MZP4739A MOTOROLA

Document overview

  • Manufacturer or author: Provided By digicamel.com
  • PDF pages: 4

Technical content

1.0 Watt Surmetic 30 764

Figure 1. Power-Temperature Derating Curve NoTEs: _JEDEC 0-41 OUTLINE SHALL APPLY. are given to facilitate “worst case” design. Designer's and Surmetic are trademarks of Motorola Inc. .

3 A = a a 8 A |

Figure 2. Typical Thermal Response L, Lead Length = 3/8 Inch

8 Eee Eee 3 2 006 =e ee

Figure 3. Maximum Surge Power Figure 4. Typical Reverse Leakage temperature under any set of operating conditions in order to power pulses (L = 3/8 inch) or from Figure 10 for de power. depends on the device mounting method. 0a Is generally Fiaires 6 and 6. thermocouple placed on the lead as close as possible to the tie as possible.

Figure 5. Units To 12 Volts Figure 6. Units 10 To 200 Volts Figure 7. Vz = 3.9 thru 10 Volts Figure 8. Vz = 12 thru 82 Volts

3 KA 5 = ||

MoToRCLA sc oropessorto “T= J[—JD He © Jp e3e7255 ocaoi01-s ELECTRICAL CHARACTERISTICS (Ta = 25°C unless otherwise noted) *VF = 1.5 V max, If = 200 mA for all types) *Nominal "Max Zener Impedance *Surge : Zener Voltage | _*Test (Note 3) Current Motorola Vz @ lzt Current @Tp = 26°C Type No. Volts lar 2zy @ lzt Ip VR ip- mA (Note 1) {Note 2) mA ‘Ohms wAMax @ Volts (Note 4) i.) MZP4728 33 76 10 400 1.0 100 1.0 1380 MzP4729 36 69 10 400 1.0 100 1.0 1260 MzP4730 39 64 9.0 400 1.0 50 1.0 1190 MzP4731 43 58 9.0 400 1.0 10 1.0 1070 MzP4732 47 53 8.0 500 1.0 10 1.0 970 MzP4733 51 49 7.0 860 1.0 10 1.0 890 , MzP4734 56 45 5.0 600 10 10 2.0 810 MzP4735 62 4 2.0 700 10 10 3.0 730 MzP4736 68 37 35 700 1.0 10 40 660 zp4737 75 34 4.0 700 05 10 5.0 605 MZP4738 82 45 700 05 10 6.0 560 MzP4739 91 5.0 700 06 10 7.0 500 MzP4740 10 7.0 700 0.25 10 76 454 MzP4741 n 8.0 700 0.25 5.0 84 414 MzP4742 2 9.0 700 0.25 5.0 91 380 MzP4743 13 19 10 700 0.25 5.0 99 344 MzP4744 5 7 4 700 0.25 5.0 114 304 Mzp4745 16 155 16 700 0.25 5.0 12.2 285 MzP4746 18 14 20 750 0.25 5.0 13.7 250 MZP4747 20 12.5 22 780 0.25 5.0 15.2 225 MzP4748 115 23 750 0.25 5.0 16.7 208 MzP4749 105 28 750 0.25 5.0 18.2 190 MzP4750 95 35 750 0.25 5.0 20.6 170 MzP4751 85 40 1000 0.25 5.0 22.8 150 MzP4752 75 45 1000 0.25 5.0 26.1 135 MzP4753 36 7.0 60 7000 0.25 5.0 27.4 125 MzP4754 39 65 60 1000 0.25 5.0 29.7 115 MZP4755 43 6.0 70 1500 0.25 5.0 32.7 110 MzP4756 47 55 80 1500 0.25 5.0 35.8 95 MZP4767 81 5.0 95 1500 0.25 5.0 38.8 90 MzP4768 86 45 110 2000 0.25 5.0 42.8 80 Mzp4769 62 40 126 2000 0.25 5.0 47.41 70 MzP4760 68 37 150 2000 0.25 5.0 517 65 MzP4761 75 33 175 2000 0.25 5.0 586 60 MzP4762 82 3.0 200 3000 0.25 5.0 62.2 55 MZP4763 91 28 250 3000 0.25 5.0 69.2 MzP4764 100 25 350 3000 0.25 5.0 76 4M110ZS10 110 23 450 4000 0.25 5.0 83.6 1M120ZS10 120 2.0 550 4500 0.25 5.0 91.2 4M130ZS10 130 19 700 5000 0.25 5.0 98.8 1M150ZS10 150 17 1000 6000 0.25 5.0 114 1M160ZS10 160 1.6 1100 6500 0.25 5.0 121.6 1M180ZS10 180 1.4 1200 7000 0.25 5.0 136.8 4M200ZS10 200 12 1500 8000 0.25 5.0 152 NOTE 1 — TOLERANCE AND TYPE NUMBER DESIGNATION NOTE 3 — ZENER IMPEDANCE (2) DERIVATION The type numbers listed have a standard tolerance on the nominal zener The zener impedance is derived from the 60 cycle ac voltage, which voltage of 10%. A standard tolerance of 5% Is indicated by adding _results when an ac current having an rms value equsl to 10% of the de an, aut to the M2P type numbers. A "auf, would incato@ zener current (iz¢ or Izk) is superimposed on Izt oF I2K- : “2% tolerance and a “D” suffix would indicate a + 1% tolerance. a Fa eae ane ee IM type mombers is indicated by the digits fol- NOTE 4 — SURGE CURRENT (i,) NON-REPETITIVE , lowing ZS inthe part number. 10 indicates 10%, 8 indicates 5%, 2 indicates The rating listed in the electrical characteristics table is maximum peak, bah) da i mil 7 " non-repstitive, reverse surge current of 1/2 square wave or equivalent 7 sine wave pulse of 1/120 second duration superimposed on the test cur- NOTE 2 — ZENER VOLTAGE (Vz) MEASUREMENT rent, IzT, per JEDEC registration, however, actual device capability is as Motorola guarantees the zener voltage when measured at 90 seconds described in Figure 3. we maayainiog the lead temperature (TL) at 30°C + 1°C, 3/8" fromthe ——singicates JEDEC Registered Data for the 1N4728 Series Motorola reserves the right to make changes without further notice to any products herein to improve reliability, function or design. Motorola does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights nor the rights of others. Motorola products are not authorized for use as components in life support devices or systems intended for surgical implant into the body or intended to support or sustain life. Buyer agrees to notify Motorola of any such intended end use whereupon Motorola shall determine availability and suitability of its product or products for the use intended. Motorola and ® are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Employment Opportunity/Affirmative Action Employer. Literature Distribution Centers: USA: Motorola Literature Distribution; P.0. Box 20912; Phoenix, Arizona 85036. ) EUROPE: Motorola Ltd.; European Literature Center; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. \\ : JAPAN: Nippon Motorola Ltd.; 3-20-1 Minamiazabu, Minato-ku, Tokyo 106 Japan. 4 zP4728 THRU MZP4764 fist rion mea $49 MEAL LEM cio I34m0 TEAL 4M110ZS10 THRU 1M200ZS10