18K2A244

6STD25SAR99E20X CONEC

Document overview

• Manufacturer or author: Provided By www.digicamel.com(free datasheet download site)
• PDF pages: 8

Technical content

( 5 : 1 ) AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD EE EE EE EE FF FF FF FF AA AA AA AA BB BB BB BB CC CC CC CC DD DD DD DD 6STD09SAR99E20X CONEC ABC dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 18K2A244 D-SUB FEMALE SEE NOTES Lehmenkühler29.01.04

29.01.04 Mickenbecker

9pos. SOLDER PIN STRAIGHT with threaded spacer clip and hexlocking screw 2:1 (5:1) 6STD09SAR99E20X a Original 5 x b Ä4141 26.10.2011 K.H. SEE NOTE 13 Directive 2002/95/EC RoHS compliant O-RING SEE NOTE 7 SEALING COMPOUND AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 240 ° C FOR 5 SEC. AND SOLDER PREHEAT 120° C FOR 120 SEC.) 2. METALSHELLS: COPPER ALLOY; min. 315µin TIN ove r 40-80µin NICKEL 3. INSULATORS: PBT GF UL 94 V-0; BLACK 4. CONTACTS: COPPER ALLOY PLATING: GOLD FLASH over NICKEL 5. THREADED SPACER CLIPS: COPPER ALLOY; min. 200µ in TIN over 80µin NICKEL PCB-HOLE: n 3,1\ 0,1; PCB THICKNESS 1,6mm 6. COLLARS: COPPER ALLOY; min. 200µin TIN over 80 µin NICKEL 7. FRAME: ZINC DIE CAST; NICKEL PLATED 8. O-RING: SILICON; BLUE 9. SEALING COMPOUND: PUR; BLUE 10. HEXLOCKING SCREWS: STAINLESS STEEL 11. P.C.B. HOLE DRILLINGS + RECOMMENDED PANEL CUT-O UT ON SHEET 2 13. CONNECTOR IS PART MARKED: 6STD09SAR99E20X CON EC ABC 16,41 - 0,2 0,05+ 25 - 0,13 0,12+ 39,4 - 0 0,3+ 21,1 -00,3 10° 4,8SW 4-40 UNC 4-40 UNC 4,69,4 5,73 -0,08 0,17 8 - 0,23 0,03+ 3,6 -00,25 8,7 0,3 0,64\ 0,05Ø (9x) 0,25 7,9 0,3 b b b b b

dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 18K2A244 P.C.B. HOLE DRILLINGS SEE SHEET 1 Lehmenkühler29.01.04 D-SUB Female 9pos. Solder pin straight 3:1 SEE SHEET 1 a Original 1 x b Ä4141 26.10.2011 K.H. P.C.B. HOLE DRILLINGS (P.C.B. TOP SIDE) 1 1,42 0,1 2,84 0,1 25 - 0,13 0,12+ 1 - 0 2,74\ 0,1 5,49\ 0,1 1,37\ 0,1 4,11\ 0,1 3,4 R \ 0,13 3,1 0,05 n (2x) 25\ 0,1 11,4 0,1 20,5\ 0,1 B 10°\ 1° A i 0,26 B i 0,26 A RECOMMENDED PANEL CUT-OUT b

dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 18K2A244 D-SUB FEMALE SEE NOTES Lehmenkühler29.04.04

29.04.04 Mickenbecker

15pos. SOLDER PIN STRAIGHT with threaded spacer clip and hexlocking screw 2:1 (5:1) 6STD15SAR99E20X a Original 5 x b Ä4141 26.10.2011 K.H. ( 5 : 1 ) SEE NOTE 13 Directive 2002/95/EC RoHS compliant O-RING SEALING COMPOUND SEE NOTE 7 NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 240 ° C FOR 5 SEC. AND SOLDER PREHEAT 120° C FOR 120 SEC.) 2. METALSHELLS: COPPER ALLOY; min. 315µin TIN ove r 40-80µin NICKEL 3. INSULATORS: PBT GF UL 94 V-0; BLACK 4. CONTACTS: COPPER ALLOY PLATING: GOLD FLASH over NICKEL 5. THREADED SPACER CLIPS: COPPER ALLOY; min. 200µ in TIN over 80µin NICKEL PCB-HOLE: n 3,1\ 0,1; PCB THICKNESS 1,6mm 6. COLLARS: COPPER ALLOY; min. 200µin TIN over 80 µin NICKEL 7. FRAME: ZINC DIE CAST; NICKEL PLATED 8. O-RING: SILICON; BLUE 9. SEALING COMPOUND: PUR; BLUE 10. HEXLOCKING SCREWS: STAINLESS STEEL 11. P.C.B. HOLE DRILLINGS + RECOMMENDED PANEL CUT-O UT ON SHEET 2 13. CONNECTOR IS PART MARKED: 6STD15SAR99E20X CON EC ABC 24,74 - 0,2 0,05+ 33,3 - 0,12 0,13+ 47,7 - 0 0,3+ 21,1 -00,3 10° 4-40 UNC 4-40 UNC 4,69,4 0,25 7,9 0,3 0,64\ 0,05Ø (15x) 4,8SW 8 - 0,23 0,03+ 5,73 -0,08 0,17 3,6 -00,25 8,7 0,3 AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. b b b b b

dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 18K2A244 P.C.B. HOLE DRILLINGS SEE SHEET 3 Lehmenkühler29.01.04 D-SUB Female 15pos. Solder pin straight 3:1 SEE SHEET 3 a Original 1 x b Ä4141 26.10.2011 K.H. 3,1 0,05 n (2x) 28,8\ 0,1 11,4 0,1 3,4 R \ 0,13 B 33,3\ 0,1 10°\ 1° i 0,26 A i 0,26 B A 13,1\ 0,1n (2x) 1 - 0 0,1+n (15x) 2,74\ 0,1 5,49\ 0,1 8,23\ 0,1 9,6\ 0,1 2,84 0,1 6,86\ 0,1 4,11\ 0,1 1,37\ 0,1 1,42 0,1 33,3 - 0,12 0,13+ P.C.B. HOLE DRILLINGS ( P.C.B. TOP SIDE ) RECOMMENDED PANEL CUT-OUT b

dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 18K2A244 D-SUB FEMALE SEE NOTES Lehmenkühler29.01.04 25pos. SOLDER PIN STRAIGHT with threaded spacer clip and hexlocking screw 2:1 (5:1) 6STD25SAR99E20X a Original 5 x b Ä4141 26.10.2011 K.H. 6STD25SAR99E20X CONEC ABC ( 5 : 1 ) Directive 2002/95/EC RoHS compliant 5/8 NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 240 ° C FOR 5 SEC. AND SOLDER PREHEAT 120° C FOR 120 SEC.) 2. METALSHELLS: COPPER ALLOY; min. 315µin TIN ove r 40-80µin NICKEL 3. INSULATORS: PBT GF UL 94 V-0; BLACK 4. CONTACTS: COPPER ALLOY PLATING: GOLD FLASH over NICKEL 5. THREADED SPACER CLIPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n 3,1\ 0,1; PCB THICKNESS 1,6mm 6. COLLARS: COPPER ALLOY; min. 200µin TIN over 80 µin NICKEL 7. FRAME: ZINC DIE CAST; NICKEL PLATED 8. O-RING: SILICON; BLUE 9. SEALING COMPOUND: PUR; BLUE 10. HEXLOCKING SCREWS: STAINLESS STEEL 11. P.C.B. HOLE DRILLINGS + RECOMMENDED PANEL CUT-O UT ON SHEET 2 12. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3. 1 in.LB) / max. 40Ncm (3.5 in.LB) 13. CONNECTOR IS PART MARKED: 6STD25SAR99E20X CON EC ABC AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. 8 - 0,23 0,03+ 5,73 -0,08 0,17 3,6 -00,25 8,7 0,3 SEALING COMPOUND 38,5 - 0 0,25+ 47,04\ 0,13 61,4 - 0 0,3+ 21,1 -00,3 10° 4,8SW 4-40 UNC 4-40 UNC 4,69,4 0,64\` 0,05Ø (25x) O-RING SEE NOTE 13 SEE NOTE 7 0,25 7,9 0,3 b b b b b

dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 18K2A244 P.C.B. HOLE DRILLINGS SEE SHEET5 Lehmenkühler29.01.04 D-SUB FEMALE 25pos. SOLDER PIN STRAIGHT 2:1 SEE SHEET5 a Original 1 x b Ä4141 26.10.2011 K.H. P.C.B. HOLE DRILLINGS ( P.C.B. TOP SIDE ) 47,04\ 0,13 3,1\ 0,1n (2x) 1 - 0 0,1+n (25x) 2,84 0,1 13,82\ 0,1 1,42 0,1 15,19\ 0,1 12,42\ 0,1 9,68\ 0,1 6,91\ 0,1 4,14\ 0,1 1,4\ 0,1 16,56\ 0,1 11,05\ 0,1 8,28\ 0,1 5,54\ 0,1 2,77\ 0,1 3,4 R \ 0,13 11,4 0,1 3,1 0,05 n (2x) 42,5\ 0,1 i 0,26 B B i 0,26 A 47,04\ 0,1 10°\ 1° A RECOMMENDED PANEL CUT-OUTb

dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 18K2A244 D-SUB FEMALE SEE NOTES Lehmenkühler29.01.04 37pos. SOLDER PIN STRAIGHT with threaded spacer clip and hexlocking screw 2:1 (5:1) 6STD37SAR99E20X a Original 5 x b Ä4141 26.10.2011 K.H. 6STD37SAR99E20X CONEC ABC Directive 2002/95/EC RoHS compliant ( 5 : 1 ) NOTES: 1. FOR WAVESOLDERING (SOLDER BATH TEMPERATURE 240 ° C FOR 5 SEC. AND SOLDER PREHEAT 120° C FOR 120 SEC.) 2. METALSHELLS: COPPER ALLOY; min. 315µin TIN ove r 40-80µin NICKEL 3. INSULATORS: PBT GF UL 94 V-0; BLACK 4. CONTACTS: COPPER ALLOY PLATING: GOLD FLASH over NICKEL 5. THREADED SPACER CLIPS: COPPER ALLOY; min. 200µin TIN over 80µin NICKEL PCB-HOLE: n 3,1\ 0,1; PCB THICKNESS 1,6mm 6. COLLARS: COPPER ALLOY; min. 200µin TIN over 80 µin NICKEL 7. FRAME: ZINC DIE CAST; NICKEL PLATED 8. O-RING: SILICON; BLUE 9. SEALING COMPOUND: PUR; BLUE 10. HEXLOCKING SCREWS: STAINLESS STEEL 11. P.C.B. HOLE DRILLINGS + RECOMMENDED PANEL CUT-O UT ON SHEET 2 12. RECOMMENDED TORQUE FOR MOUNTING SCREW 35Ncm (3. 1 in.LB) / max. 40Ncm (3.5 in.LB) 13. CONNECTOR IS PART MARKED: 6STD37SAR99E20X CON EC ABC AT ALL TIMES WATER RESISTANT CONNECTORS NOT IN USE SHOULD BE COVERED WITH A CONEC WATER RESISTANT CAP OR WATER TIGHT HOOD. 8 - 0,23 0,02+ 5,73 -0,08 0,17 +3,6 -00,25 8,7 0,3 SEALING COMPOUND 54,94 - 0,23 0,02+ 63,5\ 0,13 78 - 0 0,3+ 21,1 -00,3 10° 4-40 UNC 4-40 UNC 4,69,4 0,64\` 0,05Ø (37x) 0,25 7,9 0,3 O-RING SEE NOTE 13 SEE NOTE 7 4,8SW b bb b b

dim. in mm RR RR date drawn THIS DRAW ING MAY NOT BE COPIED OR REPRODUCED IN ANY WAY, AND MAY NOT BE PASSED ON TO A THIRD PARTY WITHOUT WRITTEN PERMISSION. OWNERSHIP AND COPYRIGHT OF CONEC GmbH d-old norm appd. tolerance material: title: dwg no: DIN- sh: part no: namedate namedescriptionrev.DO NOT ALTER CAD DRAWING BY HAND scale: 18K2A244 P.C.B. HOLE DRILLINGS SEE SHEET 7 Lehmenkühler29.01.04 D-SUB FEMALE 37pos. SOLDER PIN STRAIGHT 2:1 SEE SHEET 7 a Original 1 x b Ä4141 26.10.201 K.H. P.C.B. HOLE DRILLINGS ( P.C.B. TOP SIDE ) Directive 2002/95/EC RoHS compliant 1 - 0 0,1+n (37x) 3,1\ 0,1n (2x) 23,47\ 0,1 20,7\ 0,1 17,96\ 0,1 15,19\ 0,1 12,42\ 0,1 9,68\ 0,1 6,91\ 0,1 4,14\ 0,1 1,4\ 0,1 24,84\ 0,1 22,1\ 0,1 19,33\ 0,1 16,56\ 0,1 13,82\ 0,1 11,05\ 0,1 8,28\ 0,1 5,54\ 0,1 2,77\ 0,1 63,5\ 0,13 3,1 0,05 n (2x) 59,1\ 0,1 3,4 R \ 0,13 11,4 0,1 B 63,5\ 0,1 10°\ 1° i 0,26 A i 0,26 B A 1,42 0,1 2,84 0,1 RECOMMENDED PANEL CUT-OUT b