1N2163A NJSEMI
Document overview
- Manufacturer or author: Provided By digicamel.com
- PDF pages: 1
Technical content
New Seusey Semi: Conductor Products, Ine. NO Oe ’ 20 STERN AVE. , TELEPHONE: (201) 3 SPRINGFIELD, NEW JERSEY 07081 (212) 2 U.S.A. : FAX: (201) 3 MAXIMUM RATINGS Power Dissipation: 500 mW Power Derating: 4.6 mW/°C above 25°C Operating and Storage Temperatures: —65 to +185°C : ELECTRICAL CHARACTERISTICS @ 25°C unless otherwise indicated VOLTAGE MAXIMUM TEMPERATURE sevec ZENER STABILITY EFFECTIVE TYEE IMPEDANCE Note 3) TEMPERATURE weno Mate 2 wisn COEFFICIENT a A YZ a: elite | [dB 1N2163A 92-96 10 33 Oto + 70 005 1N2164 90-98 10 85 —55 to +125 005 1N2164A 92-96 10 85 =55 to +125 005 1N2165 90-98 10 113 —55 to +185 005 1N2165A 92-96 10 113 55 to +185 005 1N2166A 92-96 10 15 7 Oto + 70 001 1N2167 9.0-98 10 15 7 55 to 4125 001 1N2167A 92-96 10 15 7 55 to +125 001 1N2168 90-98 10 15 2B 55 to +185 | 001 1N2168A 92-96 10 15 23 =55 to +185 001 IN2169 30-98 10 ry Ot + 70 “0005 1N2169A 92-96 10 4 Oto + 70 0005 1N2170 90-98 10 9 55 to +125 0005 1N2170A 92-96 10 9 —55 to +125 0005 Inari aleli |; [ge] 2. 1N2171A 92-96 10 12 —55 to +185 0005 NOTE 1 The electrical characteristics are measured after allowing the device to stabilize for 90 seconds with 3% inch MIL spacing between test clips and case. Temperature coefficient is measured with the device in a circulating oil bath with a temperature tolerance of +1°C. NOTE 2 Measured by superimposing 0.1 mA ac rms on 10 mA DC @ 25°C. NOTE 3 The maximum allowable change observed over the entire range i.e., the change in diode voltage will not exceed the specified mV change between any two discrete temperatures over the specified temperature range. a} Ee arte Tae |
1 H "ANJEDEC nuns nds ph
« u |