1N4007G-1 GULFSEMI
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 2
Technical content
VOLTAGE: 1000V CURRENT: 1.0A FEATURE DO – 41\\DO – 204AL Molded case feature for auto insertion High current capability Low leakage current High surge capability High temperature soldering guaranteed 250° C /10sec/0.375" lead length at 5 lbs tension Glass Passivated chip MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25° C, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL 1N4007G-1 units Maximum Recurrent Peak Reverse Voltage Vrrm 1000 V Maximum RMS Voltage Vrms 700 V Maximum DC blocking Voltage Vdc 1000 V Maximum Average Forward Rectified Current 3/8 " lead length at Ta =75 ° C If(av) 1.0 A Peak Forward Surge Current 8.3ms single Half sine-wave superimposed on rated load Ifsm 30.0 A Maximum Instantaneous Forward Voltage at rated forward current Vf 1.1 V Maximum full load reverse current full cycle at T L =75 ° C Ir(av) 30.0 µA Maximum DC Reverse Current Ta =25 ° C at rated DC blocking voltage Ta =100 ° C Ir 5.0 50.0 µA Reverse Recovery Time Range (Note 1) Trr 900 ～1300 nS Typical Junction Capacitance (Note 2) Cj 15 .0 pF Typical Thermal Resistance (Note 3) R(ja) 50.0 ° C /W Storage and Operation Junction Temperature Tstg, Tj -55 to +150 ° C Note: 1. Reverse Recovery Condition If = 0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 0.375" lead length, P.C. Board Mounted Rev.A1 www.gulfsemi.com
RATINGS AND CHARACTERISTIC CURVES 1N4007G-1 1 Rev.A1 www.gulfsemi.com