5D YAGEO
Document overview
- PDF pages: 13
Technical content
Page 1

DATA SHEET
POWER SUPPLY 05D series
RoHS compliant & Halogen free
Page 2

Metal Oxide Varistor (MOV) Data Sheet
Features

■ Wide operating voltage (V1mA) range from 18V to 750V ■ Fast responding to transient over-voltage ■ Large absorbing transient energy capability ■ Low clamping ratio and no follow-on current ■ Meets MSL level 1, per J-STD-020 ■ Operating Temperature:-40℃ ~ +105℃ ■ Storage Temperature:-40℃ ~ +125℃ ■ Safety certification:UL、CSA、VDE
Applications
■ Transistor, diode, IC, thyristor or triac semiconductor protection ■ Surge protection in consumer electronics ■ Surge protection in industrial electronics ■ Surge protection in electronic home appliances, gas and petroleum appliances ■ Relay and electromagnetic valve surge absorption
Part Number Code
4 7 1
K D 0 5
J
O

Tolerance
Type
Surge Series
D: Disk
No suffix: Standard type
Varistor Voltage
J: High Surge type
180: 18V 101: 100V
Element Diameter 05
TR
Packing No suffix: Bulk TB: Tape & Box & P0=12.7mm TR: Tape & Reel & P0=12.7mm
Lead Shape No suffix: Straight leads O: Outside crimped leads F: Y Kinked leads
Page 3

Dimensions



T
T

O Type
| Table 2 Unit: mm | |||||
|---|---|---|---|---|---|
| Model | T | e | Model | T | e |
| 180K | 1.5~4.5 | 1.3 | 221K | 2.0~4.5 | 1.9 |
| 220K | 1.6~4.6 | 1.4 | 241K | 2.1~4.6 | 2.0 |
| 270K | 1.6~4.7 | 1.6 | 271K | 2.1~4.9 | 2.2 |
| 330K | 1.7~4.9 | 1.5 | 301K | 2.2~5.0 | 2.3 |
| 390K | 1.6~4.8 | 1.6 | 331K | 2.2~5.1 | 2.3 |
| 470K | 1.7~4.9 | 1.7 | 361K | 2.4~5.2 | 2.5 |
| 560K | 1.8~5.0 | 1.9 | 391K | 2.5~5.4 | 2.6 |
| 680K | 1.9~5.2 | 2.2 | 431K | 2.7~5.7 | 2.8 |
| 820K | 1.6~4.1 | 1.6 | 471K | 2.8~6.0 | 3.0 |
| 101K | 1.9~4.3 | 1.8 | 511K | 2.9~6.2 | 3.2 |
| 121K | 1.9~4.5 | 2.0 | 561K | 3.1~6.5 | 3.4 |
| 151K | 1.7~4.8 | 1.6 | 621K | 3.3~6.5 | 3.7 |
| 181K | 1.8~4.3 | 1.7 | 681K | 3.5~6.8 | 4.0 |
| 201K | 1.9~4.4 | 1.8 | 751K | 3.8~6.9 | 4.1 |
| Table 1 Unit: mm | |
|---|---|
| Symbol | Dimension |
| H | 5.5~10.0 |
| H1 | 8.0~13.0 |
| L(min.) | 20.0 |
| L1(min.) | 15.0 |
| D | 5.0~7.5 |
| F(±0.8) | 5.0 |
| T | Table 2 |
| e(±0.8) | Table 2 |
| d(±0.05) | 0.6 |
| d1(±0.4) | 1.2 |
Page 4

Electrical Characteristics
| Part Number | Maximum Allowable Voltage | Varistor Voltage | Maximum Clamping Voltage | Withstanding Surge Current | Maximum Energy (10/1000μs) | Rated Power | Typical Capacitance (Reference) | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Standard | High Surge | V (V) AC | V (V) DC | V (V) 1mA | I (A) P | V (V) C | I (A) Standard | I (A) High Surge | (J) Standard | (J) High Surge | (W) | @1KHz (pf) |
| 180KD05 | 180KD05J | 11 | 14 | 18(15~21.6) | 1 | 40 | 100 | 250 | 0.4 | 0.6 | 0.01 | 1400 |
| 220KD05 | 220KD05J | 14 | 18 | 22(19.5~26) | 1 | 48 | 100 | 250 | 0.5 | 0.7 | 0.01 | 1150 |
| 270KD05 | 270KD05J | 17 | 22 | 27(24~31) | 1 | 60 | 100 | 250 | 0.6 | 0.9 | 0.01 | 930 |
| 330KD05 | 330KD05J | 20 | 26 | 33(29.5~36.5) | 1 | 73 | 100 | 250 | 0.8 | 1.1 | 0.01 | 760 |
| 390KD05 | 390KD05J | 25 | 31 | 39(35~43) | 1 | 80 | 100 | 250 | 0.9 | 1.2 | 0.01 | 640 |
| 470KD05 | 470KD05J | 30 | 38 | 47(42~52) | 1 | 104 | 100 | 250 | 1.1 | 1.5 | 0.01 | 530 |
| 560KD05 | 560KD05J | 35 | 45 | 56(50~62) | 1 | 123 | 100 | 250 | 1.3 | 1.8 | 0.01 | 450 |
| 680KD05 | 680KD05J | 40 | 56 | 68(61~75) | 1 | 145 | 100 | 250 | 1.6 | 2.2 | 0.01 | 370 |
| 820KD05 | 820KD05J | 50 | 65 | 82(74~90) | 5 | 150 | 400 | 800 | 2.5 | 4.0 | 0.1 | 300 |
| 101KD05 | 101KD05J | 60 | 85 | 100(90~110) | 5 | 177 | 400 | 800 | 3.0 | 4.1 | 0.1 | 250 |
| 121KD05 | 121KD05J | 75 | 100 | 120(108~132) | 5 | 210 | 400 | 800 | 4.0 | 4.9 | 0.1 | 210 |
| 151KD05 | 151KD05J | 95 | 125 | 150(135~165) | 5 | 260 | 400 | 800 | 4.1 | 6.5 | 0.1 | 165 |
| 181KD05 | 181KD05J | 115 | 150 | 180(162~198) | 5 | 320 | 400 | 800 | 4.9 | 7.5 | 0.1 | 140 |
| 201KD05 | 201KD05J | 130 | 170 | 200(180~220) | 5 | 355 | 400 | 800 | 6.5 | 8.5 | 0.1 | 125 |
| 221KD05 | 221KD05J | 140 | 180 | 220(198~242) | 5 | 380 | 400 | 800 | 7.5 | 9.0 | 0.1 | 110 |
| 241KD05 | 241KD05J | 150 | 200 | 240(216~264) | 5 | 415 | 400 | 800 | 8.0 | 10.5 | 0.1 | 100 |
| 271KD05 | 271KD05J | 175 | 225 | 270(243~297) | 5 | 475 | 400 | 800 | 8.5 | 11.0 | 0.1 | 95 |
| 301KD05 | 301KD05J | 190 | 250 | 300(270~330) | 5 | 520 | 400 | 800 | 9.0 | 12.0 | 0.1 | 85 |
| 331KD05 | 331KD05J | 210 | 275 | 330(297~363) | 5 | 570 | 400 | 800 | 9.5 | 13.0 | 0.1 | 75 |
| 361KD05 | 361KD05J | 230 | 300 | 360(324~396) | 5 | 620 | 400 | 800 | 10.0 | 16.0 | 0.1 | 70 |
| 391KD05 | 391KD05J | 250 | 320 | 390(351~429) | 5 | 675 | 400 | 800 | 12.0 | 17.0 | 0.1 | 65 |
| 431KD05 | 431KD05J | 275 | 350 | 430(387~473) | 5 | 745 | 400 | 800 | 13.0 | 20.0 | 0.1 | 60 |
| 471KD05 | 471KD05J | 300 | 385 | 470(423~517) | 5 | 810 | 400 | 800 | 15.0 | 21.0 | 0.1 | 55 |
| 511KD05 | 511KD05J | 320 | 415 | 510(459~561) | 5 | 845 | 400 | 800 | 16.0 | 22.5 | 0.1 | 50 |
| 561KD05 | 561KD05J | 350 | 460 | 560(504~616) | 5 | 920 | 400 | 800 | 16.8 | 24.0 | 0.1 | 45 |
| 621KD05 | 621KD05J | 385 | 505 | 620(558~682) | 5 | 1025 | 400 | 800 | 17.7 | 25.0 | 0.1 | 40 |
| 681KD05 | 681KD05J | 420 | 560 | 680(612~748) | 5 | 1120 | 400 | 800 | 21.0 | 29.0 | 0.1 | 35 |
| 751KD05 | 751KD05J | 460 | 615 | 750(675~825) | 5 | 1240 | 400 | 800 | 22.4 | 32.0 | 0.1 | 30 |
Notes: 1. The tolerance of varistor voltage between 18V and 27V is more than 10%. 2. Leakage Current (@83% of V1mA):IR≤50μA (180K~680K) IR≤25μA (820K~751K)
Page 5

Maximum Surge Current Derating Curve
| 180KD05 to 680KD05 10000 1000 (A) Current 100 1 2 10 Surge 102 103 10 104 Max. 105 106 1 0.1 10 100 1000 10000 Td (μs) | 820KD05 to 751KD05 10000 1000 1 (A) 2 Current 100 10 102 103 104 Surge 105 10 106 Max. 1 0.1 10 100 1000 10000 Td (μs) |
|---|---|
| 180KD05J to 680KD05J 10000 1000 (A) 1 Current 100 2 10 Surge 102 103 10 104 Max. 105 106 1 0.1 10 100 1000 10000 Td (μs) | 820KD05J to 751KD05J 10000 1000 1 2 (A) 10 Current 102 100 103 104 105 Surge 106 10 Max. 1 0.1 10 100 1000 10000 Td (μs) |
Page 6

Maximum Leakage Current and Maximum Clamping Voltage Curve

Page 7

Maximum Leakage Current and Maximum Clamping Voltage Curve

Page 8

Reliability
| Items | Standard | Test conditions / Methods | Specifications |
|---|---|---|---|
| Tensile Strength of Terminals | IEC60068-2-21 | Gradually applying the force specified and keeping the unit fixed for 10±1 sec. Terminal diameter (mm) Force (kg) 0.5<d≤0.8 1.0 0.8<d≤1.25 2.0 1.25<d 4.0 | No visible damage |ΔV 1mA/V1mA |≤5% |
| Bending Strength of Terminals | IEC60068-2-21 | Hold specimen and apply the force specified below to each lead. Bend the specimen to 90°, then return to the original position. Repeat the procedure in the opposite direction. Terminal diameter (mm) Force (kg) 0.5<d≤0.8 0.5 0.8<d≤1.25 1.0 1.25<d 2.0 | No visible damage |ΔV 1mA/V1mA |≤5% |
| Vibration | IEC60068-2-6 | Frequency range: 10~55 Hz Amplitude: 0.75mm or 98m/s2 Direction: 3 mutually perpendicular directions, 2hrs each. | No visible damage |ΔV 1mA/V1mA |≤5% |
| Solderability | IEC60068-2-20 | Solder Temp: 245±5℃ Dipping Time: 2±0.5 sec | At least 95% of terminal electrode is covered by new solder |
| Resistance to Soldering Heat | IEC60068-2-20 | Solder Temp: 260±5℃ Dipping Time: 10±1 sec | No visible damage |ΔV 1mA/V1mA |≤5% |
| High Temperature Storage | IEC60068-2-2 | Ambient Temp: 125±2℃ Duration: 1000±24hrs | No visible damage |ΔV 1mA/V1mA |≤5% |
| Low Temperature Storage | IEC60068-2-1 | Ambient Temp: -40±2℃ Duration: 1000±24hrs | No visible damage |ΔV 1mA/V1mA |≤5% |
| Damp Heat, Steady State | IEC60068-2-78 | The test is divided into two groups . a. 40±2℃ , 90~95% RH for 1344±24hrs b. 40±2℃ , 90~95% RH,at 10%VDC ,1344±24 hrs | No visible damage |ΔV 1mA/V1mA|≤10% Insulation Resistance≧100MΩ |
| High Temperature Load | MIL-STD-202 Method 108 | Ambient Temp: 105±2℃ Duration: 1000±24hrs Load: Max. Allowable Voltage In AC. | |ΔV 1mA/V1mA|≤10% |
| Temperature Cycle | IEC60068-2-14 | The conditions shown below shall be repeated 5 cycles Step Temperature (℃) Period (minutes) 1 -40±3 30±3 2 Room temperature 5±3 3 125±3 30±3 4 Room temperature 5±3 | No visible damage |ΔV 1mA/V1mA |≤5% |
| 8/20uS Surge Life | IEC61051-1 | 8/20µS waveform,10 surge currents, unipolar, interval 30secs,amplitude corresponding to max. surge current derating curves for 20µS. | No visible damage △Vb(1mA)≦±10% |
| 10/1000µS Surge Life | IEC61051-1 | 10/1000µS waveform,10 surge currents, unipolar, interval 2mins,amplitude corresponding to max. surge current derating curves for 1000µS. | No visible damage |ΔV 1mA/V1mA |≤10% |
| Voltage Proof | IEC61051-1 | Metal balls method, 2500Vac 1 min. | No visible damage |
| Step | Temperature (℃) | Period (minutes) |
|---|---|---|
| 1 | -40±3 | 30±3 |
| 2 | Room temperature | 5±3 |
| 3 | 125±3 | 30±3 |
| 4 | Room temperature | 5±3 |
Page 9

Soldering Recommendation



| Item | Conditions |
|---|---|
| Peak Temperature | 265℃ |
| Dipping Time | 10 seconds (max.) |
| Soldering | 1 time |
Recommendation Reworking Conditions with Soldering Iron


| Item | Conditions |
|---|---|
| Temperature of Soldering Iron-tip | 360℃ (max.) |
| Soldering Time | 3 seconds (max.) |
| Distance from Varistor | 2mm (min.) |
Marking Code

Page 10

Taping Dimensions
| P2 P h B W2 H0 W0 W D0 I P1 F W1 P0 t | Symbol | Dimension (mm) |
| P | 12.7±1.0 | |
| P0 | 12.7±0.3 | |
| P1 | 3.85±0.7 | |
| P2 | 6.35±1.3 | |
| F | 5.0±0.8 | |
| h | 0±2 | |
| W | 18.0±1.0 | |
| W0 | 12.0±1.0 | |
| W1 | 9.0±0.5 | |
| W2 | 3.0max | |
| H0 | 16.0±1.0 | |
| I | 2.0max | |
| D0 | 4.0±0.2 | |
| t | 0.6±0.3 | |
| B | 32max |
| P2 P h B W2 H0 W0 W D0 I P1 F W1 P0 t | Symbol | Dimension (mm) |
| P | 12.7±1.0 | |
| P0 | 12.7±0.3 | |
| P1 | 3.85±0.7 | |
| P2 | 6.35±1.3 | |
| F | 5.0±0.8 | |
| h | 0±2 | |
| W | 18.0±1.0 | |
| W0 | 12.0±1.0 | |
| W1 | 9.0±0.5 | |
| W2 | 3.0max | |
| H0 | 16.0±1.0 | |
| I | 2.0max | |
| D0 | 4.0±0.2 | |
| t | 0.6±0.3 | |
| B | 32max |
Page 11

Taping Dimensions
| P2 P h B W2 H2 W0 W D0 I P1 F W1 P0 t | Symbol | Dimension (mm) |
| P | 12.7±1.0 | |
| P0 | 12.7±0.3 | |
| P1 | 3.85±0.7 | |
| P2 | 6.35±1.3 | |
| F | 5.0±0.8 | |
| h | 0±2 | |
| W | 18.0±1.0 | |
| W0 | 12.0±1.0 | |
| W1 | 9.0±0.5 | |
| W2 | 3.0max | |
| H2 | 20.0±2.0 | |
| I | 2.0max | |
| D0 | 4.0±0.2 | |
| t | 0.6±0.3 | |
| B | 32max |
Quantity
| Packaging Dimensions (Unit: mm) | Quantity |
|---|---|
| In bulk for Terminals Untrimmed Products Max. 130 Max. 165 250 Max. | 1000pcs/bag 4bags/box (180K~751K) |
| In bulk for Terminals Trimmed Products ax. M 66 Max. 165 252 Max. | 1000pcs/bag 4bags/box (180K~751K) |
Page 12

Quantity
| Packaging Dimensions (Unit: mm) | Quantity |
|---|---|
| Tape & Box & P0=12.7mm ax. M 60 Max. 250 340 Max. | 1500pcs/box (180K~391K) |
| 1000pcs/box (431K~751K) | |
| Tape & Reel & P0=12.7mm ax. M 60 Max. 365 365 Max. 55 Max. 30±1 Φ365 Max. | 2000pcs/reel (180K~391K) |
| 1500pcs/reel (431K~751K) |
Page 13

Legal Disclaimer
YAGEO, its distributors and agents (collectively, “YAGEO”), hereby disclaims any and all liabilities for any errors, inaccuracies or incompleteness contained in any product related information, including but not limited to product specifications, datasheets, pictures and/or graphics. YAGEO may make changes, modifications and/or improvements to product related information at any time and without notice.
YAGEO makes no representation, warranty, and/or guarantee about the fitness of its products for any particular purpose or the continuing production of any of its products. To the maximum extent permitted by law, YAGEO disclaims (i) any and all liability arising out of the application or use of any YAGEO product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for a particular purpose, non -infringement and merchantability.
YAGEO products are designed for general purpose applications under normal operation and usage conditions. Please contact YAGEO for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property: Aerospace equipment (artificial satellite, rocket, etc.), Atomic energy-related equipment, Aviation equipment, Disaster prevention equipment, crime prevention equipment, Electric heating apparatus, burning equipment, Highly public information network equipment, data -processing equipment , Medical devices, Military equipment, Power generation control equipment, Safety equipment, Traffic signal
equipment, Transportation equipment and Undersea equipment, or for any other application or use in which the failure of YAGEO products could result in personal injury or death, or serious property damage. Particularly YAGEO Corporation and its affiliates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space flight.
Information provided here is intended to indicate product specifications only. YAGEO reserves all the rights for revising this content without further notification, as long as products are unchanged. Any product change will be announced by PCN.