rated load (JEDEC Method) * Maximum instantaneous forward voltage at 1.0A, TA=75°C V F 1.2 Volts * Maximum full load reverse current, full cycle average 0.375" (9.5mm) lead length at TA=25°C I R(AV) 5.0 µA TA=75°C 150.0 * Maximum DC reverse current T A= 25°C 5.0 at rated DC blocking voltage T A=175°C IR 300.0 µA Typical reverse recovery time (NOTE 1)t rr 2.0 µs Typical junction capacitance (NOTE 2) C J 15.0 pF Typical thermal resistance (NOTE 3) R Θ JA 45.0 °C/WR Θ JL 20.0 Operating junction and storage temperature range TJ, TSTG -65 to +175 °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR =1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 VDC * JEDEC registered value 0.034 (0.86) 0.028 (0.71) 0.140 (3.6) 0.104 (2.6) DIA. DIA. 1.0 MIN. (25.4) 0.230 (5.8) 0.300 (7.6) 1.0 MIN. (25.4) DO-204A C Dimensions in inches and (millimeters) *Glass -plastic encapsulation technique is covered by Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306 PATENTED*
1.0 25 50 75 100 150 175 0.2 0.4 0.6 0.8 125 11 0 1 0 0 0.01 0.1 1.2 100101 0 2 04 06 08 0 1 0 0 0.01 0.1 0.01 0.1 1 10 100 0.1 100 RATINGS AND CHARACTERISTIC CURVES 1N5059GP THRU 1N5062GP FIG. 1 - FORWARD CURRENT DERATING CURVE AMBIENT TEMPERATURE, °C AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 H Z PEAK FORWARD SURGE CURRENT, AMPERES FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF REVERSE VOLTAGE, VOLTS TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=125°C TJ=100°C TJ=25°C TJ=25°C PULSE WIDTH=300 µs TJ=25°C f=1.0 MHZ Vsig=50mVp-p 0.375" (9.5mm) LEAD LENGTH 60 HZ RESISTIVE OR INDUCTIVE LOAD FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE ( °C/W) t, PULSE DURATION, sec