1N4383GP GE
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 2
Technical content
GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage -200 to 1000 Volts Forward Current - 1.0 Ampere
FEATURES
♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ 1.0 Ampere operation at T A=100°C with no thermal runaway ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension MECHANICAL DATA Case: JEDEC DO-204AC molded plastic over glass body Terminals:Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity:Color band denotes cathode end Mounting Position:Any Weight:0.015 ounce, 0.4 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. 1N 1N 1N 1N 1N SYMBOLS 4383GP 4384GP 4385GP 4585GP 4586GP UNITS * Maximum repetitive peak reverse voltage V RRM 200 400 600 800 1000 Volts * Maximum RMS voltage V RMS 140 280 420 560 700 Volts * Maximum DC blocking voltage V DC 200 400 600 800 1000 Volts * Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=100°C I(AV) 1.0 Amp * Peak forward surge current 8.3ms single half sine-wave superimposed I FSM 50.0 Amps on rated load (JEDEC Method) at TA=100°C Maximum instantaneous forward voltage at 1.0A V F 1.0 Volts Maximum DC reverse current T A=25°C 5.0 at rated DC blocking voltage T A=150°C IR 250.0 µA * Typical reverse recovery time(NOTE 1) trr 2.0 µs Maximum full load reverse current full cycle average at 0.375" (9.5mm) lead length at TA=100°C IR(AV) 275 250 225 200 200 µA Typical junction capacitance(NOTE 2) C J 15.0 pF Typical thermal resistance(NOTE 3) R Θ JA 45.0 °C/W * Operating junction and storage temperature range T J, TSTG -65 to +175 °C NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR =1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts * JEDEC registered values 0.034 (0.86) 0.028 (0.71) 0.140 (3.6) 0.104 (2.6) DIA. DIA. 1.0 MIN. (25.4) 0.230 (5.8) 0.300 (7.6) 1.0 MIN. (25.4) DO-204A C Dimensions in inches and (millimeters) *Glass-plastic encapsulation technique is covered by Patent No. 3,996,602 and brazed lead assembly by Patent No. 3,930,306 PATENTED*
25 50 75 100 125 150 175 200 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1 10 100 0.01 0.1 1.2 100 1 10 100 02 0 4 0 6 0 8 0 1 0 00.01 0.1 0.01 0.1 1 10 100 0.1 100 FIG. 1 - FORWARD CURRENT DERATING CURVE AMBIENT TEMPERATURE, °C AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60 H Z PEAK FORWARD SURGE CURRENT, AMPERES FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, AMPERES INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF REVERSE VOLTAGE, VOLTS TA=100°C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=75°C TJ=25°C TJ=25°C PULSE WIDTH=300 µs TJ=25°C f=1.0 MHZ Vsig=50mVp-p 0.375"(9.5mm) LEAD LENGTH TJ=125°C RATINGS AND CHARACTERISTIC CURVES 1N4383GP THRU 1N4385GP, 1N4585GP AND 1N4586GP 60 HZ RESISTIVE OR INDUCTIVE LOAD FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE ( °C/W) t, PULSE DURATION, sec